Differential alternating current chip calorimeter for in situ investigation of vapor-deposited thin films

Physical vapor deposition can be used to produce thin films with interesting material properties including extraordinarily stable organic glasses. We describe an ac chip calorimeter for in situ heat capacity measurements of as-deposited nanometer thin films of organic glass formers. The calorimetric system is based on a differential ac chip calorimeter which is placed in the vacuum chamber for physical vapor deposition. The sample is directly deposited onto one calorimetric chip sensor while the other sensor is protected against deposition. The device and the temperature calibration procedure are described. The latter makes use of the phase transitions of cyclopentane and the frequency dependence of the dynamic glass transition of toluene and ethylbenzene. Sample thickness determination is based on a finite element modeling of the sensor sample arrangement. In the modeling, a layer of toluene was added to the sample sensor and its thickness was varied in an iterative way until the model fit the experimental data.     

Thinness is not always fashionable

We discuss in this paper the cases of two patients with pure motor hemiparesis which were secondary to chronic subdural hematoma who evolved satisfactorily only with medical treatment. Of 1,000 consecutive patients with cerebro-vascular pathology admitted in our Neurology Department in the last 5 years, said two patients were the only ones (0.2%) in whom the lacunar syndrome "pure motor hemiparesis" was secondary to a chronic subdural hematoma. Such cases show that a subdural hematoma can manifest itself as a lacunar syndrome and that in selected cases the medical treatment of chronic subdural hematoma can yield goods results.     

Structural characterization of an N-acetyl-2-aminofluorene (AAF) modified DNA oligomer by NMR, energy minimization, and molecular dynamics

An N-acetyl-2-aminofluorene (AAF) modified deoxyoligonucleotide duplex, d(C1-C2-A3-C4-[AAF-G5]-C6-A7-C8-C9).d(G10-G11-T12-G13-C14-++ +G15-T16-G17-G18), was studied by one- and two-dimensional NMR spectroscopy. Eight of the nine complementary nucleotides form Watson-Crick base pairs, as shown by NOEs between the guanine imino proton and cytosine amino protons for G.C base pairs or by an NOE between the thymine imino proton and adenine H2 proton for A.T base pairs. The AAF-G5 and C14 bases show no evidence of complementary hydrogen bond formation to each other. The AAF-G5 base adopts a syn conformation, as indicated by NOEs between the G5 imino proton and the A3-H3' and A3-H2'/H2" protons and by NOEs between the fluorene-H1 proton of AAF and the G5-H1' or C6-H1' proton. The NOEs from the C4-H6 proton to C4 sugar protons are weak, and thus the glycosidic torsion angle in this nucleotide is not well defined by these NMR data. The remaining bases are in the anti conformation, as depicted by the relative magnitude of the H8/H6 to H2' NOEs when compared to the H8/H6 to H1' NOEs. The three base pairs on each end of the duplex exhibit NOEs characteristic of right-handed B-form DNA. Distance restraints obtained from NOESY data recorded at 32 degrees C using a 100-ms mixing time were used in conformational searches by molecular mechanics energy minimization studies. The final, unrestrained, minimum-energy conformation was then used as input for an unrestrained molecular dynamics simulation. Chemical exchange cross peaks are observed, and thus the AAF-9-mer exists in more than a single conformation on the NMR time scale. The NMR data, however, indicate the presence of a predominant conformation (> or = 70%). The structure of the predominant conformation of the AAF-9-mer shows stacking of the fluorene moiety on an adjacent base pair, exhibiting features of the base-displacement [Grunberger, D., Nelson, J. H., et al. (1970) Proc. Natl. Acad. Sci. U.S.A. 66, 488-494] and insertion-denaturation models [Fuchs, R.P.P., & Daune, M. (1971) FEBS Lett. 14, 206-208], while the distal ring of the fluorene moiety protrudes into the minor groove.     

An Apparatus for Generating Aged Cigarette Smoke for Controlled Human Exposure Studies

Research has shown that cigarette smoke changes chemically and physically after it is released into indoor air, that these changes can increase secondhand smoke (SHS) toxicity, and that acute exposures to even low levels of SHS increase the risk of cardiopulmonary disease. We designed a system to reproduce realistic SHS exposures in the laboratory for use in controlled human exposure studies. We generated cigarette smoke with a smoking machine, diluted it and conducted it through a 6 m³ stainless steel flow reactor at rates equivalent to the upper ranges of normal residential air exchange rates, to create aged cigarette smoke as a model for secondhand cigarette smoke. We observed that approximately 50% of the particle mass deposited within the system and that particle deposition percentage was higher when absorbent materials were placed within the system. The particle size ranges and deposition percentages, coefficients and velocities observed for this smoke aerosol are in good agreement with published values for SHS observed in residences and vehicles. This apparatus also permits the study of the physical and chemical interactions between SHS and indoor surfaces. The apparatus delivers stable aerosol concentrations to a human subject, which will permit accurate analysis of dose-response relationships in studies of the cardiovascular and respiratory effects of SHS exposure.

Copyright 2012 American Association for Aerosol Research     

Phase separation in polymer blend thin films studied by differential AC chip calorimetry

AC chip calorimetry is used to study the phase separation behavior of 100 nm thin poly(vinyl methyl ether)/poly(styrene) (PVME/PS) blend films. Using the on-chip heaters, very short (10 ms-10 s) temperature jumps into the temperature window of phase separation are applied, simulating laser heating induced patterning. These temperature pulses produce a measurable shift in the glass transition temperature, evidencing phase separation. The effect of pulse length and height on phase separation can be studied. The thus phase separated PVME/PS thin films remix rapidly, in contrast with measurements in bulk. AC chip calorimetry seems to be a more sensitive technique than atomic force microscopy to detect the early stages of phase separation in polymer blend thin films.     

Yearly rates of rod and cone functional loss in retinitis pigmentosa and cone-rod dystrophy

OBJECTIVE: To provide the first measures of the relative rates of rod and cone functional loss in patients with retinitis pigmentosa (RP) or cone-rod dystrophy (CRD). DESIGN: Five-year, prospective natural history study. PARTICIPANTS: Ninety-six patients (67 with RP and 29 with CRD) retaining measurable rod-mediated visual function and 5 normal subjects were tested at baseline and annually for 4 consecutive years. MAIN OUTCOME MEASURES: Tests of visual function included visual acuity, dark-adaptation thresholds, dark-adapted static perimetry, and rod and cone computer-averaged electroretinograms (ERGs), which were obtained over a range of retinal illuminances. Intervisit variability for each measure was obtained in a subset of patients who were tested twice within a 2-month interval and was used to determine whether an individual patient had shown progression, regression, or no change over a particular study interval. RESULTS: Over a 4-year interval, a significant number of patients with RP (60%) and CRD (62%) showed a decline in cone ERG amplitude. For rod ERG amplitude, the percentage of patients with RP or CRD showing progression was 64% and 45%, respectively. Although visual acuity, dark-adapted threshold, and rod visual field area also declined significantly over the 4-year period, the mean rate of change and the numbers of patients showing progression on these measures were lower than those for ERG measures. On specialized ERG testing, the yearly change in rod ERG threshold in RP was greater than the yearly change in cone ERG threshold, and the rate of progression varied significantly among inheritance types. For patients with CRD, the yearly change in rod threshold was comparable to the yearly change in cone ERG threshold. CONCLUSIONS: This study helps to define the natural progression of rod-mediated and cone-mediated functional loss in patients with RP and CRD.     

Lipoma and liposarcoma: evaluation using CT and MR imaging

The multi-subunit NADH-ubiquinone oxidoreductase (complex I) is the first enzyme complex in the electron transport chain of mitochondria. A small number of NADH-ubiquinone oxidoreductase subunits are the products of mitochondrial genes (subunits 1-7), while the remainder are nuclear encoded and imported from the cytoplasm. We have isolated and sequenced five subunits of the human complex I from a human heart lambda ZAP Express cDNA library. Comparison of the deduced amino acid sequences of the human subunits with the corresponding bovine sequences revealed greater than 80% amino acid identity. The high degree of similarity between human and bovine sequences suggests functional conservation of these subunits in the complex I. In silico Northern analysis revealed that two of the subunits were expressed ubiquitously while the remainder may have more restricted patterns of expression.     

A novel TP53 splicing mutation in a Li-Fraumeni syndrome family: a patient with Wilms'' tumour is not a mutation carrier

The authors describe the case of a patient with treatment-resistant schizophrenia who became pregnant after switching from conventional neuroleptic medications to clozapine, an atypical antipsychotic medication that does not cause hyperprolactinemia. Gestational diabetes, possibly exacerbated by clozapine, complicated management of her pregnancy. Comprehensive community support and psychiatric rehabilitation, combined with a positive response to clozapine, contributed to satisfying the patient's goal of having a healthy baby and being able to take the baby home to live with her and her husband.