Multi-rate model predictive control of particle size distribution in a semibatch emulsion copolymerization reactor

A multi-rate model predictive controller algorithm is presented for the in-batch closed-loop control of the full particle size distribution (PSD) in a semibatch emulsion copolymerization system. The lack of frequent measurements of the PSD and the measurement delay of these measurements are addressed through the use of frequent density measurements from which the current conditions of the system are estimated. The high dimensionality of the discretized full PSD is reduced by the use of model order reduction based on principal component analysis. This method effectively reduces the size of the problem while preserving the main characteristics of the population balance system. Disturbances that perturb the surfactant and monomer amounts inside the semibatch vinyl acetate–butyl acrylate reactor are considered to demonstrate the performance of the proposed control algorithm.     

Artificial Algae Optimization with Deep Belief Network Enabled Ransomware Detection in IoT Environment

The Internet of Things (IoT) has gained more popularity in research because of its large-scale challenges and implementation. But security was the main concern when witnessing the fast development in its applications and size. It was a dreary task to independently set security systems in every IoT gadget and upgrade them according to the newer threats. Additionally, machine learning (ML) techniques optimally use a colossal volume of data generated by IoT devices. Deep Learning (DL) related systems were modelled for attack detection in IoT. But the current security systems address restricted attacks and can be utilized outdated datasets for evaluations. This study develops an Artificial Algae Optimization Algorithm with Optimal Deep Belief Network (AAA-ODBN) Enabled Ransomware Detection in an IoT environment. The presented AAA-ODBN technique mainly intends to recognize and categorize ransomware in the IoT environment. The presented AAA-ODBN technique follows a three-stage process: feature selection, classification, and parameter tuning. In the first stage, the AAA-ODBN technique uses AAA based feature selection (AAA-FS) technique to elect feature subsets. Secondly, the AAA-ODBN technique employs the DBN model for ransomware detection. At last, the dragonfly algorithm (DFA) is utilized for the hyperparameter tuning of the DBN technique. A sequence of simulations is implemented to demonstrate the improved performance of the AAA-ODBN algorithm. The experimental values indicate the significant outcome of the AAA-ODBN model over other models.     

Political Optimizer with Deep Learning-Enabled Tongue Color Image Analysis Model

Biomedical image processing is widely utilized for disease detection and classification of biomedical images. Tongue color image analysis is an effective and non-invasive tool for carrying out secondary detection at anytime and anywhere. For removing the qualitative aspect, tongue images are quantitatively inspected, proposing a novel disease classification model in an automated way is preferable. This article introduces a novel political optimizer with deep learning enabled tongue color image analysis (PODL-TCIA) technique. The presented PODL-TCIA model purposes to detect the occurrence of the disease by examining the color of the tongue. To attain this, the PODL-TCIA model initially performs image pre-processing to enhance medical image quality. Followed by, Inception with ResNet-v2 model is employed for feature extraction. Besides, political optimizer (PO) with twin support vector machine (TSVM) model is exploited for image classification process, shows the novelty of the work. The design of PO algorithm assists in the optimal parameter selection of the TSVM model. For ensuring the enhanced outcomes of the PODL-TCIA model, a wide-ranging experimental analysis was applied and the outcomes reported the betterment of the PODL-TCIA model over the recent approaches.     

Effect of CR and FT-paraffin versus SBS modification in terms of conventional and rheological properties

In this study, the rheological and conventional properties of binders prepared with crumb rubber (CR) and FT-paraffin were compared to styrene-butadiene-styrene (SBS)-modified binders’ properties. The objective of this study was to determine which modified binders in different combinations of the CR and the FT-paraffin exhibited better performance than the SBS-modified binders, in terms of conventional and rheological properties. Results showed that the additives exhibited different performances for different types of tests. Many of the combinations including the common usage of the CR and the FT-paraffin performed better at high temperature than the SBS modification. Overall, the test results show that the binders prepared by 6% CR with 3 and 4% FT-paraffin and those prepared with 8% CR with 3% FT-paraffin were better binders than the 4% SBS-modified binder, in terms of low and high temperature properties.     

Behaviour of sand–clay mixtures for road pavement subgrade

Materials forming sand grains and colluvial soil deposits have a distinct structure, consisting of a composite matrix of coarse and fine soil grains. The influence of sand grains content on the behaviour of sand–clay mixtures was investigated by a series of intensive laboratory experiments. The California bearing ratio (CBR), unconfined compression strength (UCS) and compaction tests were carried out on various contents of sand and clay mixtures. The sand–clay mixtures were prepared with sand contents of 0, 10, 20, 30, 40, and 50% by weight. The laboratory tests on these mixtures have indicated that their behaviour will depend on the relative concentration of the sand and clay samples. The results of the tests showed a decrease in the UCS, and an increase the CBR values with an increase in the amount of sand. An increase in dry unit weight and a decrease in respective moisture content by an increase in the amount of sand were observed in the compaction tests.     

Bond calibration method for Young’s modulus determination in the discrete element method framework

A new methodology for the calibration of bond microparameters in rocks represented by a package of joined random spherical particles in the discrete element method (DEM) framework is presented. Typically, calibration is achieved through a trial-and-error procedure using several DEM simulations of uniaxial compressive tests (UCTs). The bond calibration model (BCM) does not need a time-dependent UCT-DEM simulation to establish the relation between the microproperties of the bond and the macroproperties of the rock specimen. The BCM uses matrices to describe the interaction forces exerted by bonds and, by means of an assembly process similar to the finite element method, it can describe the complex network of bonds, enabling the model to capture small variations in particle size and bond distribution as demonstrated in this work. In this work, the BCM is presented and compared with UCT simulations performed using Esys Particle software. Multiple simulations are done with constant bond properties and different particle size ratios (\(D_{MAX}/D_{MIN})\) that cause small variations in the specimen’s Young’s modulus; these variations are well captured by the BCM with an error of <10%.