Perspectives on Design and Innovation

A series of studies of top European and other firms has revealed patterns of design management associated with commercial success. Firms that invest resources and professional expertise in product and industrial design in traditional and new industries have been commercially more successful than firms that pay less attention to these aspects of design. As an industry matures there is a shift in emphasis from design associated with technological innovation, to designs supporting technical improvements, and then to supporting user needs, fashion and product variants. These issues are illustrated through the history of the evolution of the bicycle.     

Effects of hydrolysis on the physical properties of short glass-fibre reinforced poly(ethylene terephthalate)

The mechanical fracture strength and toughness of short-fibre composites, injection moulded from compounds of poly(ethylene terephthalate) (PET) containing 10 and 30% (by weight) (w/o) glass, have been investigated and the dependence upon matrix hydrolytic stability determined. Mouldings have been characterised by several physical techniques to evaluate molecular weight, degradation rates, crystallinity and morphology, whilst time-dependent gravimetric data were derived to quantify sorption kinetics and allow comparisons with theoretical reaction rates to be made. During melt processing, PET is hydrolysed extremely rapidly by traces of moisture (<0.02w/o). yet the inherent strength of moulded composites declines significantly only below an apparently critical molecular weight. However, on long-term humid ageing in hot water, impact behaviour especially is rendered more complex by simultaneous crystallisation, molecular reorder and losses of interfacial bond strength.     

Overexpression, purification, and characterization of SHPTP1, a Src homology 2-containing protein-tyrosine-phosphatase

A protein-tyrosine-phosphatase (PTPase; EC 3.1.3.48) containing two Src homology 2 (SH2) domains, SHPTP1, was previously identified in hematopoietic and epithelial cells. By placing the coding sequence of the PTPase behind a bacteriophage T7 promoter, we have overexpressed both the full-length enzyme and a truncated PTPase domain in Escherichia coli. In each case, the soluble enzyme was expressed at levels of 3-4% of total soluble E. coli protein. The recombinant proteins had molecular weights of 63,000 and 45,000 for the full-length protein and the truncated PTPase domain, respectively, as determined by SDS/PAGE. The recombinant enzymes dephosphorylated p-nitrophenyl phosphate, phosphotyrosine, and phosphotyrosyl peptides but not phosphoserine, phosphothreonine, or phosphoseryl peptides. The enzymes showed a strong dependence on pH and ionic strength for their activity, with pH optima of 5.5 and 6.3 for the full-length enzyme and the catalytic domain, respectively, and an optimal NaCl concentration of 250-300 mM. The recombinant PTPases had high Km values for p-nitrophenyl phosphate and exhibited non-Michaelis-Menten kinetics for phosphotyrosyl peptides.     

Development of composite tissue scaffolds containing naturally sourced mircoporous hydroxyapatite

The aims of this work were to investigate the conversion of a marine alga into hydroxyapatite (HA), and furthermore to design a composite bone tissue engineering scaffold comprising the synthesised HA within a porous bioresorbable polymer. The marine alga, Phymatolithon calcareum, which exhibits a calcium carbonate honeycomb structure, with a natural architecture of interconnecting permeable pores (microporosity 4–11 μm), provided the initial raw material for this study. The objective was to convert the alga into hydroxyapatite while maintaining its porous morphology using a sequential pyrolysis and chemical synthesis processes. Semi-quantitative XRD analysis of the post-hydrothermal material (pyrolised at 700–750 °C), indicated that the calcium phosphate (CaP) ceramic most likely consisted of a calcium carbonate macroporous lattice, with hydroxyapatite crystals on the surface of the macropores. Cell visibility (cytotoxicity) investigations of osteogenic cells were conducted on the CaP ceramic (i.e., the material post-hydrothermal analysis) which was found to be non-cytotoxic and displayed good biocompatibility when seeded with MG63 cells. Furthermore, a hot press scaffold fabrication technique was developed to produce a composite scaffold of CaP (derived from the marine alga) in a polycaprolactone (PCL) matrix. A salt leaching technique was further explored to introduce macroporosity to the structure (50–200 μm). Analysis indicated that the scaffold contained both micro/macroporosity and mechanical strength, considered necessary for bone tissue engineering applications.     

A SONET STS-3c user network interface integrated circuit

Two different design implementation techniques were used to produce a functionally complex high performance synchronous optical network (SONET) synchronous transmission signal (STS)-3c (155.52 Mb/s) user network interface (UNI) chip in cost-effective 1 μm CMOS technology. The CMOS chip functions as an STS-3c transmitter and receiver and can interface to the STS-3c line in either bit-serial or byte-parallel data format. The transmitter creates a SONET STS-3c frame structure including the necessary framing and control bytes. The receiver performs frame detection, several performance monitoring functions, and payload processor interpretation. In addition to SONET overheads, both the transmitter and receiver provide payload asynchronous transfer mode (ATM) mapping signals to the user. The user can choose between serial operation at 155.52 Mb/s or parallel operation at 19.44 Mbyte/s. Test results show that the experimental integrated circuit performs successfully at serial data rates of up to 300 Mb/s     

Cuticle chirality and body handedness in Caenorhabditis elegans

BACKGROUND AND PURPOSE: Norway has the highest reported incidence of hip fractures in western Europe. Little is known about the epidemiology of falls in Norway where the winter season is long and dark. The objective of this work was to study reported falls and their consequences among elderly Norwegians living at home. METHODS: A cross-sectional design was used for the study. Interviews were performed in the homes of 431 subjects, aged 67-97 years, living at home. Information on falling was gathered through six questions: whether the subject had fallen during the last six months, and if so, how many falls they had, where the last fall occurred, its perceived reason, the activity the subject had been engaged in when the fall occurred, and the resulting injury. RESULTS: In all, 24.1% of subjects reported falling during the last six months, and 9.5% had suffered more than one fall. Falls were most frequently linked to external events (63.1%). Outdoor falls were more frequent (59.0%; 95% CI = 51.2-82.0) than indoor falls. Older subjects were associated with more frequent indoor falls (p < 0.05), but gender was not significant. Fifty-one per cent of subjects had fallen while walking and 53% had suffered an injury from the last fall. In 13.4% of the women and 16.2% of the men, the last fall had resulted in a fracture. CONCLUSIONS: Compared to the results of other studies from industrialized Western countries, a similar crude fall rate, similar frequency and similar type of injury were found. However, in contrast to other studies, no gender difference was observed with regard to falling, place of falling and fracture rate.     

Cyclosporin A in patients receiving renal allografts from cadaver donors. 1978

A psychrotrophic yeast, Rhodotorula glutinis KUJ 2731, isolated from soil, effectively produced an extracellular endo-beta-glucanase (EC 3.2.1.4). The enzyme was monomeric, and the molecular mass was about 40,000 Da. The N-terminal amino acid sequence was H-Ser-Leu-Pro- Lys-Leu-Gly-Gly-Val-Asp-Leu-Ala-Gly-Leu-Asp-Ile-Gly-Lys-Asp-Lys-Asn-. alpha-Helix content was calculated to be about 32.6%. The isoelectric point was 8.57. The activation energy was 20.9 kJ/mol, which was much smaller than that of mesophilic enzymes. The enzyme was active at temperatures from 0 to 70 degrees C, with a highest initial velocity at 50 degrees C similar to other psychrotrophic enzymes. The enzyme was inhibited by Hg2+. The enzyme catalyzed hydrolysis of carboxymethyl cellulose with an apparent K(m) of 1.1% and Vmax of 556 mumol/min/mg. Products from the enzymatic hydrolysis of carboxymethyl cellulose by the enzyme were glucose, cellobiose, and cellotriose. The enzyme also catalyzed the transglycosylation of p-nitrophenyl-beta-cellotrioside to cellotetraose.