Experimental and theoretical comparison of NIR spectroscopy measurements of cerebral hemoglobin changes

Two near-infrared spectroscopy (NIRS) methods are available for measuring changes (Delta) in total cerebral hemoglobin concentration (CHC): 1) a continuous measurement of the changes in total hemoglobin concentration (Delta[Hb]tot) and 2) the difference between two absolute measurements of CHC, each derived from a small, controlled change in inspired O2 fraction. This paper investigates the internal consistency of these two methods by using an experimental and theoretical comparison. NIRS was used to measure [Hb]tot in five newborn piglets before and after a change in arterial PCO2. Delta[Hb]tot demonstrated a low coefficient of variation of 2.8 +/- 2.8 (SD) % which allowed changes in CO2-cerebral blood volume reactivity to be clearly discriminated. However, a high coefficient of variation of 22.8 +/- 3.5% on the DeltaCHC measurements obscured any CO2 reactivity changes. A theoretical analysis demonstrates the effects of optical pathlength, background absorption, scatter, and blood vessel diameter on both methods. For more accurate monitoring of CHC, individual measurements of optical pathlength and more accurate pulse oximetry are required.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Analysing inaccurate artifact usages in workflow specifications

Although many workflow models have been proposed, analyses on artifacts are seldom discussed. A workflow application with well structured and adequate resources may still fail or yield unexpected results in execution due to inaccurate artifact manipulation, for example, inconsistency between data flow and control flow, or contradictions between artifact operations. Thus, artifact analysis is very important since activities cannot be executed properly without accurate information. This paper presents a three-layer workflow model for designing a workflow and characterises the behaviour of an artifact by its state transition diagram. By abstracting common usages of artifacts, six types of inaccurate artifact usage affecting workflow execution are identified and a set of algorithms to detect these inaccurate usages in workflow specifications is presented. An example is demonstrated and then related works are compared.     

A 4.5-GHz 130-nm 32-KB L0 cache with a leakage-tolerant self reverse-bias bitline scheme

This paper describes a 32-KB two-read, one-write ported L0 cache for 4.5-GHz operation in 1.2-V 130-nm dual-V/sub TH/ CMOS technology. The local bitline uses a leakage-tolerant self reverse-bias (SRB) scheme with nMOS source-follower pullup access transistors, while preserving robust full-swing operation. Gate-source underdrive of -220 mV on the bitline read-select transistors is established without external bias voltages or gate-oxide overstress. Device-level measurements in the 130-nm technology show 72/spl times/ bitline active leakage reduction, enabling low-V/sub TH/ usage, 40% bitline keeper downsizing, and 16 bitcells/bitline. 11% faster read delay and 2/spl times/ higher dc noise robustness are achieved compared with high-performance dual-V/sub TH/ bitline scheme. Sustained performance and robustness benefits of the SRB technique against conventional dynamic bitline with scaling to 100- and 70-nm technology is also presented.     

Two schemes for detecting CMOS analog faults

A design-for-testability scheme for detecting CMOS analog faults was reported by Favalli et al. (see ibid., vol.25, no.5, p.1239-46, 1990). The authors propose two alternative designs, one for small circuits and another for large circuits, which require significantly less area overhead (about 1/4 to 1/3) than that of Favalli's design. With the proposed modification in the first design, the untestable problem, which occurred in Favalli's design, can be alleviated. Furthermore, the proposed schemes are also fit to be implemented in VLSI circuits     

Robustness of VS-MRAC with respect to unmodelled dynamics and external disturbances

A variable structure model reference adaptive controller (VS-MRAC) using only input and output measurements was recently proposed and shown to be globally asymptotically stable with superior transient behaviour and disturbance rejection properties. In this paper a singular perturbation approach is used in order to establish the robustness of the controller in the presence of unmodelled dynamics (parasitics) and disturbances. We develop a new Lyapunov-based technique to analyse the overall system and show that for sufficiently small parasitics the system remains stable and the output error is small in some sense.     

The material properties of sulphonated phenolic resin reinforced cement mortars

The material properties of new sulphonated phenolic resin (SP) reinforced cement mortars have been investigated. SP was found to promote the dispersion of cement particles and to interact with Ca(OH)₂. As a result, the resulting mortars exhibit better workability, more compact structure and higher compressive strength than plain mortars. The mortar with 1 wt% SP present after 28 days curing exhibits a compressive strength of 66MPa, which is about 18% higher than that of plain mortar.     

Onset of gas self-induction and power consumption after gas induction in an agitated tank

The behavior of inducted gas from liquid surface and the; power requirements in an agitated tank using a mechanical agitator are studied in order to increase the amount of gas self-induction and the gas retention time for gas absorption. A 45° six-blade downward impeller turbine was utilized in this study. Air and water, air and 40 wt% 60 wt%, and 80 wt% of glycerin water, and air and 106 cP silicon oil were employed as gas and liquid phases. Variables which were studied included geometrical factors (immersed depth of impeller, baffle with and diameter of impeller) and the physical properties of the liquid (viscosity, density, and surface tension). The correlations for the onset speed of impeller and power consumption after gas induction in the agitated tank are established from our experimental results. The amount of gas self-induction from the liquid surface in the agitated tank increases with increasing impeller diameter and speed and decreases with increasing baffle width, depth of impeller and viscosity of liquid.     

DNA recognition by the EcoK methyltransferase. The influence of DNA methylation and the cofactor S-adenosyl-L-methionine

The methyltransferase of the EcoK type I restriction/modification system is trimeric, M2S1, where the S subunit determines the sequence specificity of the enzyme. The methyltransferase has a strong preference for hemimethylated substrate DNA and, therefore, we have investigated the effect of the methylation state of DNA on binding by the enzyme, together with the effects on binding of the cofactor S-adenosyl-L-methionine. Our results indicate that the methyltransferase has two non-interacting S-adenosyl-L-methionine binding sites, each with a dissociation constant of 3.60 (+/- 0.42) microM determined by equilibrium dialysis, or 2.21 (+/- 0.29) microM determined by the displacement of a fluorescent probe. Ultraviolet light-induced crosslinking showed that S-adenosyl-L-methionine binds strongly only to the modification (M) subunits. Changes in the sedimentation velocity of the methyltransferase imply a protein conformational change due to S-adenosyl-L-methionine binding. Gel retardation results show that the binding of S-adenosyl-L-methionine to the methyltransferase enhances binding to both specific and non-specific DNAs, but the enhancement is greater for the specific DNA. Differences in binding affinities contribute to the recognition of the specific nucleotide sequence AAC(N)6GTGC by the methyltransferase in preference to a non-specific sequence. In contrast, although the complexes of unmodified and hemimethylated DNAs with the methyltransferase have different mobilities in non-denaturing gels, there appears to be no contribution of binding affinity to the distinction between these two substrates. Therefore, the preference for a hemimethylated substrate must be due to a difference in catalysis.