Transport properties of helium near the liquid-vapor critical point. IV. The shear viscosity of3He and4He

Shear viscosity measurements with a precision of 0.05% are reported for³He and⁴He along near-critical isochores 0.85 c <1.12, where _c is the critical density. The temperature range was –10^–4<<1, where =(T – T _c)/T _c is the reduced temperature. The experiments were carried out with a torsional oscillator operating at 158 Hz, driven at resonance in a phase-locked loop. The absolute value of the viscosity was obtained by calibration at the superfluid transition of⁴He, based on published values and from direct calculations using the free decay time constant of the oscillations. The data are analyzed in terms of a model using the recent mode-coupling (MC) expressions by Olchowy and Sengers, and where account is taken of the earth's gravity effects. The theory could be fitted very well to the experiment with a single free parameter, the cutoff wave numberq _D, which was found to be 3.0×10⁶ and 7.0×10⁶ cm^–1 for³He and⁴He, respectively. We have used for the critical exponent the MC predicted value of z=0.054, which permits a fit superior to that using z=0.064 predicted by dynamic renormalization group (DRG) theories. Detailed comparisons are made between the model calculations and data for various isochores and isotherms and good agreement is obtained. The effects of gravity are described in some detail. The predicted frequency effect in viscosity measurements is calculated for³He and is shown to be obscured by gravity effects. Using the Olchowy-Sengers formulas, we have also fitted the MC theory to the critical thermal conductivity data of³He, again withq _D as the only free parameter. This fit gaveq _D=6 × 10⁷ cm^–1, which in the ideal situation should have been the same asq _D from viscosity. We also discuss a representation of the³He viscosity data along the critical isochore by a power law and first correction-to-scaling erm. Using the viscosity and the critical conductivity data for³He, we have calculated the dynamic amplitude ratio and obtained =1.05±0.10, in agreement with predictions from MC and DRG theories. Also, agrees with data of classical fluids. Finally, a comparison is made of recent shear viscosity data for CO₂ by Bruschi and Torzo with those on He. The CO₂ data are also analyzed in terms of the MC theory, and the discrepancies are discussed. In the Appendices, we present the results of new compressibility measurements on³He along the critical isochore, as used in the MC analysis. We also present a brief analysis of the fluid hydrodynamics in the torsional oscillator leading to relations for the viscosity as a function of the measured quantities. Finally, we give a short outline of the vertical density profile calculations from the earth's gravity field for the calculations of the viscosity nearT _c.     

从锌锗浸出液中提取锗的研究进展

锗资源开发对通讯和航空航天行业的发展具有重要的战略意义,由于提取锗的原料有限,所以开发和优化锗提取工艺受到日益关注.通过综述国内外从锌锗浸出液中提取锗的研究进展,对比多种锗的提取方法,总结出单宁沉锗法为应用最广泛的提锗方法.该方法具有绿色环保、操作简单的优点,但也存在单宁用量大,锗直收率低等问题亟待解决.基于超声波具有频率高、方向性好等优点,且已成功应用于湿法冶金工业中,因此进一步提出将超声外场引入单宁沉锗工艺中,并详细分析了超声外场强化的可行性和机理,以期降低单宁酸用量,提高锗直收率.指出超声外场强化单宁沉锗新工艺具有很好的研究和应用前景.     

多网融合方案在电力基建工程现场中应用研究

针对输变电工程陆续开展基建智慧工地,智慧物联系统平台建设已成为常态,目前建设思路主要是通过基于"大、云、物、移、智"开展新技术、新产品的应用,实现"人、机、料、法、环、测"等施工现场六要素的感知采集,以支撑智慧工地及基建信息化的业务开展.如何实现施工现场感知层数据、视频流数据以及业务数据三类数据的传输,并实现设备安装布设无线化、部署简易化,是重点思考和解决的方向,提出建设以5G(generation)专网为主,无线接入点(access point,AP)网络、远距离(long range,LoRa)通信网络为辅的多网融合方案,开展智慧工地网络层的建设,以支撑智慧工地物联网业务的开展,提供高质量、高体验的网络层支撑.     

高导热无溶剂绝缘漆的开发及性能研究

在环氧改性不饱和聚酯树脂中添加无机氧化物导热材料可提高绝缘漆的导热性能.研究了填料粒径、表面改性对绝缘漆沉降的影响,以及不同填料含量对绝缘漆导热系数、黏度的影响,在此研究基础上制备了高导热无溶剂绝缘漆并对其性能进行了表征.结果表明:对填料进行表面改性可以降低其沉降速度;当填料含量为40％时,绝缘漆的黏度为72 s,导热系数达到0.46 W/(m·K),40℃下静置6天无沉降,具有很好的实际应用价值.     

应力预养护对硫铝酸盐注浆材料强度与微结构的影响

在煤矿千米深井巷道注浆加固示范工程中,注浆结石体抗压强度常高于常压下的抗压强度,针对此问题,采用自制加压装置模拟应力作用对注浆材料浆液进行加压预养护,通过测试试样强度、表观密度、孔隙率、水化产物种类和微观结构,分析应力对材料强度增强的作用机理.结果表明:10 MPa的应力可以显著提高注浆材料结石体的抗折、抗压强度,抗折强度最大增加24.3％,抗压强度最大提高21.6％;应力可促进早期钙矾石的生成且不改变水化产物种类,提高结石体密度.分析认为,应力通过促进钙矾石的生成速率,降低结石体孔隙率和最可几孔径的方式提高结石体的强度,即提高结石体的密度,增加钙矾石相互搭接的紧密程度,进而提高注浆材料结石体的抗折、抗压强度.检测结石体密度在某种意义上可以评估注浆加固的加固效果.     

基于图形化编程语言LabVIEW的虚拟仪器开发

本文介绍了虚拟仪器的概念，组成特征和图形化编程语言LabVIEW，并用LabVIEW开发了位移测试和系统静态精度测试系统。     

中国化石能源生产的生命周期清单(Ⅰ)--能源消耗与直接排放

化石能源生产的生命周期清单不仅是开展化工产业及其产品生命周期分析的基础,也能阐明化石能源生产的基本环境行为.通过计算得到了2002年我国原煤、原油和天然气开采过程中直接相关的能源消耗和污染物排放,涉及到的污染物排放包括液态污染物、固体废弃物和CO2、SO2、NOx、CO、CH4、烟尘等气态排放物.     

飞行器电磁窗耐雨蚀复合涂层的制备

研制了电磁窗用耐雨蚀底漆和耐雨蚀面漆，介绍了该配套涂料体系的制备工艺，并列举了其性能指标。讨论了耐雨蚀面漆中聚酯树脂、多元醇和颜料对其性能的影响，施工工艺对耐雨蚀涂层与底涂层之间配套性能的影响。