Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Enabling On-Demand Conformal Zn-Ion Batteries on Non-Developable Surfaces

Conventional power sources encounter difficulties in achieving structural unitization with complex-shaped electronic devices because of their fixed form factors. Here, it is realized that an on-demand conformal Zn-ion battery (ZIB) on non-developable surfaces uses direct ink writing (DIW)-based nonplanar 3D printing. First, ZIB component (manganese oxide-based cathode, Zn powder-based anode, and UV-curable gel composite electrolyte) inks are designed to regulate their colloidal interactions to fulfill the rheological requirements of nonplanar 3D printing, and establish bi-percolating ion/electron conduction pathways, thereby enabling geometrical synchronization with non-developable surfaces, and ensuring reliable electrochemical performance. The ZIB component inks are conformally printed on arbitrary curvilinear substrates to produce embodied ZIBs that can be seamlessly integrated with complicated 3D objects (including human ears). The conformal ZIB exhibits a high fill factor (i.e., areal coverage of cells on underlying substrates, ≈100%) that ensures high volumetric energy density (50.5 mWh cm_cell⁻³), which exceeds those of previously-reported shape-adaptable power sources.     

Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-l-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78 % in BMS vs. 51.5 ± 12.20 % in AES vs. 34.7 ± 7.23 % in SES vs. 28.7 ± 7.30 % in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0–1.0) in BMS vs. 1.0 (range 1.0–1.0) in AES vs. 2.0 (range 2.0–2.0) in SES vs. 2.0 (range 2.0–2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88 % in BMS vs. 50.4 ± 14.87 % in AES vs. 34.5 ± 7.22 % in SES vs. 28.9 ± 7.22 % in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.     

The role of protein kinase in C ischemic/reperfused preconditioned isolated rat hearts

Protein kinase C (PKC) has been implicated in the preconditioning-induced cardiac protection in ischemic/reperfused myocardium. We studied the effect of PKC inhibition with calphostin C (25, 50, 100, 200, 400, and 800 nM), a potent and specific inhibitor of PKC, in isolated working nonpreconditioned and preconditioned ischemic/reperfused hearts. In the nonpreconditioned groups, all hearts underwent 30 min of normothermic global ischemia followed by 30 min of reperfusion. In the preconditioned groups, hearts were subjected to four cycles of ischemic preconditioning by using 5 min of ischemia followed by 10 min reperfusion, before the induction of 30 min ischemia and reperfusion. At low concentrations of calphostin C (25, 50, and 100 nM), the PKC inhibitor had no effect on the incidence or arrhythmias or postischemic cardiac function in the nonpreconditioned ischemic/reperfused groups. With 200 and 400 nM of calphostin C, a significant increase in postischemic function and a reduction in the incidence of arrhythmias were observed in the nonpreconditioned ischemic/reperfused groups. Increasing the concentration of calphostin C to 800 NM, the recovery of postischemic cardiac function was similar to that of the drug-free control group. In preconditioned hearts, lower concentrations (< 100 nM) of calphostin C did not change the response of the myocardium to ischemia and reperfusion in comparison to the preconditioned drug-free myocardium. Two hundred and 400 nM of the PKC inhibitor further reduced the incidence of ventricular fibrillation (VF) from the preconditioned drug-free value of 50% to 0 (p < 0.05) and 0 (p < 0.05), respectively, indicating that the combination of the two, preconditioning and calphostin C, affords significant additional protection. Increasing the concentration of calphostin C to 800 nM blocked the cardioprotective effect of preconditioning (100% incidence of VF). The recovery of cardiac function was similarly improved at calphostin C doses of 200 and 400 nM and was reduced at 800 nM (p < 0.05). With 200 and 400 nM of calphostin C, both cytosolic and particulate PKC activity were reduced by approximately 40 and 60%, respectively, in both preconditioned and preconditioned/ischemic/reperfused hearts. The highest concentration of calphostin C (800 nM) resulted in almost a complete inhibition of cytosolic (100%) and particulate (85%) PKC activity correlated with the abolition of preconditioning-induced cardiac protection. In conclusion, calphostin C protects the ischemic myocardium obtained from intact animals, provides significant additional protection to preconditioning at moderate doses, and blocks the protective effect of preconditioning at high concentrations. The dual effects of calphostin C appear to be strictly dose and "enzyme inhibition" related.     

A new vertical‐alignment LC mode with high‐transmittance and fast‐response‐time features

Abstract— A novel pixel design for vertical‐alignment LCDs with superior transmittance has been developed. The new liquid‐crystal mode, refered to as the hole‐induced vertical‐alignment mode (Hi‐VA), uses a via hole of an organic layer on a TFT substrate to achieve multi‐domain alignment. Compared to the conventional design, the Hi‐VA mode has a transmittance of up to 135% with a contrast ratio of 2000:1. Moreover, the new structure is free from ITO patterning or protrusion on the color‐filter side, which makes the fabrication process simple and low cost.     

A dual‐polarized cylindrical conformal array antenna suitable for unmanned aerial vehicles

A dual‐polarized X‐band conformal array antenna is presented for unmanned aerial vehicles with polarimetric radars/sensors. Starting from the planar structure, the array antenna consisted of sixteen 2 × 2 subarrays is conformal to the cylinders with various curvature radii to fit the payload box of the airborne vehicle. The return losses are almost constant even if the curvature radius changes. Measured radiation patterns are compared with various curvatures at the same frequencies. The array can be easily placed on the aircraft payload or fuselage due to its ultra thin thickness, ultra lightweight, and conformal structure, which has potential airborne applications in polarimetric radar surveillance, remote sensing, and wireless communications. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Two versions of architectures for dynamic implied addressing mode

The complexity of today’s embedded applications increases with various requirements such as execution time, code size or power consumption. To satisfy these requirements for performance, efficient instruction set design is one of the important issues because an instruction customized for specific applications can make better performance than multiple instructions in aspect of fast execution time, decrease of code size, and low power consumption. Limited encoding space, however, does not allow adding application specific and complex instructions freely to the instruction set architecture. To resolve this problem, conventional architectures increases free space for encoding by trimming excessive bits required beyond the fixed word length. This approach however shows severe weakness in terms of the complexity of compiler, code size and execution time. In this paper, we propose a new instruction encoding scheme based on the dynamic implied addressing mode (DIAM) to resolve limited encoding space and side-effect by trimming. We report our two versions of architectures to support our DIAM-based approach. In the first version, we use a special on-chip memory to store extra encoding information. In the second version, we replace the memory by a small on-chip buffer along with a special instruction. We also suggest a code generation algorithm to fully utilize DIAM. In our experiment, the architecture augmented with DIAM shows about 8% code size reduction and 18% speed up on average, as compared to the basic architecture without DIAM.     

Pattern recognition using feature feedback: Application to face recognition

In this paper, we propose a new pattern recognition method using feature feedback and present its application to face recognition. Conventional pattern recognition methods extract the features employed for classification using PCA, LDA and so on. On the other hand, in the proposed method, the extracted features are analyzed in the original space using feature feedback. Using reverse mapping from the extracted features to the original space, we can identify the important part of the original data that affects the classification. In this way, we can modify the data to obtain a higher classification rate, make it more compact or abbreviate the required sensors. To verify the applicability of the proposed method, we apply it to face recognition using the Yale Face Database. Each face image is divided into two parts, the important part and unimportant part, using feature feedback, and the classification performed using the feature mask obtained from feature feedback. Also, we combine face recognition with image compression. The experimental results show that the proposed method works well.