Improving indoor air quality through the use of continual multipoint monitoring of carbon dioxide and dew point

This article summarizes an approach for improving the indoor air quality (IAQ) in a building by providing feedback on the performance of the ventilation system. The delivery of adequate quantities of ventilation to all building occupants is necessary for the achievement of good IAQ. Feedback on the performance includes information on the adequacy of ventilation provided, the effectiveness of the distribution of this air, the adequacy of the duration of operation of the ventilation system, and the identification of leakage into the return plenum, either of outdoor or supply air. Keeping track of ventilation system performance is important not only in terms of maintaining good IAQ, but also making sure that this system continues to perform as intended after changes in building use. Information on the performance of the ventilation system is achieved by means of an automated sampling system that draws air from multiple locations and delivers it to both a carbon dioxide monitor and dew point sensor. The use of single shared sensors facilitates calibration checks as well as helps to guarantee data integrity. This approach to monitoring a building's ventilation system offers the possibility of achieving sustainable performance of this important aspect of good IAQ.     

Comparison of the resistance of C57BL/6 and C3H/He mice to infection with Mycobacterium paratuberculosis

Susceptibility of C57BL/6 (Bcgs) and C3H/HeN (Bcgr) mice to an intraperitoneal infection with Mycobacterium paratuberculosis strain 19698 was compared (by histopathology and the number of mycobacteria isolated from the spleen). Mycobacterial counts from the spleen of Bcgr mice progressively decreased over the course of infection but remained unchanged in Bcgs mice. Granulomatous lesions and acid-fast bacteria were consistently present in the liver and lymph nodes of Bcgs mice, whereas lesions were transient or absent in Bcgr mice. These results indicate that Bcgr mice are inherently resistant to M. paratuberculosis, whereas Bcgs mice are inherently susceptible. These differences may prove useful in elucidating the mechanisms of resistance and susceptibility to paratuberculosis and other mycobacterial infections.     

Phase I trial of weekly scheduling and pharmacokinetics of titanocene dichloride in patients with advanced cancer

PURPOSE: To determine the maximum-tolerated dose (MTD) and the dose-limiting toxicities (DLTs) of a weekly schedule of titanocene dichloride (TD) and to define the pharmacokinetics of titanium in plasma and urine. PATIENTS AND METHODS: Twenty patients with a median age of 58 years received 83 courses of TD. TD was given as 1-hour infusion at escalating doses from 70 to 185 mg/m2/wk. Pharmacokinetic analysis was performed in eight patients for total plasma titanium (TPTi) and in three patients for ultrafiltrable titanium (UFTi). RESULTS: At the fifth dose level (185 mg/m2/wk), a variety of DLTs were seen in five patients: fatigue in three, bilirubinemia in one, and hypokalemia in two. A further six patients were treated at 140 mg/m2; only one had dose-limiting creatinine elevation and this dose was therefore defined as the MTD. No myelosuppression or alopecia were observed. One patient with adenocarcinoma of unknown primary had a minor response. Pharmacokinetic analysis showed that TPTi maximum concentration (Cmax) values were linear with dose and elimination of TPTi was triphasic with a long terminal half-life (t1/2; median, 165 hours; range, 89 to 592). Between 7% and 24.3% of the total of administered titanium was eliminated in urine over the first 24 hours. In contrast, UFTi elimination was described by a one-compartment model with a t1/2 of 0.41 hours; peak levels of UFTi were 5.2% +/- 2.5% those of TPTi. CONCLUSION: The MTD of TD given on a weekly schedule is 140 mg/m2, with cumulative, but reversible creatinine and bilirubin elevation being the DLTs.     

Comparative evaluation of FUNGITEST and broth microdilution methods for antifungal drug susceptibility testing of Candida species and Cryptococcus neoformans

The FUNGITEST method (Sanofi Diagnostics Pasteur, Paris, France) is a microplate-based procedure for the breakpoint testing of six antifungal agents (amphotericin B, flucytosine, fluconazole, itraconazole, ketoconazole, and miconazole). We compared the FUNGITEST method with a broth microdilution test, performed according to National Committee for Clinical Laboratory Standards document M27-A guidelines, for determining the in vitro susceptibilities of 180 isolates of Candida spp. (50 C. albicans, 50 C. glabrata, 10 C. kefyr, 20 C. krusei, 10 C. lusitaniae, 20 C. parapsilosis, and 20 C. tropicalis isolates) and 20 isolates of Cryptococcus neoformans. Overall, there was 100% agreement between the methods for amphotericin B, 95% agreement for flucytosine, 84% agreement for miconazole, 83% agreement for itraconazole, 77% agreement for ketoconazole, and 76% agreement for fluconazole. The overall agreement between the methods exceeded 80% for all species tested with the exception of C. glabrata (71% agreement). The poorest agreement between the results for individual agents was seen with C. glabrata (38% for fluconazole, 44% for ketoconazole, and 56% for itraconazole) and C. tropicalis (50% for miconazole). The FUNGITEST method misclassified as susceptible 2 of 12 (16.6%) fluconazole-resistant isolates, 2 of 10 (20%) itraconazole-resistant isolates, and 4 of 8 (50%) ketoconazole-resistant isolates of several Candida spp. Further development of the FUNGITEST procedure will be required before it can be recommended as an alternative method for the susceptibility testing of Candida spp. or C. neoformans.     

Effect of silver addition on superconductivity in the Bi1.6Pb0.4Sr1.6Ca2Cu3O10−y system

Silver/superconductor composites containing 0 to 80 vol% silver have been prepared and their properties determined. Optimum heat treatment at sintering temperatures ( 800° C) under low oxygen pressures produces material with high critical current density and improves physical properties. Magnetic susceptibility measurements have been found to be consistent with resistivity results. In order to retain a single high-T _c phase with increasing silver content, decreased oxygen partial pressures are required. Using the normal-state resistivity of these composites, a percolation threshold at a silver volume fraction of 43% was observed, while zero resistivity measurements show that a continuous superconducting network can be obtained with up to 80 vol% silver. The critical current density of 21 vol% silver-doped samples was found to be 1520 A cm^–2 at 77.3 K, compared to 260 A cm^–2 for an undoped sample.     

Synthesis of telechelic monodispersed diols

Summary The synthesis of telechelic monodispersed diols produced from the radical telomerization of an excess of undecylenol with commercialy available , -dithiols HSC₂H₄XC₂H₄SH (X=0, S or CH₂) initiated by peroxides is presented. In each case, the diols were obtained selectively and quantitatively and they were characterized by both ¹H and ¹³C NMR. Their physical characteristics (Tg, T_m and decomposition temperatures) were determined. Such compounds are thermally more stable than polydispersed telechelic commercially available diols.     

The availability of nitrogen following topsoil application of liquid digested sludge

Samples (375 g) of the Evesham series (clay loam) soil were incubated under aerobic conditions at 20 °C following incorporation of liquid mesophilic digested sewage sludge (1150 mg N L^–1). Simultaneously, pot trials under field conditions were also established. Total soluble N total oxides of nitrogen, ammonium N and headspace carbon dioxide samples were determined periodically over the first 480 day degrees C. Soluble organic N fractions were also calculated and it was found that the soil water concentration of available N (as nitrate N) could be predicted from summation of SON and NH₄-N on sludge application. The accumulation of nitrate N was compared with field derived data and both correlated well to a 2 pool exponential model. High rates of nitrification were observed and 70% of the organic N applied was mineralised over 480 day degrees C. The use of the relative quantity of soluble to insoluble organic N could be a possible indicator of subsequent nitrogen availability in field application.     

Nitrogen-containing aluminium titanate

In the Ti-Al-O-N system a phase isostructural to aluminium titanate but with expanded unit cell dimensions was observed. It was stable between 1400 and 1700 °C and has unit cell dimensions of a=0.3719 nm, b=0.9703 nm and c=0.9869 nm with a composition of Ti _1.00 ⁴⁺ Al _0.54 ³⁺ Ti _1.46 ³⁺ N _0.28 ^3– O _4.58 ^2– _0.14 Several samples were prepared by reaction sintering mixtures of TiN, Al₂O₃ and AlN powders at 1400 to 1470 °C for 4 h in a nitrogen atmosphere to maximize this phase. One specific advantage of the nitrogen-containing aluminium titanate over aluminium titanate is that the former is unchanged at 1150 °C in a nitrogen atmosphere whereas the latter decomposes. In the Al₂O₃-TiO₂ oxide system Al₂TiO₅ solid solution extends to approximately Al_0.75Ti_2.25O₅ at 1470 °C under the mildly reducing conditions of a graphite furnace. The unit cell volume increases linearly with the increasing replacement of Al³⁺ by Ti³⁺.