Electrochemically deposited polypyrrole films and their characterization

Ionically conductive polypyrrole films have been deposited at 295 K from anhydrous acetonitrile, acetonitrile/H₂O and NaBF₄ aqueous solutions onto platinum, mild steel and stainless steel discs, using cyclic voltammetry, potentiostatic and galvanostatic techniques. Cyclic voltammetry of the polymer films has been studied as a function of water content of the acetonitrile solvent, polypyrrole concentration and potential sweep rate. Potentiostatic growth of thicker (< 30 micron) films on stainless steel allowed free-standing polypyrrole membranes to be produced. Well adherent and conductive films were deposited at constant potential in stirred solutions from acetonitrile electrolytes containing 1% (v/v) of water. The membrane resistivity of the reduced films in 0.5 mol dm^− 3 KCl_(aq) at 295 K was ≈ 1 × 10⁶ Ω cm, while the resistivity of the oxidised membrane was 2700 Ω cm.     

Automated procedure to determine the thermodynamic stability of a material and the range of chemical potentials necessary for its formation relative to competing phases and compounds

We present a simple and fast algorithm to test the thermodynamic stability and determine the necessary chemical environment for the production of a multiternary material, relative to competing phases and compounds formed from the constituent elements. If the material is found to be stable, the region of stability, in terms of the constituent elemental chemical potentials, is determined from the intersection points of hypersurfaces in an (n−1)$(n-1)$-dimensional chemical potential space, where n$n$ is the number of atomic species in the material. The input required is the free energy of formation of the material itself, and that of all competing phases. Output consists of the result of the test of stability, the intersection points in the chemical potential space and the competing phase to which they relate, and, for two- and three-dimensional spaces, a file which may be used for visualization of the stability region. We specify the use of the program by applying it both to a ternary system and to a quaternary system. The algorithm automates essential analysis of the thermodynamic stability of a material. This analysis consists of a process which is lengthy for ternary materials, and becomes much more complicated when studying materials of four or more constituent elements, which have become of increased interest in recent years for technological applications such as energy harvesting and optoelectronics. The algorithm will therefore be of great benefit to the theoretical and computational study of such materials.     

Studies of space-averaged mass transport in the FM01-LC laboratory electrolyser

Measurements of the mass transport limited current for the reduction of ferricyanide in 1M m potassium hydroxide and of copper(II) in 1.5 m sulphuric acid as a function of electrolyte flow rate are used to characterize the space-averaged mass transport properties of the FM01 laboratory electrolyser, with and without six types of polymer mesh turbulence promoters. In the absence of a promoter, the results followed the equation For the cell with the preferred turbulence promoter, the corresponding equation is Pressure drop data are also reported and it is confirmed that the presence of a turbulence promoter need not lead to a significant increase in the pressure drop over the reactor.     

Cholesterol transport and uptake in miniature swine fed vegetable and animal fats and proteis. 1. Plasma lipoproteins and LDL clearance

In a 2×2 factorial arrangement, miniature pigs were fed four diets containing vegetable protein/fat (soybean) and animal protein (egg white)/fat (beef tallow) to demonstrate the effects of protein and fat source on total plasma cholesterol, lipoprotein distribution, low density lipoprotein (LDL) composition, and plasma clearance of LDL-cholesterol and protein. Beef tallow consumption resulted in greater plasma cholesterol concentration, decreased LDL-cholesterol concentration, and a lower LDL-cholesterol to LDL-protein ratio than did consumption of soybean oil. High density lipoprotein (HDL)-cholesterol concentration was increased by beef tallow consumption. Cholesterol percentage by weight in LDL was significantly greater in pigs consuming soybean oil than those consuming beef tallow. Percentages by weight of protein, triglyceride and phospholipid in LDL were not significantly different in any group. Dietary protein source had no significant effect on total plasma cholesterol concentration, lipoprotein concentration or LDL composition. Egg white consumption decreased fractional catabolic rate and irreversible loss of LDL-cholesterol and LDL-protein when compared with consumption of soy protein. Dietary fat source had no consistent effect on LDL clearance from plasma. Dietary fat and protein seemed to influence lipoprotein metabolism by different mechanisms. Fat source altered lipoprotein concentration and LDL composition, whereas protein source affected the removal rate of LDL from plasma. Data taken from a dissertation submitted to Iowa State University by L. S. Walsh Hentges as partial fulfillment of the requirements for the Ph.D. degree. A preliminary paper, was presented at the meeting of the American Oil Chemists' Society in Dallas, Texas, May, 1984.     

Direct partial oxidation of methane over ZSM-5 catalyst: effects of additives

Previously, it was reported that the direct partial oxidation (DPO) of CH₄ with O₂ over HZSM-5 catalysts produces C₅₊ hydrocarbon liquids when the feed contains a propane or propene additive. This work studies additive effects on C₅₊ production in this system by processing a CH₄/C₃H₈ feed with subsequent removal of the C₃ additive and by processing natural gas feed. Results show C₅₊ production is maintained at constant yields for HZSM-5 catalysts having different zeolitic Al contents after removal of the C₃ additive. Mechanistic implications are discussed. Natural gas DPO consistently produced C₅₊ liquids due to the presence of C₂₊ components in the feed. While C₅₊ yields from natural gas DPO are higher than those observed for CH₄/C₃ feeds, increasing feed O₂ concentration, and thus conversion, deleteriously affected C₅₊ selectivity.     

Small-angle scattering studies of PVC and PVC blends

Small-angle X-ray and small-angle neutron scattering studies have been carried out on poly(vinyl chloride) (PVC), and blends of PVC with solution-chlorinated polyethylene (SCPE) and poly(butyl acrylate) (PBA). The PVC used was commercial (suspension-polymerized) or bulk-polymerized. The blends of PVC with PBA were prepared by solvent-casting and those with SCPE by in situ polymerization. PVC samples show shoulders in the scattering spectra, presumably due to crystallites, which persist even in samples which have been solvent cast. Blends of PVC with PBA also show a peak but at a higher ‘d’ spacing. The blends with SCPE which were prepared by in situ polymerization show no such peak. This suggests that the method of preparation prevents the formation of crystallites. An increase in scattering of the PBA blends was observed when the samples were heated to the temperature of phase separation. Neutron scattering studies were also carried out using 2% deuterium labelled PVC in PVC and in the blends. In the PVC this showed chain dimensions in good agreement with predicted values. In the blends, dimensions of the same order were obtained, confirming a molecular dispersion of chains in the single phase, but there was an apparent reduction in the chain dimensions. This could be explained by a true reduction in dimensions or a non-zero A₂ value in the blends.     

Alternative tribological coatings to electrodeposited hard chromium: a critical review

ABSTRACT

The traditional importance of hard chromium electroplating in surface engineering is recognised and the key features of this well-established technology are summarised. Despite the high hardness, corrosion protection and wear resistance of chromium electrodeposits, a number of alternative coating compositions and application techniques have been developed for specific applications in tribology. Environmental challenges associated with hard chromium electroplating are highlighted and the need to develop and evaluate alternative coatings is stressed. Key examples of the alternative coatings are described, including their method of application, microstructure and tribological performance in controlled service environments. Research needs requiring rapid development are highlighted. A summary is given of the most competitive coatings and those having the potential to match the performance of hard chromium in selected applications are identified.     

Restoration of stormwater retention capacity at the allotment-scale through a novel economic instrument

Urbanisation results in changes to runoff behaviour which, if not addressed, inevitably degrade receiving waters. To date, most stormwater management has focussed on the streetscape and public open space. Given that much of the catchment imperviousness is located on private land, we developed and tested a novel economic instrument (a uniform price auction) for encouraging allotment-scale stormwater retention. We evaluated bids using an integrated environmental benefit index (EBI), based on the ability of the proposed works to reduce runoff frequency, pollutant loads and to reduce potable water demand. The uniform price auction resulted in 1.4 ha of impervious areas being effectively 'disconnected' from the stormwater system. The EBI provided an objective and transparent method of comparing bids, which varied in the type of works proposed (e.g. rainwater tank, rain-garden), the cost and the resulting environmental benefit. Whilst the pilot auction was a success, the public subsidy of works undertaken was around 85%, meaning that property owners a relatively small private benefit in the works. Future auction rounds will be revised to (i) test an EBI which is more focussed on the protection of streams (assessing changes to runoff frequency, baseflow volumes and water quality) and (ii) provide an auction process which is simpler to understand, and provides greater practical support for landholders who wish to undertake works.     

QuickBird and Hyperion data analysis of an invasive plant species in the Galapagos Islands of Ecuador: Implications for control and land use management

In the Galapagos Islands of Ecuador, one of the greatest threats to the terrestrial ecosystem is the increasing number and areal extent of invasive species. Increased human presence on the islands has hastened the introduction of plant and animal species that threaten the native and endemic flora and fauna. Considerable research on invasive species in the Galapagos Islands has been conducted by the Charles Darwin Foundation. We complement that work through a spatially- and spectrally-explicit satellite assessment of an important invasive plant species (Psidium guajava — guava) on Isabela Island that integrates diverse remote sensing systems, data types, spatial and spectral resolutions, and analytical and image processing approaches. QuickBird and Hyperion satellite data are processed to characterize the areal extent and spatial structure of guava through the following approaches: (1) QuickBird data are classified through a traditional pixel-based approach (i.e., an unsupervised classification approach using the ISODATA algorithm), as well as an Object-Based Image Analysis (OBIA) approach; (2) multiple approaches for spectral “unmixing” of the Hyperion hyper-spectral data are assessed to construct spectral end-members from QuickBird data using linear and non-linear mixture modeling approaches; and (3) landscape pattern metrics are calculated and compared for the pixel-based, object-based, and spectral unmixing approaches. The spectral–spatial characteristics of guava are interpreted relative to management strategies for the control of guava and the restoration of natural ecosystems in the Galapagos National Park.     

A new method of intestinal salvage for severe small bowel ischemia

The morbidity and mortality in short bowel syndrome are directly related to the length of the remaining small bowel and to the duration of total parenteral nutrition. We describe the successful salvage of an infant with extensive small bowel infarction for whom a new technique was used to preserve all viable mucosal surfaces. The infant, with gastroschisis, was found to have a tight volvulus of the extruded bowel and extensive small bowel ischemia at the time of delivery. Forty-eight hours after reduction of the volvulus and abdominal decompression, a second-look laparotomy was performed. Although only the terminal 13 cm of ileum was completely viable, 25% of the circumference of a further 23 cm of proximal jejunum/ileum was considered salvageable. After debridement of the dead tissue, the remaining gutter of jejunum was divided at its midpoint, and the two halves were anastomosed longitudinally to provide a "neojejunum" of 12 cm in length, which was anastomosed between the duodenum and terminal ileum. Full enteral feeding was tolerated from day 47. Although the neojejunum was excised on day 149, after becoming dilated and atonic, by that time the remaining small bowel had elongated to 30 cm. Because of the early institution of full enteral feeding, there were no long-term complications related to total parenteral nutrition.