Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Model Selection in Applied Science and Engineering: A Decision-Theoretic Approach

Mathematical models are developed and used to study the properties of complex systems in just about every area of applied science and engineering. Information on the system being modeled is, in general, incomplete, so that there may be two or more models consistent with the available information. The collection of these models is called the class of candidate models. A decision-theoretic method is developed for selecting the optimal member from the collection. The optimal model depends on the available information, the class of candidate models, and the model use. The candidate models may be deterministic or random. Classical methods for model selection, including the method of maximum likelihood and Bayesian methods, are briefly reviewed. These methods ignore model use and require data to be available. In addition, examples are used to show that classical methods for model selection can be unreliable in the sense that they can deliver unsatisfactory models when data is limited. The proposed decision-theoretic method for model selection does not have these limitations. The method accounts for model use via a utility function. This feature is especially important when modeling high-risk systems where the consequences of using an inappropriate model for the system can be disastrous.     

A new method for seed oil body purification and examination of oil body integrity following germination

Plant seeds store triacylglycerols as energy sources for germination and postgerminative growth of seedlings. The triacylglycerols are preserved in small, discrete, intracellular organelles called oil bodies. A new method was developed to purify seed oil bodies. The method included extraction, flotation by centrifugation, detergent washing, ionic elution, treatment with a chaotropic agent, and integrity testing by use of hexane. These processes subsequently removed non-specifically associated or trapped proteins within the oil bodies. Oil bodies purified by this method maintained their integrity and displayed electrostatic repulsion and steric hindrance on their surface. Compared with the previous procedure, this method allowed higher purification of oil bodies, as demonstrated by SDS-PAGE using five species of oilseeds. Oil bodies purified from sesame were further analyzed by two-dimensional gel electrophoresis and revealed two potential oleosin isoforms. The integrity of oil bodies in germinating sesame seedlings was examined by hexane extraction. Our results indicated that consumption of triacylglycerols reduced gradually the total amount of oil bodies in seedlings, whereas no alteration was observed in the integrity of remaining oil bodies. This observation implies that oil bodies in germinating seeds are not degraded simultaneously. It is suggested that glyoxisomes, with the assistance of mitochondria, fuse and digest oil bodies one at a time, while the remaining oil bodies are preserved intact during the whole period of germination.     

Current issues in nerve repair

Although accepted surgical techniques for peripheral nerve repair remain largely unchanged over the past three decades, much progress has been made toward understanding the mechanisms involved in nerve regeneration, and consequently toward providing adjunctive measures to enhance this regenerative process. We present a comprehensive review of the significant advances made in several aspects of nerve repair over the past decade, and particularly the past few years, and provide a few examples of facial nerve repair using the standard neurorrhaphy techniques recommended today. Several conclusions were drawn after thorough review of the literature. Early repair of injured nerves is preferred, and there appears to be no benefit to waiting for 3 weeks. Severed nerves should be repaired with monofilament 9-0 nylon suture placed in epineurial fashion. Fibrin glue confers no benefit in reattaching injured nerves. Likewise, theoretical advantages of laser neurorrhaphy have not resulted in improved nerve regeneration. Finally, trophic factors, such as apolipoproteins and nerve growth factor, and tubulization both appear to offer promise for future experimental and clinical progress in nerve repair. However, further work must be done to prove their efficacy.     

ELISA detection of IL-1 beta in human sera needs independent confirmation. False positives in hospitalized patients

Electrical field stimulation evoked a reproducible outflow of calcitonin gene-related peptide-like immunoreactivity (CGRP-LI) from the dorsal half of the rat spinal cord, an effect which was abolished by prior application of capsaicin, tetrodotoxin or removal of extracellular Ca2+. Adenosine (EC50 3.2 microM) and the selective adenosine A1 receptor agonist N6-cyclohexyladenosine (EC50 8.2 nM) inhibited evoked CGRP-LI outflow, while the selective adenosine A2 receptor agonist CGS-21680 was ineffective up to 10 microM. The action of adenosine was prevented by the adenosine A1 receptor selective antagonist 8-cyclopentyl-1,3-dipropylxanthine (30 microM), which did not affect CGRP-LI release on its own.