Cost benefits from standardization of the packaging glass bottles

This study deals with a recycling system with two competing brewers. It is assumed that they coordinate their manufacturing operations through standardization of their glass bottles for easy implementation of extended producer responsibility (EPR). Immediate benefits from the standardization are three folds. Firstly, the sorting and exchange processes of the bottles collected for reuse by each brewer become no longer necessary. Secondly, cost reduction is achieved through streamlining of collection and reuse processes. Finally, under the stochastic demand of glass bottles their inventory holding costs and lost sales cost are reduced via inventory pooling. Through the development of the mathematical models we determine an optimal operation policy of the two brewers that maximizes the sum of benefits obtained from standardization. Numerical examples are solved to show the validity of the model. Sensitivity tests are also performed to examine the effects of system parameters on the objective function value and decision variables.     

Resonance properties and mass sensitivity of monolithic microcantilever sensors actuated by piezoelectric PZT thick film

The PZT thick film cantilever devices fabricated via MEMS process have much attraction because they are appropriate for biological transducer or sensor, resulting from their large actuating force and relatively high sensitivity especially in liquid. By means of resonance behavior, theoretical calculation and experimental verification of the PZT thick film cantilever devices have not been studied before. Accordingly, we focused on the sensitivity analysis and interpretation of the PZT thick film cantilevers in this study. Especially, the investigation for mass sensitivity of the PZT thick film cantilever is of importance for physical, chemical and biological sensing application. The PZT thick film cantilever devices were constructed on Pt/TiO₂/SiN _X /Si substrates using screen printing method and MEMS process. The harmonic oscillation response (resonance frequency) was measured using an optical laser interferometric vibrometer. The effect of cantilever geometry on the resonance frequency change was investigated. Compared with the theoretical resonant frequency change by mass loading, the experimental resonant frequency change of the PZT micromechanical thick film cantilever shows a variation of less than 2%. Mass sensitivities are estimated to be 30.7, 57.1 and 152.0 pg/Hz for the 400 × 380 μm, 400 × 480 μm and 400 × 580 μm cantilever, respectively.     

Parallel optical transmitter module using angled fibers and a V-grooved silicon optical bench for VCSEL array

We propose an advanced structure of optical subassembly (OSA) for packaging of the vertical-cavity surface-emitting laser (VCSEL) array, using (111) facet mirror of the V-groove ends formed in a silicon optical bench (SiOB) and angled fiber apertures. The feature of our OSA can provide a low optical crosstalk between neighboring channels, a low feedback reflection, and a large misalignment tolerance along the V-groove. We describe the optimized design of fiber angle, VCSEL position, and fiber position. The fabricated OSA structure consists of 12 channels of angled fiber array, 54.7/spl deg/ V-grooves, Au-coated mirrors on (111) end facet of the V-grooves, and flip-chip-bonded VCSEL array on a SiOB. In this structure, the beam emitted from the VCSEL is deflected at the 54.7/spl deg/ mirror of (111) end facet and propagated into the angled fiber. The angled fiber array was polished by 57/spl deg/. Fabricated OSAs showed a coupling efficiency of 30%-50% that is 25 times larger than that obtained from an OSA with a vertically flat fiber array. Our OSA showed large misalignment tolerance of about 90 /spl mu/m along the longitudinal direction in the V-groove. We fabricated a parallel optical transmitter module using the OSA and demonstrated 12 channels /spl times/2.5 Gb/s data transmission with a clear eye diagram.     

Efficient Algorithms for Computing a Complete Visibility Region in Three-Dimensional Space

Given a set P of polygons in three-dimensional space, two points p and q are said to be visible from each other with respect to P if the line segment joining them does not intersect any polygon in P . A point p is said to be completely visible from an area source S if p is visible from every point in S . The completely visible region CV(S, P) from S with respect to P is defined as the set of all points in three-dimensional space that are completely visible from S . We present two algorithms for computing CV(S, P) for P with a total of n vertices and a convex polygonal source S with m vertices. Our first result is a divide-and-conquer algorithm which runs in O(m ² n ² α(mn)) time and space, where α(mn) is the inverse of Ackermann's function. We next give an incremental algorithm for computing CV(S,P) in O(m ² n+mn ² α(n)) time and O(mn+n ² ) space. We also prove that CV(S,P) consists of Θ(mn+n ² ) surface elements such as vertices, edges, and faces. Received November 16, 1995; revised November 11, 1996.     

Two additional cases of metformin‐associated encephalopathy in patients with end‐stage renal disease undergoing hemodialysis

We report on two additional cases of metformin‐associated encephalopathy in patients with end‐stage renal disease (ESRD) undergoing hemodialysis. Two patients were seen at our hospital with abnormal neurological signs and symptoms. Magnetic resonance imaging (MRI) revealed the same pattern of high signal intensity in both basal ganglia in T2‐weighted images in the two patients. The two patients had started taking metformin 5 and 6 weeks earlier at the same dose of 1000 mg per day. Metformin was immediately stopped, and regular hemodialysis was conducted. Their signs and symptoms resolved completely after these measures. The high signal intensity in both ganglia in T2‐weighted MRI also disappeared. We should suspect metformin‐induced encephalopathy and withdraw the drug when presented with diabetic patients with chronic kidney disease and neurological signs and symptoms of unknown cause.     

Gaseous Nanocarving‐Mediated Carbon Framework with Spontaneous Metal Assembly for Structure‐Tunable Metal/Carbon Nanofibers

Vapor phase carbon (C)‐reduction‐based syntheses of C nanotubes and graphene, which are highly functional solid C nanomaterials, have received extensive attention in the field of materials science. This study suggests a revolutionary method for precisely controlling the C structures by oxidizing solid C nanomaterials into gaseous products in the opposite manner of the conventional approach. This gaseous nanocarving enables the modulation of inherent metal assembly in metal/C hybrid nanomaterials because of the promoted C oxidation at the metal/C interface, which produces inner pores inside C nanomaterials. This phenomenon is revealed by investigating the aspects of structure formation with selective C oxidation in the metal/C nanofibers, and density functional theory calculation. Interestingly, the tendency of C oxidation and calculated oxygen binding energy at the metal surface plane is coincident with the order Co > Ni > Cu > Pt. The customizable control of the structural factors of metal/C nanomaterials through thermodynamic‐calculation‐derived processing parameters is reported for the first time in this work. This approach can open a new class of gas–solid reaction‐based synthetic routes that dramatically broaden the structure‐design range of metal/C hybrid nanomaterials. It represents an advancement toward overcoming the limitations of intrinsic activities in various applications.     

Sunitinib release from biodegradable films of poly(l-lactide-co-caprolactone)

The aim of this study was to prepare sunitinib-loaded biodegradable films using poly(l-lactide-co-?-caprolactone) (PLCL) for anti-tumor drug delivery. Sunitinib-loaded PLCL film has a rough surface, while empty film has a smooth surface. PLCL film loaded with 5% (w/w) sunitinib showed an absence of a crystalline peak of sunitinib, while sharp peaks were observed at 10% (w/w) loading, indicating that sunitinib was molecularly distributed in the polymer matrix at 5% (w/w). A drug release study revealed an initial burst during the first 2 h, followed by continuous release until 24 h. Since weight loss of film was <10% for 1 week, drug release mechanism was dominantly dependent on the diffusion-mediated release of drugs to the medium. Sunitinib has a dose-dependent anti-proliferation effect against HuCC-T1 human cholangiocarcinoma cells in vitro. These results indicate that sunitinib-loaded PLCL film is a appropriate candidate as a vehicle for anti-tumor drug delivery.     

Preparation and evaluation of poly(2-hydroxyethyl aspartamide)-hexadecylamine-iron oxide for MR imaging of lymph nodes

The purpose of this study was to synthesize biocompatible poly(2-hydroxyethyl aspartamide)–C₁₆-iron oxide (PHEA-C₁₆-iron oxide) nanoparticles and to evaluate their efficacy as a contrast agent for magnetic resonance imaging of lymph nodes. The PHEA-C₁₆-iron oxide nanoparticles were synthesized by coprecipitation method. The core size of the PHEA-C₁₆-iron oxide nanoparticles was about 5 to 7 nm, and the overall size of the nanoparticles was around 20, 60, and 150 nm in aqueous solution. The size of the nanoparticles was controlled by the amount of C₁₆. The 3.0-T MRI signal intensity of a rabbit lymph node was effectively reduced after intravenous administration of PHEA-C₁₆-iron oxide with the size of 20 nm. The in vitro and in vivo toxicity tests revealed the high biocompatibility of PHEA-C₁₆-iron oxide nanoparticles. Therefore, PHEA-C₁₆-iron oxide nanoparticles with 20-nm size can be potentially useful as T2-weighted MR imaging contrast agents for the detection of lymph nodes.