Modeling and optimization of fringe capacitance of nanoscale DGMOS devices

We analyze the impact of gate electrode thickness and gate underlap on the fringe capacitance of nanoscale double-gate MOS (DGMOS) transistors. We propose an analytical fringe capacitance model considering gate underlap and finite source/drain length. A comparison with the simulation results show that the model can accurately estimate the fringe capacitance of the device. We show that an optimum gate underlap can significantly reduce the fringe capacitance resulting in higher performance and lower power consumption. Also, the effects of process variation in gate underlap devices are discussed. Simulation results on a three-stage ring oscillator show that with optimum gate underlap 32% improvement in delay can be achieved.     

Synthesis of a new manufacturable high-quality graded gate oxidefor sub-0.2 μm technologies

Graded gate oxide process involves a two-step synthesis of growing an oxide at a temperature above the viscoelastic temperature (T_VE ) onto a pregrown low temperature thermally grown SiO₂ layer to form a composite graded SiO₂ structure. The cooling rate is carefully modulated near T_VE~925°C to enhance growth induced stress relaxation. The pregrown SiO₂ layer provides grading and is a sink for stress accommodation for the final high temperature SiO₂ forming the interface. Both grading and modulated cooling generate a strain-free and planar Si/SiO₂ interface. Such an interface delivers significant enhancement in all aspects of device reliability and performance. These oxides are of very high-quality, robust, and manufacturable with a process capability index, C_pk>1.5. Graded gate oxide is already in the primary path of our 0.16 μm and 0.12 μm technologies     

Effects of feeding an aquatic weed Lemna trisulaca as partial replacement of fish meal on the performance of growing ducklings

Growing ducklings were fed diets containing an aquatic weed Lemna trisulaca meal (LTM) replacing, on a protein basis, either 40, 60 or 80 g kg^?1 of the fish meal (FM) from a control diet which contained 120 g FM kg^?1. Partial replacement of FM (40 and 60 g kg^?1 of the FM) by LTM on a protein basis showed good growth and low food consumption but food conversion efficiency was found to be comparable. It was concluded that LTM could be considered as a protein feed supplement for growing ducklings and also as a part replacement of animal protein (FM) in the nutrition of growing ducklings without deleterious effect on performance.     

Design of AM-TCM schemes for the impulse noise environment

Channel coding for an impulse noise environment modeled as a Cauchy-Gaussian mixture is addressed. Code design based on the pairwise probability of error indicates the suitability of Hamming distance as a primary determinant of performance. Simulation results of code performance for the maximum likelihood (ML) and several suboptimal metrics are presented     

Cutoff rates for coordinate interleaved QAM over Rayleigh fadingchannels

Cutoff rates for (perfect) coordinate interleaving over flat Rayleigh fading channels are computed for some representative two-dimensional (2-D) and four-dimensional (4-D) quadrature amplitude modulation (QAM) schemes and compared to the standard symbol interleaved approaches. It is shown that for optimized coordinate interleaving [i.e., using optimum rotation parameters that maximize the cutoff rate for a given signal-to-noise ratio (SNR)], coding gains can be achieved vis-a-vis symbol interleaving that increases with the dimensionality of the signal constellation. Perfect coherent detection, as well as perfect channel state information are assumed     

Studies on ballistic parameters of di-butyl phthalate-coated triple base propellant used in large caliber artillery gun ammunition

Triple base propellant (TBP) containing mainly nitrocellulose, nitroglycerine, and nitroguanidine has been manufactured and coated with plasticizer in the present work. The aim was to study ballistics of di-butyl phthalate (DBP)-coated TBP. DBP solution in ethanol containing nitrocellulose dope was used for coating onto the propellant grains. DBP-deterred propellant showed inhibition to burning, resulting in lowering the values of ballistic parameters namely peak pressure (P_max), dP_max, pressure index (α), and burning rate coefficient (β) during closed vessel firing. Increase in percentage of DBP in coating solution led to further decrease in ballistic parameters. Dynamic evaluation of the surface-moderated propellant showed comparatively lower muzzle velocity and chamber pressure for deterred propellant batches without leaving any unburnt particles in gun chamber at subzero temperatures with the lowest possible charge mass. The DBP-coated propellant can be useful in 155-mm artillery gun to achieve higher loading density as it has lower flame temperature and chamber pressure as compared to uncoated propellant which will result in increasing barrel life due to reduction in the barrel erosion.     

Computer studies of the effect of electron and hole current multiplication factors on the d.c. and microwave properties of symmetrical Si DDR IMPATT devices

Computer studies are presented on the effect of carrier current multiplication on the d.c. field and current profiles and the small-signal admittance of a symmetrical Si double-drift region (DDR) IMPATT diode, taking into account the realistic field dependence of ionization rate and drift velocity of charge carriers and also the effect of mobile space-charge. The d.c. field and current profiles indicate that the lowering of the electron current multiplication (M_n) is more effective than the lowering of hole current Multiplication factor (M_p) in modifying the d.c. properties of Si DDR devices. The computer-aided small-signal analysis carried out for the same structure shows that, a lowering of M_n leads to a sharp decrease of the peak value of the small-signal negative conductance at a fixed d.c. current density which is accompanied by a shift of the frequency range of oscillation towards the higher frequency side.     

Effects of Thermal Expansion Mismatch Stresses on th Room-Temperature Fracture of Boron Carbid

Calculation of apparent fracture energies (γ_a) using the applied failure stress and fractographically determined flaw sizes (C) in B₄ C shows γ_a decreasing with C , once C < 100 μm. This is attributed to increasing contributions of microstructural stresses (σ_i) due to thermal expansion anisotropy ( 1 × 10⁻⁶°C⁻¹). Extrapolation of this σ_i contribution to C ∼ G (the grain size) and calculation from maximum thermal expansion mismatch are in reasonable agreement. e.g., giving σ∼ 1000 MPa. Strength-mirror size data also show deviations at higher strengths-smaller mirror sizes consistent with both the occurrence and estimated level of such microstructural stress contributions to failure.     

Laser-Induced Calcite—Aragonite Transition

High-pressure phases of CaCO₃, namely aragonite, calcite II, and possibly calcite III, were synthesized in air by exposing 10- to 20-μm-size particles of CaCO₃ (calcite I phase) to a CO₂ laser radiation at short pulse lengths (≤0.1 ms). The process, therefore, has the same effect as exposing the particles to at least several hundred megapascals pressure. Processing at higher pulse lengths resulted in the decomposition of CaCO₃ to CaO and CO₂. The extent of decomposition increased with increasing pulse length.     

Study of the effects of structural uncertainties on a fractional system of the first kind – application in vibration isolation with the CRONE suspension

In this paper, we deal with the effects of the uncertainties on a fractional system of the first kind, mainly on the frequency-domain and the time-domain responses. For the structural uncertainties, two main aspects are studied: the nonlinearities of the physical components used to realize the fractional system and the consideration of the previously neglected dynamics of the system. Both uncertainties are introduced for the hydropneumatic CRONE suspension, previously synthesized and realized without taking into consideration these uncertainties. So, the novel approach treated in this work is to find whether the uncertainties, which were previously neglected in the synthesis and the realization phases, alter the behaviour of the system or not. The results show that the fractional order system behaviour is not affected.