Serum leptin in eutrophic and overweight Venezuelan children and adolescents

Leptin is closely related to obesity and its complications. In order to determine serum levels of this hormone in children and adolescents, and its associations to age, gender, socioeconomic status, nutritional anthropometrical status and dietary intake, 166 children and adolescents (91 normal and 75 obese, aged 2 to 15 years), from low socioeconomic status were assessed. A socioeconomic evaluation (Grafffar-Mendez C method), dietary intake (24 hour recalls), anthropometrical assessment and leptin by ELISA were performed. Normal or eutrophic was defined as weight for height (W/H) or Body mass index (BMI) and fatty area between 10th and 90th percentile. Obesity when indicators were over 90th percentile. Leptin was significantly higher in obese than in normal, without differences by gender or age. Leptin percentile distribution showed 11.53 microg/L and 24.29 microg/L as 90th percentile for normal and obese children, respectively. There was a tendency to inverse correlation among leptin, fat dietary intake and waist-thigh ratio. Excessive fat intake was associated to lower serum leptin. Results suggest that obese children had leptin resistance, independently of age and gender. It is recommended to develop nutritional education programs regarding obesity and dietary intake in order to prevent and control infantile obesity.     

Effect of streptozotocin on the ultrastructure of rat pancreatic islets

Our objective was to study the effects of three (30, 40, and 50 mg/kg) doses of Streptozotocin (STZ) on fasting plasma glucose level (FPG) and observe its effects at the cellular level in rat pancreas by electron microscopy. FPG was measured in rats before induction of diabetes and then on 3, 7, and 14 days after induction of diabetes with STZ. Keto diastix urine strips were used to check urine glucose and ketone bodies. Two weeks after the induction of diabetes, the rat pancreas was removed and fixed for light and electron microscopic studies. Three days after induction, the mean FPG level was 112 mg/dl in Group I (30 mg/kg STZ), 217 mg/dl in Group II (40 mg/kg STZ), and 376 mg/dl in Group III (50 mg/kg STZ). Histology was normal in Group I but revealed altered islet structure in Groups II and III. Ultrastructure revealed intact D cells in all three groups. The focal mitochondria and Golgi complex swelling found in A and B cells was occasional in Group I and frequent in Groups II and III. Swelling of other organelles and reduction in the size and number of granules was further observed in Group III. It is our conclusion that the 30-mg/kg body weight STZ produces mild changes while 50 mg/kg proves to be fatal. STZ at 40 mg/kg has a moderate effect on plasma glucose as well as on the islets of Langerhans at a cellular level.     

Contact CMOS imaging of gaseous oxygen sensor array

We describe a compact luminescent gaseous oxygen (O₂) sensor microsystem based on the direct integration of sensor elements with a polymeric optical filter and placed on a low power complementary metal-oxide semiconductor (CMOS) imager integrated circuit (IC). The sensor operates on the measurement of excited-state emission intensity of O₂-sensitive luminophore molecules tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) ([Ru(dpp)₃]²⁺) encapsulated within sol-gel derived xerogel thin films. The polymeric optical filter is made with polydimethylsiloxane (PDMS) that is mixed with a dye (Sudan-II). The PDMS membrane surface is molded to incorporate arrays of trapezoidal microstructures that serve to focus the optical sensor signals on to the imager pixels. The molded PDMS membrane is then attached with the PDMS color filter. The xerogel sensor arrays are contact printed on top of the PDMS trapezoidal lens-like microstructures. The CMOS imager uses a 32 × 32 (1024 elements) array of active pixel sensors and each pixel includes a high-gain phototransistor to convert the detected optical signals into electrical currents. Correlated double sampling circuit, pixel address, digital control and signal integration circuits are also implemented on-chip. The CMOS imager data is read out as a serial coded signal. The CMOS imager consumes a static power of 320 μW and an average dynamic power of 625 μW when operating at 100 Hz sampling frequency and 1.8 V DC. This CMOS sensor system provides a useful platform for the development of miniaturized optical chemical gas sensors.     

Properties of C/C-SiC composites produced via transfer moulding and inner siliconization

Short carbon fiber reinforced polymers (CFRP) are successfully prepared by transfer moulding technology. For this purpose, compounds on the basis of novolac/urotropin with different 6 mm chopped carbon fibers and silicon powder contents are produced utilizing a laboratory tempered sigma-blade kneader. These compounds are then shaped into 46 × 8 × 3 mm³ CFRP specimens using a transfer moulding machine. Depending on the material composition, the conversion to C/C-SiC composites is performed through liquid silicon infiltration (LSI) process or inner siliconization. First, the short fiber content is varied between 30 and 50 wt% and its influence on the process and properties of the composites is studied. Second, an investigation of the inner siliconization through the co-mixing of silicon powder (1-23 wt% in CFRPs) during the compound production as well as a comparison with the external silicon infiltration process are presented and discussed. According to the results, the best mechanical properties are achieved at a fiber content of 40 wt% in the case of the external silicon infiltration and at silicon content below 14 wt% for composites produced by the inner siliconization process.     

Mixing and sink effects of air purifiers on indoor PM2.5 concentrations: A pilot study of eight residential homes in Fresno,California

We measured real-time and integrated PM2.5 inside eight occupied single-family homes in Fresno, California to evaluate how turbulent air mixing and pollutant removal caused by a filter-based air purifier influences the levels of fine particles in everyday indoor environments. In each home, we used a real-time monitor to log PM2.5 levels every 5 min over 12 weeks during which air purifiers were operating, except for a designed 3-day shutdown period for baseline measurements. We assessed how the operation of air purifiers changed the patterns of the frequency distributions for short-term (5 min) concentrations, which included spikes produced by sporadic indoor activities or emissions. This allowed us to examine the reduction effectiveness of air purifiers on concentrations of both recently emitted and well-mixed background aerosols. We observed a systematic change in the 5-min PM2.5 distributions in different homes—while air purifiers reduced 96% of the 5-min concentrations, they increased the magnitudes of the top 4%, representing transient concentration peaks. This phenomenon is consistent with what would be theoretically expected based on passive scalar turbulence in fluid physics. We also collected gravimetric filter samples for PM2.5 composition, finding mean reductions of the long-term (2–5 days) concentrations of 29%–37% for indoor PM2.5 and endotoxin. A less significant reduction (19%–26%) was seen for Pb (Lead).

© 2016 American Association for Aerosol Research     

Cobalt‐Catalyzed Twofold Direct C(sp2)−C(sp3) Bond Coupling: Regioselective C‐3 Alkylation of Coumarins with (Cyclo)alkyl Ethers

A cobalt‐catalyzed regioselective C‐3 alkylation of coumarins was realized under mild reaction conditions, during which a variety of substituted coumarins including those containing sensitive functional groups could smoothly undergo the selective C(sp²)−C(sp³) bond formation with a series of cyclic or straight‐chain alkyl ethers.

     

Metal‐Free Synthesis of 3‐Arylquinolin‐2‐ones from N,2‐Diaryl‐ acrylamides via Phenyliodine(III) Bis(2,2‐dimethylpropanoate)‐ Mediated Direct Oxidative C−C Bond Formation

Treatment of N,2‐diarylacrylamides with the organoiodine(III) compound phenyliodine(III) bis(2,2‐dimethylpropanoate) [PhI(O₂C‐t‐Bu)₂] and boron trifluoride etherate (BF₃⋅Et₂O) resulted in a direct and selective oxidative C(sp²)−C(sp²) bond formation leading to a convenient assemblage, under mild conditions, of the biologically important 3‐arylquinolin‐2‐one skeleton. Differing from the five‐membered oxindole products from oxidative cyclizations mediated by transition metals, this metal‐free approach realized a direct annulation of the N‐arylacrylamide into a six‐membered 3‐arylquinolin‐2‐one skeleton.

     

Adverse Reactions to Wheat or Wheat Components

Wheat is an important staple food globally, providing a significant contribution to daily energy, fiber, and micronutrient intake. Observational evidence for health impacts of consuming more whole grains, among which wheat is a major contributor, points to significant risk reduction for diabetes, cardiovascular disease, and colon cancer. However, specific wheat components may also elicit adverse physical reactions in susceptible individuals such as celiac disease (CD) and wheat allergy (WA). Recently, broad coverage in the popular and social media has suggested that wheat consumption leads to a wide range of adverse health effects. This has motivated many consumers to avoid or reduce their consumption of foods that contain wheat/gluten, despite the absence of diagnosed CD or WA, raising questions about underlying mechanisms and possible nocebo effects. However, recent studies did show that some individuals may suffer from adverse reactions in absence of CD and WA. This condition is called non‐celiac gluten sensitivity (NCGS) or non‐celiac wheat sensitivity (NCWS). In addition to gluten, wheat and derived products contain many other components which may trigger symptoms, including inhibitors of α‐amylase and trypsin (ATIs), lectins, and rapidly fermentable carbohydrates (FODMAPs). Furthermore, the way in which foods are being processed, such as the use of yeast or sourdough fermentation, fermentation time and baking conditions, may also affect the presence and bioactivity of these components. The present review systematically describes the characteristics of wheat‐related intolerances, including their etiology, prevalence, the components responsible, diagnosis, and strategies to reduce adverse reactions.