用于盐湖卤水吸附法提锂的连续离子交换工艺研究

采用连续离子交换技术用于盐湖卤水的吸附法提锂。针对青海一里坪盐湖老卤体系,开发了连续离子交换吸附提锂工艺,研究了操作参数对连续离子交换系统提锂性能的影响,并在优化的工艺条件下进行了长周期的稳定性评价。结果表明,在转动步进周期为20 min、卤水进料量为3.2 BV/h、淋洗水量为2.9 BV/h、解吸水量为9.3 BV/h、解吸温度为15~25 ℃时,连续离子交换系统可以稳定获得镁锂质量浓度比（简称镁锂比）在3左右、锂质量浓度接近1.1 g/L的合格液,锂回收率为98.5%以上。     

粉末注射成型技术的研究和应用

介绍了粉末注射成型技术的概念和工艺,包括金属粉末注射成型(MIM)、陶瓷粉末注射成型(CIM),讲述了黏结剂的使用发展情况;阐述了粉末注射成型专用注射成型机的特点,PIM粉末注射专用塑化系统,PIM专用料斗滑块装置,镶套式机筒座等,介绍了PIM技术在诸多行业中的应用,3C行业,医疗行业,汽车行业等,并展望了PIM研究的发展方向。     

膜富集-高强UV/SO32-体系高效降解PFOS的研究

工业废水中全氟辛烷磺酸(PFOS)浓度低,直接应用化学法降解能耗较高。采用膜分离与UV/SO3^2-光降解的组合工艺对其进行处理,研究了此组合技术的处理效果,并考察了影响降解率的因素。结果表明,反渗透膜可有效富集PFOS溶液,高强UV/SO3^2-体系可高效降解该富集溶液。提高溶液初始pH、SO3^2-浓度、紫外光强,均有利于PFOS降解率的提高,而PFOS初始浓度的提高会降低其降解率。     

Effects of oxyfluorination on a multi-walled carbon nanotube electrode for a high-performance glucose sensor

A glucose sensor electrode was prepared with multi-walled carbon nanotubes (MWNTs) because of its effect on surface modification through oxyfluorination. The oxyfluorination of MWNTs was carried out with F₂:O₂ ratios of 7:3, 5:5 and 3:7, which are labeled F7O3-MWNT, F5O5-MWNT, and F3O7-MWNT, based on the oxyfluorination conditions. The hydrophilic functional groups were introduced effectively on the hydrophobic carbon surface. In addition, the amorphous area of the MWNTs was affected by oxyfluorination. The reactivity of the glucose sensor was affected by the oxyfluorination treatment and the existence of amorphous on MWNTs. The optimum O/F percentage was approximately 50%. Therefore, the oxyfluorination conditions are important with amorphous MWNTs. The sensitivity was improved based on the effects of improved interface affinity between the enzyme and the carbon electrode. In addition, the presence of an amorphous area on MWNTs seems to be beneficial for efficient glucose oxidase immobilization, which results in high-performance glucose sensing.     

国产开放式电石炉导电颚板的改进

在考察分析了国产开放式电石炉导电颚权的消耗情况后，针对其存在的问题改进了导电颚板的设计，从而提高了导电颚板的使用寿命，延长了电石炉的运行周期。     

滑石粉原位聚合改性聚酯热熔胶的结晶性能

采用差示扫描量热仪研究了滑石粉原位聚合对聚酯热熔胶非等温结晶性能的影响,并用Takhor方程和莫志深非等温结晶动力学新方程处理所得数据。结果表明:滑石粉原位聚合显著促进了聚酯热熔胶的结晶,提高了结晶速率,表现在结晶温度和结晶活化能大幅提高,当降温速率分别为5,10℃/min时,半结晶时间缩短50%以上。动力学分析表明:莫志深方程适合描述聚酯热熔胶的非等温结晶过程,在达到相同相对结晶度时,加入滑石粉的聚酯热熔胶所需降温速率更小,缩短了热熔胶涂覆后的冷却固化时间。     

高韧性和高流动性PP／EPDM共混材料的研制

研究了乙丙橡胶的门尼粘度和结晶性对聚丙烯增韧效果的影响，结果表明，高门尼粘度，部分结晶性橡胶在获得较好韧性的同时不保持较高的刚性，但流动性较差，通过加入ＨＤＰＥ能在复合增韧的同时提高共混物的流动性，添加少量油酸酰胺和硬脂酰胺敢能适当提高共混物的流动性，采用过氧化物降解聚丙烯可以显著提高共混物的流动性，但韧性明显下降，采用可控降解和动态硫化相结合的技术是在得到高韧性，高流动性共混ＰＰ的有效途径。     

Na^＋和Ti^4＋对CaO—Al2O3—SiO2系玻璃结构和晶化的影响

使用ＲＡＭＡＮ光谱和ＤＴＡ方法研究了含少量Ｎａ＋和Ｔｉ４＋的ＣａＯ－Ａｌ２Ｏ３－ＳｉＯ２系玻璃，发现在纯ＣＡＳ系玻璃（Ｃａ／Ａｌ≥１／２，Ａｌ／Ｓｉ≤１）中，Ａｌ３＋仅有一部分进入玻璃网络，少量Ｎａ＋的引入，有助于Ａｌ３＋进一步进入玻璃网络中，Ｎａ＋起了间接补强玻璃网络的作用，Ｎａ＋和Ｃａ２＋离子对Ａｌ３＋进入玻璃网络结构程度的影响可认为是Ｎａ＋和Ｃａ２＋离子分别以［ＡｌＯ４］Ｎａ和［ＡｌＯ４］Ｃａ［ＡｌＯ４］基团的形式进入玻璃网络中，由于结合几率和体积效应，使［ＡｌＯ４］Ｎａ较［ＡｌＯ４］Ｃａ［ＡｌＯ４］更易进入玻璃网络中。Ｔｉ４＋以［ＴｉＯ４］的形式进入玻璃网络，它对Ａｌ３＋是否能进入玻璃网络无明显影响。Ｎａ＋和Ｔｉ４＋的单独引入，均能使玻璃网络的聚合程度增强，析晶活化能提高；而当Ｎａ＋和Ｔｉ４＋同时引入时，玻璃网络聚合程度和纯ＣＡＳ系玻璃相差不大，析晶活化能有所降低。少量Ｎａ＋的引入，不会影响析出主晶相的种类和数量，而Ｔｉ４＋的引入，则会影响到所析出主晶相的种类和数量。     

A study of one‐bath alkali–amine hydrolysis and silk‐fibroin finishing of polyester microfiber crepe fabric

In this study, the synergistic aminolysis (sodium hydroxide and ethylene diamine in one bath) mechanism of polyethylene terephthalate (PET) microfiber crepe fabric was preliminarily investigated. The results showed that not only active groups (i.e., ? NHR, ? COOH, and ? OH) but also considerable cracks and craters were introduced onto PET fibers, which provided locations for a subsequent crosslinking reaction and mechanical attachment and so facilitated the silk‐fibroin finishing. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1467–1473, 2001     

Miscibility and crystallization behavior of the solution‐blended sulfonated poly(phenylene oxide)/ poly(styrene‐co‐4‐vinyl pyridine) blend

The miscibility and crystallization behavior of the solution‐blended lightly sulfonated poly(phenylene oxide) (SPPO)/poly(styrene‐co‐4‐vinylpyridine) (PSVP) blend were investigated by conventional and modulated differential scanning calorimetry (MDSC). It was found that the original blend film is actually composed of a crystalline SPPO phase and a noncrystalline compatible SPPO–PSVP phase. The original phase‐segregated structure will evolve to a noncrystalline homogenous structure by subsequent high temperature annealing. The resulting good miscibility was attributed to two aspects: one is that the SPPO crystalline structure could be destroyed as annealing temperature is high enough; the other is that the acid–base interaction between the sulfonic group of SPPO and the pyridine ring of PSVP could promote mixing of different components effectively. And such acid–base interaction was demonstrated by ¹C NMR spectra. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2843–2848, 2001