RADIOACTIVE OR NATURAL TRACER。TECHNIQUES FOR LEAK DETERMINING OF DAM ABUTMENT

Infiltration and localization of preferential infiltration zones at the dam abutment are measured using radioactive tracer tests of flow in boreholes,meanwhile interconnection between boreholes and the energing water points is analysed.The theory and practice of radioactive tracer synthetic detective method are described to give methods and calculation formulae used under the condition of stable flow in single well to measure permeability coefficient and hydrostatic heads.Major single hole techniques including measurement for seepage line,velocity,rate of seepage flow and relationship of recharge of groundwater in aquifers are introduced briefly.The possibilities offered by natureal tracers are analysed,uincluding electric-conduct,pH-value and temperature of water as well as stable isotopes(D,^18O) and tritium.Furthermore,the sensibilities of this theory and methods were confirmed by detecting seepage flow field of Xinanjiang Dam.     

A conditional classification recurrent RBM for improved series mid-term forecasting

In the context of human-robot and robot-robot interactions, the better cooperation can be achieved by predicting the other party’s subsequent actions based on the current action of the other party. The time duration for adjustment is not sufficient provided by short term forecasting models to robots. A longer duration can by achieved by mid-term forecasting. But the mid-term forecasting models introduce the previous errors into the follow-up forecasting and amplified gradually, eventually invalidating the forecasting. A new mid-term forecasting with error suppression based on restricted Boltzmann machine(RBM) is proposed in this paper. The proposed model can suppress the error amplification by replacing the previous inputs with their features, which are retrieved by a deep belief network(DBN). Furthermore, a new mechanism is proposed to decide whether the forecasting result is accepted or not. The model is evaluated with several datasets. The reported experiments demonstrate the superior performance of the proposed model compared to the state-of-the-art approaches.

     

Intrinsically patterned electrical systems: physical requirements and experimental demonstration

Microsystem Technologies - This paper introduces a method of replicating electrical circuits through a series of specific requirements as part of a design methodology referred to as Intrinsically...     

涡流检测技术在宝钢热轧轧辊上的应用

介绍了轧辊涡流检测仪的工作要求、设备组成和使用方法,指出对轧辊进行涡流检测可防止爆辊,减少轧辊磨削量。     

浅谈化工建设项目竣工预验收程序和内容

结合作者的实际工作 ,总结了对工程建设实施“三道质量控制工序”的经验 ,强调了过程质量控制的重要性 ,较为系统地介绍了化工建设项目预验收工作的程序和内容     

压缩天然气(CNG)加气站工艺技术及方案选择

介绍了压缩天然气（CNG）加气站工艺技术，并着重分析了脱水、压缩、储气和安全等重点工序，还分别介绍了CNG加气子母站和CNG加气标准站平面布置图。在此基础上，根据不同CNG站的技术要求和本地区实际情况，选择CNG站建设方案。     

碳酸钙填充塑料成本分析

碳酸钙粉体经过活化、造粒处理填充到聚乙烯薄膜,可使填充制品成本降低。随着填料的增加,其加工性能逐渐变差,单位质量塑料产品体积减小。经测算,使用填充剂后成本的降低足以弥补因体积减小产生的损失。对于薄膜制品而言,填充量小于10%效益增加不明显;超过30%,则不容易稳定成膜,影响成品质量。     

金属阳极四元涂层开发现状浅析

通过分析金属阳极涂层结构，在现有金属阳极三元涂层的基础上，确定了钌、钛、铱、锡四元涂层。对该涂层的电化性能指标及实际运行数据进行了分析，并与三元涂层电化性能指标进行对比，说明了四元涂层在析氯电位、极化率、析氧电位、寿命等方面均明显优于三元涂层，而且更适合在高电流密度下运行。     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.