Finite data performance analysis of MVDR beamformer with andwithout spatial smoothing

The finite-data performance of a minimum-variance distortionless response (MVDR) beamformer is analyzed with and without spatial smoothing, using first-order perturbation theory. In particular, expressions are developed for the mean values of the power gain in any direction of interest, the output power, and the norm of the weight-error vector, as a function of the number of snapshots and the number of smoothing steps. It is shown that, in general, the smoothing, in addition to decorrelating the sources, can alleviate the effects of finite-data perturbations. The above expressions are reduced to the case in which no spatial smoothing is used. These expressions are valid for an arbitrary array and for arbitrarily correlated signals. For this case, an expression for the variance of the power gain is also developed. For a single interference case it is shown explicitly how the SNR, spacing of the interference from the desired signal and the correlation between them influence the beamformer performance. Simulations verify the usefulness of the theoretical expressions     

Progress in the Molecular Beam Epitaxy of HgCdTe on Large-Area Si and CdZnTe Substrates

This paper presents the progress in the molecular beam epitaxy (MBE) growth of HgCdTe on large-area Si and CdZnTe substrates at Raytheon Vision Systems. We report a very high-quality HgCdTe growth, for the first time, on an 8 cm × 8 cm CdZnTe substrate. This paper also describes the excellent HgCdTe growth repeatability on multiple 7 cm × 7 cm CdZnTe substrates. In order to study the percentage wafer area yield and its consistency from run to run, small lots of dual-band long-wave infrared/long-wave infrared triple-layer heterojunction (TLHJ) layers on 5 cm × 5 cm CdZnTe substrates and single-color double-layer heterojunction (DLHJ) layers on 6-inch Si substrates were grown and tested for cutoff wavelength uniformity and micro- and macrovoid defect density and uniformity. The results show that the entire lot of 12 DLHJ-HgCdTe layers on 6-inch Si wafers meet the testing criterion of cutoff wavelength within the range 4.76 ± 0.1 μm at 130 K and micro- and macrovoid defect density of ≤50 cm⁻² and 5 cm⁻², respectively. Likewise, five out of six dual-band TLHJ-HgCdTe layers on 5 cm × 5 cm CdZnTe substrates meet the testing criterion of cutoff wavelength within the range 6.3 ± 0.1 μm at 300 K and micro- and macrovoid defect density of ≤2000 cm⁻² and 500 cm⁻², respectively, on the entire wafer area. Overall we have found that scaling our HgCdTe MBE process to a 10-inch MBE system has provided significant benefits in terms of both wafer uniformity and quality.     

AlAs/GaAs Schottky-collector resonant-tunnel-diodes

The Schottky-collector resonant-tunnel-diode (SRTD) is an resonant-tunnel-diode with the normal N⁺ collector layer and ohmic contact replaced by direct Schottky contact to the space-charge layer, thereby eliminating the associated parasitic series resistance Rins. By scaling the Schottky collector contact to submicron dimensions, the device periphery-to-area ratio is increased, decreasing the periphery-dependent components of the parasitic resistance, and substantially increasing the device's maximum frequency of oscillation. We report measured d.c. and microwave parameters of planar SRTDs fabricated with 1 μm-geometries in AlAs/GaAs.     

Synthesis and electrochemical studies of the 4 V cathode, Li(Ni2/3Mn1/3)O2

Layered Li(Ni_2/3Mn_1/3)O₂ compounds are prepared by freeze-drying, mixed carbonate and molten salt methods at high temperature. The phases are characterized by X-ray diffraction, Rietveld refinement, and other methods. Electrochemical properties are studied versus Li-metal by charge–discharge cycling and cyclic voltammetry (CV). The compound prepared by the carbonate route shows a stable capacity of 145 (±3) mAh g⁻¹ up to 100 cycles in the range 2.5–4.3 V at 22 mA g⁻¹. In the range 2.5–4.4 V at 22 mA g⁻¹, the compound prepared by molten salt method has a stable capacity of 135 (±3) mAh g⁻¹ up to 50 cycles and retains 96% of this value after 100 cycles. Capacity-fading is observed in all the compounds when cycled in the range 2.5–4.5 V. All the compounds display a clear redox process at 3.65–4.0 V that corresponds to the Ni^2+/3+–Ni^3+/4+ couple.     

Conjugate natural convection heat transfer in an inclined square cavity containing a conducting block

The present work is concerned with computation of natural convection flow in a square enclosure with a centered internal conducting square block both of which are given an inclination angle. Finite volume method through the concepts of staggered grid and SIMPLE algorithm have been applied. Deferred QUICK scheme has been used to discretize the convective fluxes and central difference for diffusive fluxes. The problem of conjugate natural convection has been taken up for validating the code. The abrupt variation in the properties at the solid/fluid interface are taken care of with the harmonic mean formulation. Solution has been performed in the computational domain as a whole with proper treatment at the solid/fluid interface. Computations have been performed for Ra = 10³–10⁶, angle of inclination varying from 15° to 90° in steps of 15° and ratio of solid to fluid thermal conductivities of 0.2 and 5.0. Results are presented in terms of streamlines, isotherms, local and average Nusselt number.     

Experimental Measurement of Impact Pressures Delivered by Oral Water Irrigation Devices

Water irrigation devices (WID's) are widely used in homes and dental clinics across the country for oral hygiene. There have been several reported cases of tissue damage with the use of these devices. In the present investigation, two commercially available oral water irrigation devices were evaluated using engineering techniques. The impact thrusts delivered by these devices were measured at different control settings. Both of the tested commercial oral water irrigation devices were found to exert abnormally high thrust which could cause serious damage to the sulcular epithelium and the underlying tissues. These pressures are far in excess of the pressure intensity necessary to perform the cleaning action. Moreover, the existing designs using reciprocating pumps are unsafe and are potentially dangerous, particularly with small diameter tips.     

Endogenous oncornaviral DNA sequences: evidence for two classes of viral DNA sequences in guinea pig cells

The nature of the endogenous viral DNA sequences in guinea pig cells was studied by hybridization. A segment of the viral RNA (r-VRNA) hybridizing to abundant (or reiterated) DNA sequences (R-VDNA) was isolated by recycling to a Cot of 300. The hybridization of the recycled VRNA, as well as the total VRNA, was followed by determining their kinetics and by Wetmur-Davidson analysis. The kinetics of hybridization of total VRNA were complex, did not follow a second-order kinetics, and revealed two slopes by Wetmur-Davidson analysis. The recycled RNA, on the other hand, had a second-order reaction rate expected of the hybridization between a single species of RNA and DNA sequences and yielded a single straight line in a Wetmur-Davidson plot. The Cot1/2 and slope of the recycled r-VRNA was almost identical to that of the abundant VDNA sequences obtained from the hybridization data of the total VRNA. Guinea pig 28S rRNA with or without recycling was used in monitoring hybridization rate. The kinetics of hybridization of 28S RNA followed a second-order reaction and produced a single straight line by Wetmur-Davidson plot, with a second-order reassociation rate constant of 9.6 x 10(-3) liters/mol-s, a Cot1/2 of 104 mol-s/liter, and reiteration frequency of 146. There was no difference in the kinetics of hybridization of 28S RNA before and after recycling. These experiments showed that guinea pig cells contain two classes of VDNA sequences. (i) R-VDNA sequences with a second-order reassociation rate constant of 8.2 x 10(-4) liters/mol-s, a Cot1/2 of 1,219 mol-s/liter, and a reiteration frequency of 12 represent 37.5% of the viral genome. (ii) Unique VDNA sequences with a second-order reassociation rate constant of 1.2 x 10(-4) liters/mol-s, a Cot1/2 of 7,692 mol-s/liter, and a reiteration frequency of 2 represent 62.5% of the viral genome.     

Isolation, physicochemical properties, and the macromolecular composition of the vitelline and fertilization envelopes from Xenopus laevis eggs

As a step toward defining in molecular terms the sperm-triggered block to polyspermy reaction established by the egg at fertilization, vitelline (VE) and fertilization (FE) envelopes were isolated from eggs of the Sounth African clawed toad Xenopus laevis and some of their physicochemical properties determined. Envelopes were isolated after lysis of the fertilized or unfertilized eggs by sieving techniques; isolated envelopes retained their in situ morphology as determined by electron microscopy. The isolated envelopes had different solubility properties and, in general, VE was more readily dissolved by aqueous solvents than FE, although both could be completely dissolved by detergents or chaotropic agents. Changes in envelope solubility correlated with the progression of the cortical reaction implicating a role for cortical granule material in modifying the solubility properties of the envelope. The VE and FE were composed of protein and carbohydrate with no lipid components detected. As determined by immunodiffusion experiments, the FE contained the same antigens as the VE plus components derived from the cortical granules and the innermost jelly layer, J. The macromolecular composition of the envelopes was determined by sodium dodecyl sulfate gel electrophoresis. The VE contained at least 11 glycoproteins with molecular weights ranging from 125 000 to less than 16 000 with two components (40 000 and 33 000) accounting for almost two-thirds of the total stainable material. The FE contained ten glycoproteins that had the same molecular weights as those in the VE. One glycoprotein component underwent a reduction in molecular weight from 77 000 to 67 500 when the VE was converted to the FE. This molecular weight change was interpreted as the probable result of limited proteolysis. In addition, the FE gel electrophoresis patterns contained macromolecular components derived from the cortical granules and jelly layer, J, consistent with the immunodiffusion experiments. These components were absent when the FE was prepared in the absence of Ca2+, suggesting a role for Ca2+ in binding the VE, cortical granules, and J components together. We concluded that the conversion of the glycoproteinaceous VE to FE at fertilization is caused by interaction of the VE with components from the cortical granules and jelly layer J. These interactions are of both a chemical and physical nature.     

Diagnosis and pathophysiology of paradoxical embolism

A review of the experience with 134 consecutive patients with germinal cell testicular neoplasia indicates that definitively accurate staging of the malignancy at presentation is the single most important prognostic factor. Nearly two-thirds of the patients with all types of germinal malignancies survived or died of other causes and the highest survival rates were seen among patients with earlier stages of seminoma. In recent years patients with all types of germinal malignancies of the testis have been treated by radical retroperitoneal lymphadenectomy with enhancement of survivals. Patients with seminoma and non-seminomatous tumors exhibited increased survival rates with node dissection. In 66 consecutive lymphadenectomies the complication rate was less than 14 per cent, with only 1 death related to the operation. Retroperitoneal lymphadenectomy not only affords therapeutic advantage but also provides an opportunity for accurate surgical staging of disease and allows for rational decision relative to additional treatment, radiation therapy or chemotherapy.