APPLICATION OF A PERTURBATION THEORY FOR EVALUATION ALGORITHMS FOR IDENTIFICATION OF A CONTINUOUS PLANT FROM DISCRETE DATA

Abstract

A perturbation theory for evaluation algorithms of arithmetic expressions is applied to the generalized least-squares identification of the continuous parameters by using nonperiodic discrete data. The sampling instants are distributed in such a way that a sequence of the elemental arithmetic expressions of the identification algorithm are suboptimized according to bang-bang rules on the extrema of appropriate variation intervals. The weighting scalars in the generalized least-squares method are updated with the same purpose.     

SWITCHING MECHANISMS IN A GENERALIZED INFORMATION SYSTEM

Abstract

A generalized information system has recently been proposed     

GEOSTATIONARY STATION-KEEPING BY ION THRUSTERS: GENETIC ALGORITHMS OPTIMIZATION

The orbital control of geostationary satellites requires the periodic execution of manoeuvres for gravitational and solar radiation perturbation compensation. To maintain a fine control of the satellite position, it is usually sufficient to perform orbit corrections every two weeks, firing chemical thrusters. The operational load for the manoeuvre's planning and execution is usually quite low. Innovative technologies for station-keeping are available now, based on high efficiency ion thrusters, which allow a significant propellant saving. They are included in Artemis, a telecommunications satellite developed by the European Space Agency. When low acceleration ion thrusters are adopted, a near continuous orbit control is required; the resulting long firing arcs can be in conflict with some operational or technical constraints. The station-keeping planning is a critical process, since it is not based on periodic impulsive manoeuvres, but rather on quasi-continuous firings. Furthermore the orbit control should be planned more on a seasonal or a yearly cycle rather than on short weekly cycles. Since each manoeuvre is defined by its start time and duration, the total number of parameters involved in a station-keeping optimization process amounts to several tens. The presence of many variables and logical constraints makes the use of classical optimization methods quite complex. The model proposed here is based on genetic algorithms, which allows the convergence to an optimum solution through successive iterations, in which a random set of solutions is progressively selected on the basis of a factor of merit tailored to the target. This paper presents some innovative concepts for station-keeping optimization when ion propulsion is adopted for orbital control; furthermore, the general properties of genetic algorithms are discussed, together with the results obtained in the specific station-keeping application.     

Analysis of hexamidine, dibromohexamidine, dibromopropamidine and chlorhexidine in cosmetic products by high-performance liquid chromatography

A method of determining qualitatively and quantitatively hexamidine, dibromohexamidine, dibromopropamidine and chlorhexidine in cosmetic products by means of paired ion, reverse-phase high-performance liquid chromatography (HPLC) and ultraviolet detection (UV) at 264 nm.
Détermination de l'hexamidine, du dibromohexamidine, du dibromopropamidine et de la chlorhexidine dans les produits cosmétiques     

大青叶抗菌物质提取及抗菌效果研究

研究了用水浸提法抽提大青叶中抗菌物质的方法，并通过抑菌实验检验了对细菌和霉菌的抑菌能力。正交实验结果表明最佳抽提工艺为：料水比1：20，加热时间40min，回流温度100℃：滤纸片法抑菌实验发现：大青叶提抽浓缩液(浓缩比为5：1)对大肠杆菌及枯草杆菌的最低抑菌浓度为2．77％(ml，100ml)左右，青霉，黄曲霉为0．55％(ml／100ml)左右，金黄色葡萄球为0．055％(ml／100ml)左右。     

运用模糊聚类分析方法整编翰林桥站流量资料初探

主要对水文资料整编采用模糊聚类分析的方法进行尝试，利用计算机定线，使得水文资料整编全面计算机化作了初步的探索，取得一定的效果。     

Inhibition effect of CO on hydrogen permeability of Pd–Ag membrane applied in a microchannel module configuration

The surface adsorption effect of CO on the hydrogen permeability of a 12.5 micron-thick Pd₇₇Ag₂₃ membrane has been evaluated quantitatively under experimental conditions close to the operating conditions of the highly-efficient membrane reformer (MRF) system developed by Tokyo Gas. The permeability of the membrane was measured in the conditions of CO concentration between 1 and 5 vol.% at a temperature and pressure of up to 500 °C and 0.6 MPa, respectively. High feed flow rates and a microchannel module configuration were applied in the flux measurements to ensure that the results are obtained with limited influence of concentration polarization adjacent to the membrane surface and hydrogen depletion along the microchannel length. While the CO inhibition effect was close to negligible at 500 °C, it was significant at lower temperatures. At a feed pressure of 0.2 MPa, the CO inhibition effect was only 0.2% at a CO concentration of 1 vol.% and the effect was 3.6% at a CO concentration of 5 vol.% at 500 °C. The CO inhibition effect were 3.4% for 1 vol.% CO and 14.1% for 5 vol.% CO at 400 °C. Measurements were also carried out at a high feed pressure of 0.6 MPa to evaluate the pressure dependence of the CO inhibition effect. The CO inhibition effect decreased to 0.7% at a CO feed concentration of 5 vol.% at 500 °C. Lower CO inhibition effect were also observed at 450 and 400 °C compared to the data obtained with the feed pressure of 0.2 MPa, while the inhibition levels were almost the same at 350 °C. Though the CO inhibition effect is larger at a lower feed pressure of 0.2 MPa, the effect was only 0.2% at 1 vol.% CO at 500 °C, which is close to the operating conditions of the MRF system. This study quantitatively revealed that the CO inhibition effect on hydrogen flux is extremely small when the membrane is operated at temperatures equal to or higher than 500 °C, even for state-of-the-art thin membranes. The performance of the Tokyo Gas MRF seems thus mainly limited by concentration polarization effects.     

MULTIRESPONSE OPTIMIZATION of ACID CASEIN PRODUCTION

A multivariate skimmilk extrusion process, designed to produce an acid coprecipitate was studied in terms of minimizing residual lactose, ash and fines. an experimental model system was utilized to simulate the extrusion process and evaluated using response surface methodology to assess the relationship between the responses (fines, residual lactose and minerals) and the process variables (concentration, pH, temperature, agitation, washing time and wash water ratio). Compromise optimum conditions were derived using the Generalized Distance Approach (GDA) and an Extended Response Surface Procedure (ERSP) which made use of the SAS RSREG procedure with and without constraints. the GDA procedure produced good results in terms of providing an optimum for a general acid casein process, while the ERSP allowed more extensive analysis of the data in terms of assessing specific processing conditions. Although more computing intensive, the ERSP conferred additional flexibility in determining optimal conditions for special situations such as extrusion processing. Both approaches are useful for process engineering, with the GDA being a more general tool while the ERSP is advantageous when the GDA procedure becomes limiting.     

Time to clinical stability in patients hospitalized with community-acquired pneumonia: implications for practice guidelines

CONTEXT: Many groups have developed guidelines to shorten hospital length of stay in pneumonia in order to decrease costs, but the length of time until a patient hospitalized with pneumonia becomes clinically stable has not been established. OBJECTIVE: To describe the time to resolution of abnormalities in vital signs, ability to eat, and mental status in patients with community-acquired pneumonia and assess clinical outcomes after achieving stability. DESIGN: Prospective, multicenter, observational cohort study. SETTING: Three university and 1 community teaching hospital in Boston, Mass, Pittsburgh, Pa, and Halifax, Nova Scotia. PATIENTS: Six hundred eighty-six adults hospitalized with community-acquired pneumonia. MAIN OUTCOME MEASURES: Time to resolution of vital signs, ability to eat, mental status, hospital length of stay, and admission to an intensive care, coronary care, or telemetry unit. RESULTS: The median time to stability was 2 days for heart rate (< or =100 beats/min) and systolic blood pressure (> or =90 mm Hg), and 3 days for respiratory rate (< or =24 breaths/min), oxygen saturation (> or =90%), and temperature (< or =37.2 degrees C [99 degrees F]). The median time to overall clinical stability was 3 days for the most lenient definition of stability and 7 days for the most conservative definition. Patients with more severe cases of pneumonia at presentation took longer to reach stability. Once stability was achieved, clinical deterioration requiring intensive care, coronary care, or telemetry monitoring occurred in 1% of cases or fewer. Between 65% to 86% of patients stayed in the hospital more than 1 day after reaching stability, and fewer than 29% to 46% were converted to oral antibiotics within 1 day of stability, depending on the definition of stability. CONCLUSIONS: Our estimates of time to stability in pneumonia and explicit criteria for defining stability can provide an evidence-based estimate of optimal length of stay, and outline a clinically sensible approach to improving the efficiency of inpatient management.