The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation

Modification of the eutectic Si in Al-Si foundry alloys by adding strontium or sodium is, unfortunately, accompanied by an increase of porosity in the casting. In an attempt to understand the nature of this problem, this study used a sessile-drop method to investigate the effect of Sr and Na on surface tension and volumetric shrinkage, two probable causes of porosity occur-rence. The addition of 0.01 wt pct Sr and 0.005 wt pct Na to A356 alloy decreases the surface tension of the liquid by about 19 and 10 pct, respectively, and may increase the volume shrink-age by about 12 pct. These changes to surface tension and volumetric shrinkage promote the early formation of the pores during solidification and give the availability of a longer period of growth prior to complete solidification, resulting in a larger pore size. The effect of surface tension on the pores is more significant than volumetric shrinkage. Although the predicted pore diameter increases with lower surface tension or higher volumetric shrinkage, these two effects alone do not seem able to completely account for the observed increase in porosity that is associated with modification.     

Gas-phase modification of rare-earth intermetallic compounds

Recent work concerning the interstitial modification of permanent magnet alloys based on rare-earth iron intermetallic compounds is reviewed. The crystal structure of the new materials is discussed, then the thermodynamic and statistical aspects of the low-temperature interstitial modification process are considered. Finally, reaction kinetics and thermal stability of the new compounds are discussed and future prospects assessed.     

Torsion of an elastic space with a crack on the surface of revolution

Numerical methods for solving integral equations of an axisymmetric problem of torsion of an elastic space with cracks on the surface of revolution are suggested for the cases of cracks crossing the axis of symmetry and cracks that have no common points with this axis. We also present relations for calculating the stress intensity factors at crack tips. Numerical results are obtained for a conic or paraboloidal simply connected crack and for a doubly connected crack lying on a surface formed by the revolution of an arbitrarily oriented straight segment or a parabolic arc. The crack faces are either subjected to a constant load or free of any forces; the body is subjected to torsion at infinity.Karpenko Physico-Mechanical Institute, Ukrainian Academy of Sciences, L'viv. Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 29, No. 6, pp. 87–93, November–December, 1993.     

The domain composition method applied to Poisson's equation in two dimensions

Domain composition, a recently described method for formulating continuum field problems, removes certain restrictions on the construction of finite element models such that it is possible to solve a finite element problem without using a global compatible mesh. The domain composition method couples or otherwise constrains meshes in local regions to obtain a solution equivalent to that produced by conventional finite element methods. In particular, the domain composition method enables finite element models to be formulated with overlapping elements. Several advantages come from this, including an ability to automatically generate a finite element model from a solid geometric model, an ability to use a variety of element types in a single finite element model and an ability to exactly match element boundaries to the local geometry. This paper shows in detail a finite element formulation of Poisson's equation using domain composition and presents certain key algorithms that incorporate the domain composition method into well-established finite element procedures.     

Abnormal behavioral responses to fenfluramine in patients with affective and personality disorders. Correlation with increased serotonergic responsivity

Serotonergic responsivity was assessed in 20 psychiatric patients by the prolactin response to a fenfluramine challenge test. During the fenfluramine challenge 6 of 20 patients (30%) spontaneously reported psychopathologic reactions that included: increased anxiety/agitation, psychotic symptoms, illusions, mood elevation, and anergia. The time of peak behavioral symptoms (2.5 +/- 0.8 hrs) corresponded closely to the time of peak increase in prolactin levels (3.0 +/- 1.1 hr). Abnormal behavioral responders had statistically significant greater increases in prolactin 1 to 4 hr after fenfluramine when compared to normal responders. Patients who developed an abnormal psychopathologic response to fenfluramine were characterized by higher levels of anxiety and agitation at the time of admission to the hospital but otherwise were not distinguishable on the basis of severity of other psychiatric symptoms. This study suggests that increased serotonergic transmission may trigger anxiety, psychosis, and mood elevation in specific vulnerable individuals, whereas other patients with similar psychiatric illnesses are not affected.     

Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.