Distributed channel assignment strategies using coexistenceetiquettes for land based radio environment

The performance of two distributed channel assignment algorithms which use coexistence etiquettes for point to point links are considered by the authors. It has been found that selecting channels prior to transmission at the transmitter as opposed to the receiver, supports greater offered traffic with the additional advantage of a less complex protocol     

Calculation of unbalanced magnetic pull in small cage inductionmotors with skewed rotors and dynamic rotor eccentricity

This paper sets out a simple analytical model which is able to account for the damping effects of a cage rotor on the unbalanced magnetic pull (UMP) when the rotor is dynamically eccentric. The algorithm is implemented for a 4-pole cage induction motor with a variety of rotors with different rotor eccentricity and skew. The model is verified by the assessment of the UMP vibration when the different rotors are fitted in the stator. The characteristics are compared and it is found that the predicted and measured UMP characteristics compare well. It is observed that skewing the rotor cage increases the UMP when the motor is loaded     

An X-ray photoelectron spectroscopic investigation into the chemical structure of deposits formed from hexamethyldisiloxane/ oxygen plasmas

The effect of oxygen addition to microwave-sustained plasmas of hexamethyldisiloxane (HMDSO) has been investigated. Attention was directed to the solid products formed on aluminium substrates (plasma deposits). To enable a quantitative analysis of these, X-ray photoelectron spectroscopy (XPS) of standard silicon-containing materials was carried out. When suitable charge correction is applied to the XP spectra of HMDSO/O₂ plasma deposits, a number of very clear trends emerge. From changes in elemental composition, core line binding energies (Si2p, C 1s, and O 1s) and widths, we show how oxygen addition to the plasma affects the chemical nature of the plasma deposit. The data reported also provide (some limited) information on the reactions taking place in the plasma.     

Thermally insulating behaviour of single and multiple layers of textiles under wind assault

One or more layers of textiles can provide a thermal resistance between the human body and its environment, and so help maintain the body in a thermally comfortable state. The effect of wind on and its penetration through such thermal cladding is examined experimentally.     

Accelerated vibratory fatigue test by ultrasonic frequency at cryogenic temperature

The fatigue test is a time-consuming experiment. The accelerated fatigue testing technique is a dream for all researchers. In our laboratory, a vibratory fatigue testing machine was built, which works at 20 kHz for R = −1 and permits to carry out tests at cryogenic temperature. This is an automatic machine controlled by a PC computer. By using this apparatus, it is easy to save time by 400 to 500 times and a lot of liquid air (nitrogen or helium).

A titanium alloy, Ti6A14V (TA6V PQ french mark), was tested in liquid nitrogen (77 K) with this machine for S---N curve. At the same time, other fatigue tests were performed in SEP (Société Européenne de Propulsion) in conventional fatigue for the same material and the same conditions except the frequency. The comparison shows that the results are coherent.     

Alignment of fluorescent molecules vapour-deposited on to highly oriented PTFE substrates

The alignment of six fluorescent materials (p-terphenyl, p-quaterphenyl, p-quinquephenyl, diphenylstilbene, 1,4-bis(2-methylstyryl)benzene, and 1,4-bis-2-(5-phenyloxazolyl)benzene) grown from the vapour phase on to friction-deposited, highly oriented poly(tetrafluoroethylene) (PTFE) films was studied. The dichroic ratio of the fluorescent films produced was determined by polarized spectroscopic fluorescence measurements, and the crystallographic orientation of these materials was determined by transmission electron microscopy. The measured dichroic ratios ranged from 1.7 for diphenylstilbene to 5.0 for the p-quaterphenyl film. Electron diffraction patterns revealed that five of the fluorescent materials grew epitaxially on the single crystal-like PTFE films, the fluorescent crystals adopting particular orientations with respect to the crystallographic planes of PTFE. On the other hand, crystals of 1,4-bis-2-(5-phenyloxazolyl) benzene aligned in a fibre pattern, apparently by a grapho-epitaxial mechanism.     

The stability of LaNi5 in a Cu matrix

The reaction of LaNi₅ with Cu powder during sintering at high temperature was examined in order to obtain better conductivity and ductility. Pressurized and forged copper-LaNi₅ pellets were investigated by optical metallography, DTA, XRD and TEM. The need for heat treatment after pressing and/or forging is vital to obtain good diffusion bonding between the copper particles and to improve the material strength. No interaction between La, Ni and Cu were observed after heating at 1173 K but a very stable La₂O₃ phase was created around the LaNi₅ particle. Rolling up to 85% reduction showed good ductility.     

Calibration and testing facility for resistance welding currentmonitors

The lack of uniform and traceable measurement of pulsed high currents (1-200 kA) utilized in the resistance welding process has long been a problem in the welding community. A testing facility utilizing equipment and knowledge gained in the Department of Energy programs is being made available to the American welding industry to solve these problems. Problems in making these measurements traceable to national standards and proposed solutions are presented. Test equipment and methods are described that will be used to evaluate current-sensing coils and weld-current monitors. Comparison of positional errors for various current-sensing coils is presented, including a recently developed, machinable Rogowski coil     

A theory for the formation of tetrahedral amorphous carbon including deposition rate effects

A theoretical model is presented to describe the effect of ion beam bombardment rate on the formation of tetrahedral amorphous carbon (ta-C) films. The critical ion energy, E_c, corresponding to a 50% sp³ content in the films, is found to be dependent on both the effective thermal resistance and the ion beam bombardment rate. In the model, the ‘window’ width in the ion energy scale for the formation of ta-C material increases with decreasing deposition rate and with a reduction in the effective thermal resistance, until limited by lower and upper boundary thresholds. Experimental data are reproduced by the model. The plasmon energy, which correlates with sp³ fraction, is found experimentally of be higher for lower deposition rate and smaller effective thermal resistance. Data points for high sp³ content ta-C films deposited on silicon substrates at room temperature occupy a region in the ion energy-deposition rate (E-r) diagram similar to that predicated from the theory.