Optimisation of enzymatic hydrolysis for concentration of squalene in palm fatty acid distillate

BACKGROUND: Squalene was concentrated from palm fatty acid distillate (PFAD) in this study using commercial immobilised Candida antarctica lipase (Novozyme 435^®). The PFAD was neutralised (NPFAD) using an alkali to liberate the free fatty acids and then hydrolysed at 65 ± 1 °C. The enzymatic hydrolysis on NPFAD was optimised using response surface methodology (RSM) before being neutralised again to obtain a concentrated squalene fraction. RESULTS: A five‐level, three‐factor central composite rotatable design was adopted to evaluate the effects of the enzymatic hydrolysis parameters reaction time (4–12 h), water content (50–70% w/w) and enzyme concentration (1.5–3.5% w/w) on the percentage yield of squalene concentration. The optimal reaction parameters for maximum yield of squalene concentration were identified from the respective contour plots. The optimal enzymatic hydrolysis conditions were a reaction time of 7.05 h, a water content of 61.40% w/w and an enzyme concentration of 2.23% w/w. CONCLUSION: RSM was used to determine the optimal conditions for enzymatic hydrolysis of NPFAD with C. antarctica lipase for maximum recovery of squalene which could be implemented on an industrial scale. Copyright © 2008 Society of Chemical Industry     

Dietary fiber from coconut flour: A functional food

To determine the effectiveness of dietary fiber present in coconut flour as a functional food, the following studies were conducted: (a) Dietary Fiber Composition and Fermentability of Coconut Flour; (b) The Effect of Coconut Flour on Mineral Availability from Coconut Flour Supplemented Foods; (c) Glycemic Index of Coconut Flour Supplemented Foods in Normal and Diabetic Subjects; and (d) The Cholesterol Lowering Effect of Coconut Flakes in Moderately Raised Cholesterol Levels of Humans. The dietary fiber content of coconut flour was 60.0 ± 1.0 g/100 g sample, 56% insoluble and 4% soluble. Fermentation of coconut flour produced short chain fatty acids with butyrate (1.73 ± 0.07 mmol/g fiber isolate) > acetate (1.40 ± 0.12; (P < 0.05) > propionate (0.47 ± 0.01; P < 0.05). Iron and zinc availability were highest for carrot cake (Fe, 33.3 ± 0.7%; Zn, 12.6 ± 0.1%) supplemented with 20% coconut flour while multigrain loaf supplemented with 10% and macaroons with 25% coconut flour were highest for calcium availability (63.4 ± 8.0% and 38.7 ± 1.1%, respectively). Increasing concentrations of dietary fiber from coconut flour did not affect mineral availability from all test foods. The significantly low glycemic index foods (< 60 mmol × min/l) investigated were: macaroons (45.7 ± 3.0), carrot cake (51.8 ± 3.3) and brownies (60.1 ± 5.4) with 20–25% coconut flour. The test foods containing 15% coconut flour has a glycemic index ranging from 61 to 77 mmol × min/l. Among the test foods, pan de sal (87.2 ± 5.5) and multigrain loaf (85.2 ± 6.8) gave significantly higher glycemic index with 5% and 10% coconut flour. On the other hand, granola bar and cinnamon which contained 5% and 10% coconut flour, respectively gave a glycemic index ranging from 62 to 76 mmol × min/l and did not differ significantly from the test foods containing 15% coconut flour (P < 0.05). A very strong negative correlation (r = − 85, n = 11, P < 0.005) was observed between the glycemic index and dietary fiber content of the test foods supplemented with coconut. There was a significant reduction (%) in serum total and LDL cholesterol for: oat bran flakes, 8.4 ± 1.4 and 8.8 ± 6.7, respectively; 15% coconut flakes, 6.9 ± 1.1 and 11.0 ± 4.0, respectively; and 25% coconut flakes, 10.8 ± 1.3 and 9.2 ± 5.4, respectively (P < 0.05). Serum triglycerides were significantly reduced for all test foods: corn flakes, 14.5 ± 6.3%; oat bran flakes, 22.7 ± 2.9%; 15% coconut flakes, 19.3 ± 5.7%; and 25% coconut flakes, 21.8 ± 6.0% (P < 0.05). Results from the above study can be a basis in the development of coconut flour as a functional food.

Industrial relevance

The functionality of coconut flour in terms of prevention for risk of chronic diseases, e.g. diabetes mellitus, cardiovascular diseases (CVD) and colon cancer, revealed increase production of coconut and coconut flour. The production of coconut flour is very economical because it can be produced in a small or large scale. The raw material is obtained from the by-product (waste) of the coconut milk industry and the process and equipment used in its production is simple and cheap. Coconut flour as a good source of dietary fiber can be added to bakery products, recipes and other food products for good health.     

Dynamic mechanical analysis studies of the interphase

The dynamic mechanical properties of unidirectional glass-fiber-reinforced polyester measured along the fiber direction were recently investigated. In the same polyester, the type of organosilane coated on the glass fiber, the amount of organosilane, the fiber volume fraction, and the fiber diameter affect the value of the loss tangent, tan δ, at the glass-transition temperature of the glass-fiber-reinforced polyester. The interfacial shear strength and the tan δ at the glass-transition temperature of the glass-fiber-reinforced polyester show good correlation suggesting that the latter can be used to characterize the quality of the interphase. Factors affecting the glass-transition temperature and the application of Zorowski and Murayama's equation in the characterization of the interfacial adhesion are also discussed.     

Iron(II)/reductant(DH2)-induced activation of dioxygen for the hydroxylation and ketonization of hydrocarbons; mimics for the cytochrome P-450 hydroxylase/reductase system

Several metal complexes [(FeII(DPAH)2 (DPAH2 = 2,6-dicarboxyl pyridine), FeII(PA)2 (PAH = picolinic acid), FeII(bpy)2(2+), FeII(OPPh3)4(2+), (Cl8TPP)FeIIIX (X = Cl, OH, SCH2Ph) [Cl8TPP = tetrakis (2,6-dichlorophenyl)porphyrin], (TPP) FeIIICl (TPP = tetraphenylporphyrin), and CuI(tpy)2+ (typ = 2,2'-6,2"-terpyridine)] in combination with one of several reductants [DH2; PhNHNHPh (mimic of dihydroflavin), PhNHNH2, ascorbic acid (H2asc), and PhCH2SH (model ligand for cysteine residue)] catalytically activate O2 (1 atm) for the hydroxylation of saturated hydrocarbons (e.g. c-C6H12-->c-C6H11OH). This chemistry closely parallels that of cytochrome P-450 proteins, and both appear to involve a Fenton-like reactive intermediate), [LxFeOOH(DH)]. With cyclohexane as the substrate the dominant product is its ketone (as well as significant amounts of its hydroperoxide). 1,4-Cyclohexadiene (with two double-allylic carbon centers) undergoes dehydrogenation to give benzene, but also yields substantial amounts of phenol via ketonization of an allylic carbon. The 1:1 FeII(bpy)2(2+)/(PhNHNH2 or H2asc), FeII(PA)2/H2asc, and (Cl8TPP)FeIIICl/PhNHNH2 combinations initiate the autoxidation of 1,4-cyclohexadiene with turnover numbers (moles of product per mole of reductant) from 71 to 26, respectively (alpha-tocophenol reduces the turnover numbers by 20-80%). With respect to aerobic biology, the present results indicate that dysfunctional transition metals (degradation products of metalloproteins) in combination with biological reductants activate O2 for reaction with organic substrates. The level of activation is similar to that for Fenton reagents and cytochrome P-450 hydroxylases. Hence, dysfunctional transition metals, reductants, and O2 are a hazardous combination within a biological matrix.     

Prevention of the influence of fibrin and alpha2-macroglobulin in the continuous measurement of the thrombin potential: implications for an endpoint determination of the optical density

We proposed the endogenous thrombin potential (ETP) as an overall function test of the coagulation system. We recently introduced a routine test which requires defibrinated plasma. In order to develop an assay in which the ETP-value can be directly obtained by measuring the optical density, we investigated two methods to inhibit fibrinogen clottability and to inactivate alpha2-macroglobulin. The first method makes use of hydroxylamine to inactivate alpha2-macroglobulin and H-Gly-Pro-Arg-Pro-OH to inhibit fibrin polymerization. At pH 7.35, plasma incubated with 25 mM hydroxylamine and 1.5 mg/mL H-Gly-Pro-Arg-Pro-OH for 5 minutes at 37 degrees C resulted in a reduced endlevel of the amidolytic activity on small chromogenic substrates. The second method uses a metalloprotease purified from Crotalus basiliscus to remove alpha2-macroglobulin from plasma in combination with H-Gly-Pro-Arg-Pro-OH. Herein plasma is incubated with 3.5 LM protease during 15 minutes at 37 degrees C in the presence of 1 mg/mL polymerization inhibitor. The enzymatic method results in a zero endlevel of the amidolytic activity and this would imply that measurement of the ETP is reduced to an endpoint determination of the optical density. We show that the endpoint determination of the optical density correlates well with the calculated ETP in plasmas with different degrees of anticoagulation.     

Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

Comparison of ionic liquid,acid and alkali pretreatments for sugarcane bagasse enzymatic saccharification

BACKGROUND: Much attention has been given to applying ionic liquids (ILs) as an alternative pretreatment method for lignocellulosic biomass. This study aims to select the most suitable type of IL for pretreating sugarcane bagasse (SCB). The potential of ILs for pretreatment was evaluated and compared with conventional pretreatment media, acids and alkalis. The performance of the pretreatment media was evaluated based on the amount of reducing sugar produced from enzymatic saccharification, the energy requirement, and changes in the chemical structure and crystallinity index of the pretreated bagasse. RESULTS: 1‐ethyl‐3‐methylimidazolium acetate [EMIM]oAc was selected as the most suitable IL for SCB pretreatment. The optimum yields of reducing sugar obtained from [EMIM]oAc‐, alkali‐, and acid‐pretreated SCB were 69.5%, 92.8% and 41.3%, respectively. Although a lower yield of reducing sugar was obtained, [EMIM]oAc pretreatment required the least energy to pretreat 1 kg of SCB. Moreover, the percentage of SCB loss during [EMIM]oAc pretreatment was the lowest. [EMIM]oAc‐pretreated SCB also had the lowest crystallinity index (CI) with the most amorphous structure. CONCLUSION: [EMIM]oAc appears to be another option for pretreating SCB, and other issues such as the recyclability of [EMIM]oAc is worth investigating. Copyright © 2011 Society of Chemical Industry     

A switching-parameter algorithm for finding multiple solutions of nonlinear resistive circuits

An efficient algorithm for finding multiple solutions of a system of nonlinear algebraic equations is presented. This algorithm consists of solving an associated system of first order nonlinear differential equations whose independent variable may be switched from one variable to another during each integration step. The choice of the forward Euler predictor and Newton-Raphson corrector for integrating the differential equations leads to an extremely efficient method for implementing this switching-parameter algorithm. This approach involves only the recursive solution of an associated system of linear algebraic equations and can be easily programmed. The switching-parameter algorithm can also be used to derive the driving-point or transfer characteristic curve of multivalued resistive nonlinear networks.     

A simple dynamic circuit model for mos structure

A new simple circuit model for the MOS (metal-oxide-semiconductor) structure is presented. the model consists of three elements, namely, a linear capacitor, a non-linear capacitor and a C-dynamic element. Each component bears a simple relationship to the physical operating mechanism inside the MOS structure. the model can be used for simulating arbitrary MOS structure circuits under all operating conditions. In particular, it is capable of reproducing the structure's frequency-dependent small-signal characteristics. the model is also shown to exhibit many important and interesting dynamic behaviours under forward, reverse and sinusoidal operating modes. The model is based mainly upon the device's physical operating principles. But perhaps the most significant implication of this model is that it is the first ever to use a dynamic element to model the MOS structure from a physical approach.