Lung function measurement in general practice: a comparison of the Escort spirometer with the Micromed turbine spirometer and the mini-Wright peak flow meter

It is important that new types of spirometer for widespread clinical use are pragmatically evaluated in primary care. This study compared measurements taken by a new portable Fleisch pneumotachograph spirometer (known as the Escort) with those of the commonly used mini-Wright peak flow meter and the Micromed Pocket turbine spirometer. A pragmatic study was conducted in two phases during routine surgeries at Aldermoor Health Centre, Southampton. Phase I compared the new spirometer with the mini-Wright peak flow meter and Phase 2 compared the new spirometer and the turbine spirometer. One hundred patients aged 5-88 years (56 patients with a history of chronic respiratory complaints and 44 patients without) entered Phase 1, and 100 patients aged 6-82 years (62 patients with a history of chronic respiratory complaints and 38 patients without) entered Phase 2. Each patient contributed only once to each phase, but some entered both phases on separate occasions. Ninety-five percent limits of agreement (mean +/- SD) were wide for all comparisons. Graphical plots revealed trends towards higher Escort values as mean values rose compared with both mini-Wright and turbine readings for peak expiratory flow rate and forced expiratory volume in one second. Possible over-reading of peak expiratory flow rate with the mini-Wright meter at low mean values was also seen. Readings taken with these different types of meter cannot be interchanged with confidence in clinical practice. The clinical significance of the theoretically more accurate measures of lung function produced with the new meter, and indeed of spirometry itself, needs further investigation.     

An X-ray photoelectron spectroscopic investigation into the chemical structure of deposits formed from hexamethyldisiloxane/ oxygen plasmas

The effect of oxygen addition to microwave-sustained plasmas of hexamethyldisiloxane (HMDSO) has been investigated. Attention was directed to the solid products formed on aluminium substrates (plasma deposits). To enable a quantitative analysis of these, X-ray photoelectron spectroscopy (XPS) of standard silicon-containing materials was carried out. When suitable charge correction is applied to the XP spectra of HMDSO/O₂ plasma deposits, a number of very clear trends emerge. From changes in elemental composition, core line binding energies (Si2p, C 1s, and O 1s) and widths, we show how oxygen addition to the plasma affects the chemical nature of the plasma deposit. The data reported also provide (some limited) information on the reactions taking place in the plasma.     

Effect of titanium substitution on the structure and properties of Fe3Al-based intermetallic alloys

Substitutions (0–16 at%) of titanium for iron in Fe₃Al-based alloys rapidly solidified by chill-block melt-spinning stabilize the D0₃ and B2 ordered structures. Rapid solidification results in total suppression of D0₃ order in binary alloys, whereas alloys containing titanium have D0₃ structure. D0₃ and B2 antiphase domain size, lattice parameter and hardness increase with increasing titanium content of the alloy. The deformation mode changes from single (unit) bcc dislocation in binary alloys to two-fold superdislocation configuration in D0₃Fe₃Al-Ti alloys. Mechanical antiphase boundaries are generated by the movement of these imperfect configurations. All the alloys exhibited cleavage tensile failure. The mechanical properties are correlated with the observed structural changes.     

Tetradecylthioacetic acid incorporated into very low density lipoprotein: changes in the fatty acid composition and reduced plasma lipids in cholesterol-fed hamsters

The mechanism behind the hypolipidemic effect of tetradecylthioacetic acid (CMTTD, a non-beta-oxidizable 3-thia fatty acid) was studied in hamsters fed a high cholesterol diet (2%), which resulted in hyperlipidemia. Treating hyperlipidemic hamsters with CMTTD resulted in a progressive hypocholesterolemic and hypotriacylglycerolemic effect. Decreased plasma cholesterol was followed by a 39% and 30% reduction in VLDL-cholesterol and LDL-cholesterol, respectively. In contrast, the HDL-cholesterol content was not affected, thus decreasing the VLDL-cholesterol/HDL-cholesterol and LDL-cholesterol/HDL-cholesterol ratios. 3-Hydroxy-3-methylglutaryl- (HMG) CoA reductase activity and its mRNA level were unchanged after CMTTD administration. Also, the LDL receptor and LDL receptor-related protein (LRP-4) mRNAs were unchanged. The decrease in plasma triacylglycerol was accompanied by a 45% and 56% reduction in VLDL-triacylglycerol and LDL-triacylglycerol, respectively. The hypolipidemic effect of CMTTD was followed by a 1.4-fold increase in mitochondrial fatty acid oxidation and a 2.3-fold increase in peroxisomal fatty acid oxidation. CMTTD treatment led to an accumulation of dihomo-gamma-linolenic acid (20:3n-6) in liver, plasma, very low density lipoprotein, and heart. Noteworthy, CMTTD accumulated more in the heart, plasma, and VLDL particles compared to the liver, and in the VLDL particle alpha-linolenic acid (18:3n-3) decreased whereas eicosatetraenoic acid (20:4n-3) increased. In addition, linoleic acid (18:2n-6) and the total amount of polyunsaturated fatty acids decreased, the latter mainly due to a decrease in n-6 fatty acids. The present data show that CMTTD was detected in plasma and incorporated into VLDL, liver, and heart. The relative incorporation (mol%) of CMTTD was heart > VLDL > liver. In conclusion, CMTTD causes both a hypocholesterolemic and hypotriacylglycerolemic effect in hyperlipidemic hamsters.     

Evaluation of a commercial process for collection and cooling of beef offals by a temperature function integration technique.

The hygienic adequacy of a commercial process for the collection and cooling of beef offals was assessed by a temperature function integration technique. The diverse operations for collection of offals were inspected. The rates of product movement through those operations, and the temperatures of products at the time of their being packed, were determined. From that information, four of the nine product types were selected for examination of their temperature histories during the assembly and cooling of the cartoned products. The products selected encompassed product at near-body and near-air-ambient temperatures at the time of packaging, product in the largest and smallest cartons used in the process, and product with relatively short and long residence times in an unchilled carton stack assembly area. Twenty-one temperature histories were collected for each of the products, and the possible proliferation of an indicator organism, Escherichia coli, calculated for each temperature history. The results were assessed against a temperature function integration criterion derived from studies of beef carcass and cartoned meat cooling processes. Products packaged at near-ambient temperature readily met with the criterion, but products packed at near-body temperatures did not comply. The latter non-compliance was extreme for product packaged in large cartons. However, the principal cause of non-compliance was identified as highly variable cooling conditions in the carton freezing facility. A brief survey of air speeds and temperatures within that facility indicated means by which product cooling could be better controlled.     

Antimicrobial activity and spectrum of LB20304, a novel fluoronaphthyridone

Compound LB20304 is a fluoronaphthyridone carboxylic acid with a novel pyrrolidine substituent. This drug was compared with ciprofloxacin, levofloxacin, ofloxacin, and trovafloxacin against over 800 pathogens, most from blood stream infections, by National Committee for Clinical Laboratory Standards reference methods. LB20304 was the most active agent against gram-positive species including strains observed to be resistant to other fluoroquinolones and glycopeptides. The potency of LB20304 (MIC50, 0.03 micrograms/ml) against the Enterobacteriaceae was exceeded only by that of ciprofloxacin (0.015 micrograms/ml). It has limited activity against gram-negative anaerobes.     

SED88: a Pascal program for the analysis of sedimentation equilibrium data

Analytical ultracentrifugation is commonly used for the determination of molecular weights (sedimentation equilibrium) and sedimentation coefficients (sedimentation rate) of biological macromolecules in solution. A Turbo Pascal program for the analysis of sedimentation equilibrium centrifugation data produced by absorbance optical systems is described. The user may enter data from a scan of absorbance versus distance from the centre of rotation, via a graphics tablet (or ASCII file). This is subsequently manipulated to yield an apparent weight average molecular weight for the given sample. Plots of ln (absorbance) versus (radius2) may also be produced. The method described uses readily available computational equipment requiring only a graphics tablet in addition to an IBM PC compatible computer. This technique and the software developed have been used to investigate the molecular weight range of two International Humic Substances Society (IHSS) reference samples from the Suwannee River.     

Mechanical properties of poly(ether-ether-ketone) for engineering applications

An outline of the characteristics of PEEK and the versatility of its compositional forms (micro and macro composites) are given to illustrate its wide potential for success in engineering applications. Although it is necessary to have particular tabulations of mechanical properties for engineering design, these are seldom available and consequently it is argued that an understanding of stiffness, toughness and strength properties are required to fully exploit available manufacturer's data and thus develop the full potential of PEEK and its composites. Stiffness characteristics are considered in terms of a modulus function which is dependent on time under load and temperature. In its composite forms, whether reinforced with short or continuous fibres, stiffness anistropy can be both considerable and complex, but some empirical ground-rules are apparent. For continuous fibre composites even in the form of complex lay-ups, it is also possible to attempt some stiffness prediction from certain pseudo-elastic constants. Toughness of PEEK and its composites is described in terms of both comparative and intrinsic properties. Instrumented falling weight impact data, particularly as a function of temperature enable some insight into ductile-brittle transitions for the unreinforced material, but crack initiation and crack propagation processes for the various fibre reinforced forms. Intrinsic toughness is described in terms of linear elastic fracture mechanics theory. Strength properties are described for static and dynamic loading configurations. In particular, PEEK and its composites are evaluated for increasing test severities for strength characteristics; stress concentration, loading form and test temperature are considered.     

An X-ray study of particulate solids flow in a cylindrical bunker

The noise generated by a ball mill during a batch grinding operation is investigated and the results show that, for a given ore, the noise levels may vary with time of grind, ore charge weight and mill speed. The role of the ore in absorbing noise energy is suggested as a possible control variable for the grinding process and as an indicator of product size distribution. The relationship between ore types and mill noise is also examined and, under conditions of wet grinding, it is demonstrated that mill noise analysis can indicate ore type and may have a possible use as a grindability-type parameter.