A data base management system for industrial process control

Present-day systems for monitoring energy distribution must be capable of handling continuous changes in the structure and the extent of the data. Only a data base system which satisfies the special requirements of process control can cope with this. The process real-time information management System for on-line Control (PRIMO) data base system described here is implemented on DEC PDP-11 computers from $\text{11}\text{34}$ upwards and is used for process control in Brown Boveri energy control software systems.     

Hepatic structure-pharmacokinetic relationships: the hepatic disposition and metabolite kinetics of a homologous series of O-acyl derivatives of salicylic acid

1. The hepatic disposition and metabolite kinetics of a homologous series of O-acyl (acetyl, propionyl, butanoyl, pentanoyl, hexanoyl and octanoyl) esters of salicylic acid (C2SA, C3SA, C4SA, C5SA, C6SA and C8SA, respectively) was determined using a single-pass, in-situ rat liver preparation. 2. The hepatic venous outflow profiles for the parent esters and the generated metabolite, salicylic acid (SA) were analysed by HPLC. Non-parametric moments analysis was used to determine the area under the curve (AUC'), mean transit time (MTT) and normalized variance (CV2) for the parent esters and generated SA. 3. Pregenerated SA ([14C]-salicylic acid) was injected into each liver with the parent ester to determine its distribution characteristics. 4. The overall recovery of ester plus metabolite was 89% of the ester dose injected and independent of the ester carbon number, suggesting that ester extraction was due to hepatic metabolism to salicylic acid. 5. The metabolite AUC' value increased directly with the lipophilicity of the parent ester (from 0.12 for C2SA to 0.95 for C8SA). By contrast, the parent AUC' decreased with the lipophilicity (from 0.85 for C2SA to zero for C8SA). The metabolite MTT value also showed a trend to increase with the lipophilicity of the parent ester (from 15.72 s for C3SA to 61.97 s for C8SA). However, the parent MTT value shows no significant change across the series. 6. The two-compartment dispersion model was used to derive the kinetic parameters for parent ester, pregenerated SA and generated SA. Consequently, these parameters were used to estimate the values of AUC', MTT and CV2 for the parent ester and metabolite. The moments values obtained using the two-compartment dispersion model show similar trends to the corresponding moments values obtained from the outflow profiles using a non-parametric approach. 7. The more lipophilic aspirin analogues are more confined to the portal circulation after oral administration than aspirin due to their more extensive hepatic elimination avoiding systemic prostacyclin inhibition. Given that aspirin's selectivity as an anti-thrombotic agent has been postulated to be due to selective anti-platelet effects in the portal circulation, the more lipophilic and highly extracted analogues are potentially more selective anti-thrombotic agents than aspirin.     

Proof testing of ceramic femoral heads for hip joint implants

A proof test procedure for the rejection of defective ceramic hip ball heads in the production line is presented. The procedure consists of applying a load to each ceramic ball head. This load, being somewhat higher than the maximum physiological load, should not cause any damage in cases where the highly stressed areas are free of flaws. In this procedure, a polymer ring is positioned inside the ball head bore between a socket and the head of a tie bolt. Once the tie bolt is pulled downwards, the ring creates a radial pressure on the inner bore surface of the ball head. With an iterative approach based on finite element analysis, the proof test design was optimized in order to obtain a stress distribution in the ball head similar to that resulting in in vivo conditions. The calculated results were validated by strain gauge measurements performed on an assembled proof test apparatus. Several polymers were considered for the ring. Ultrahigh-molecular-weight polyethylene (UHMWPE grade RCH 1000) showed the best durability properties and lowest wear rates. The requirement to perform 1000 reruns without significant reduction of stress in the ball head was fulfilled. Although other proof test procedures for ceramic femoral heads already exist, the procedure presented in this article shows advantages concerning maintenance and operating costs.     

Korrosionsschutz in der maritimen Technik

Corrosion protection in marine technology Prof. Schmitt always regarded it as ultimate ambition for his several roles in organisations and apprenticeship to bring together the corrosion experts of different disciplines for discussion. This is essential for this widespread task to be in a position to break new ground and to learn from colleagues. Everyone considers the own field of work something special – so do the authors of this article. The sea as surrounding of ships and platforms requires a disposability of 24 hours, trustiness, low maintenance, safety for men and products under a simultaneous global competition. Thrift is in the foreground, but the above‐mentioned items are to be observed. Therefore reasonable does not always mean practicable. This idea will be introduced to all discussions of the midland and plant construction and vehemently supported by the marine technology.     

Analysis of the peroxisomal acyl‐CoA oxidase gene product from Pichia pastoris and determination of its targeting signal

Acyl‐CoA oxidase (Pox1p) is involved in the β‐oxidation of fatty acids and is targeted to the peroxisomal matrix via the use of different signals in various organisms. In rat, mouse and human, Pox1p contains a canonical peroxisomal targeting signal 1 (PTS1), whereas in the yeasts Candida tropicalis, Saccharomyces cerevisiae, C. maltosa and Yarrowia lipolytica neither a PTS1 nor a PTS2 sequence is present, suggesting that Pox1p might be targeted to the peroxisomes via a third unknown pathway. Alternatively, since proteins lacking a PTS sequence can enter peroxisomes in association with other polypeptides containing a PTS, Pox1p might ‘piggy‐back’ its way into the peroxisomal matrix together with other proteins. To understand the mechanism of peroxisomal targeting of a yeast Pox1p, we cloned the Pichia pastoris POX1 gene to study the pathway of import of PpPox1p into peroxisomes. The gene was cloned by PCR, hybridization and plasmid rescue. The 2157 bp gene encodes a protein with a predicted molecular weight of 80 kDa. Antisera against PpPox1p detected a protein specifically induced on oleate with an apparent molecular weight of 72 kDa. Immunolocalization studies confirmed the peroxisomal localization of PpPox1p. The carboxy‐terminus of PpPox1p ends with a PTS1‐like sequence, APKI. The sequence PKI was necessary for transport of PpPox1p into peroxisomes and interacted with the PTS1 receptor, Pex5p. Furthermore, addition of the sequence APKI to the C‐terminus of the green fluorescent protein directed this fusion protein to the peroxisome. Therefore, PpPox1p uses the PTS1 pathway for its import into peroxisomes. Copyright © 1999 John Wiley & Sons, Ltd.     

The yeast growth control gene GRC5 is highly homologous to the mammalian putative tumor suppressor gene QM

We isolated the Saccharomyces cerevisiae GRC5 (gr owth control) gene by functional complementation in vivo of a ts (t emperature s ensitive) mutation. Phenotypic analysis suggested involvement of GRC5 in cell growth and proliferation. Mutant cells arrest their cell cycles after one to three cell divisions predominantly as mother cells with a large bud. In the region of the septum, a massive accumulation of cell wall material is observed. The mother and daughter nuclei are well separated and spindles are no longer present, while the cytoskeleton is of aberrant appearance. Arrested cells do not perform protein synthesis and are unable to mate. Furthermore, grc5-1^ts cells rapidly lose viability at the restrictive temperature (37°C) only on full media, but not under nitrogen-starvation conditions, indicating that proper response to this nutrient limitation is still intact in mutant cells after cell cycle arrest. The sequence of GRC5 translates into a basic protein of 221 amino acids with a corresponding M_r of 25·4 kDa. GRC5 is a member of the highly conserved QM gene family, members of which have been reported from plants, invertebrates and vertebrates. The amino acid sequence of GRC5 over its entire length is more than 60% identical to the human QM protein, expression of which is associated with loss of the tumorigenic phenotype in a cell line derived from Wilms' tumor, a malignancy of the embyronic kidney. Here, we show that GRC5 is an essential yeast gene, the function of which as inferred from analysis of the grc5-1^ts mutant is crucial for establishment of proper cytoskeletal structure and regulation of growth in yeast cells.     

The pathway to intelligent implants: osteoblast response to nano silicon-doped hydroxyapatite patterning

Bioactive hydroxyapatite (HA) with addition of silicon (Si) in the crystal structure (silicon-doped hydroxyapatite (SiHA)) has become a highly attractive alternative to conventional HA in bone replacement owing to the significant improvement in the in vivo bioactivity and osteoconductivity. Nanometre-scaled SiHA (nanoSiHA), which closely resembles the size of bone mineral, has been synthesized in this study. Thus, the silicon addition provides an extra chemical cue to stimulate and enhance bone formation for new generation coatings, and the next stage in metallic implantation design is to further improve cellular adhesion and proliferation by control of cell alignment. Topography has been found to provide a powerful set of signals for cells and form contact guidance. Using the recently developed novel technique of template-assisted electrohydrodynamic atomization (TAEA), patterns of pillars and tracks of various dimensions of nanoSiHA were achieved. Modifying the parameters of TAEA, the resolution of pattern structures was controlled, enabling the topography of a substrate to be modified accordingly. Spray time, flow rate and distance between the needle and substrate were varied to improve the pattern formation of pillars and tracks. The 15 min deposition time provided the most consistent patterned topography with a distance of 50 mm and flow rate of 4 µl min⁻¹. A titanium substrate was patterned with pillars and tracks of varying widths, line lengths and distances under the optimized TAEA processing condition. A fast bone-like apatite formation rate was found on nanoSiHA after immersion in simulated body fluid, thus demonstrating its high in vitro bioactivity. Primary human osteoblast (HOB) cells responded to SiHA patterns by stretching of the filopodia between track and pillar, attaching to the apex of the pillar pattern and stretching between two. HOB cells responded to the track pattern by elongating along and between the track, and the length of HOB cells was proportional to the gaps between track patterns, but this relationship was not observed on the pillar patterns. The study has therefore provided an insight for future design of next generation implant surfaces to control and guide cellular responses, while TAEA patterning provides a controllable technique to provide topography to medical implants.     

Comparison of the element composition in several plant species and their substrate from a 1500000-km2 area in Northern Europe.

Leaves of 9 different plant species (terrestrial moss represented by: Hylocomium splendens and Pleurozium schreberi; and 7 species of vascular plants: blueberry, Vaccinium myrtillus; cowberry, Vaccinium titis-idaea; crowberry, Empetrum nigrum; birch, Betula pubescens; willow, Salix spp.; pine, Pinus sylvestris and spruce, Picea abies) have been collected from up to 9 catchments (size 14-50 km2) spread over a 1500000 km2 area in Northern Europe. Soil samples were taken of the O-horizon and of the C-horizon at each plant sample site. All samples were analysed for 38 elements (Ag, Al, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Rb, S, Sb, Sc, Se, Si, Sn, Sr, Th, Tl, U, V, Y, Zn and Zr) by ICP-MS, ICP-AES or CV-AAS (for Hg-analysis) techniques. The concentrations of some elements vary significantly between different plants (e.g. Cd, V, Co, Pb, Ba and Y). Other elements show surprisingly similar levels in all plants (e.g. Rb, S, Cu, K, Ca, P and Mg). Each group of plants (moss, shrubs, deciduous and conifers) shows a common behaviour for some elements. Each plant accumulates or excludes some selected elements. Compared to the C-horizon, a number of elements (S, K, B, Ca, P and Mn) are clearly enriched in plants. Elements showing very low plant/C-horizon ratios (e.g. Zr, Th, U, Y, Fe, Li and Al) can be used as an indicator of minerogenic dust. The plant/O-horizon and O-horizon/C-horizon ratios show that some elements are accumulated in the O-horizon (e.g. Pb, Bi, As, Ag, Sb). Airborne organic material attached to the leaves can thus, result in high values of these elements without any pollution source.