Possible use of volcanic ash as a filler in polyphenylene sulfide composites: Thermal,mechanical, and erosive wear properties

It is a common practice to use particle materials as fillers to improve engineering properties of polymer composites and to lower the cost of final products. There is an obvious cost advantage of compounding volcanic ash (VA) in polymers, either to replace traditional fillers. This study is concerned with thermal, mechanical, and erosive properties of VA‐filled polyphenylene sulfide (PPS) composites. Composite samples containing VA particles at various concentrations (0, 2.5, 5, 10, 15, and 20 wt%) were manufactured by twin screw extruder and injection molding machine. Thermal properties were investigated by thermogravimetric and dynamic mechanical analysis methods. Erosive wear properties were investigated by performing solid particle erosion tests at 30º and 90º impingement angles. The mechanical properties such as flexural strength and modulus of uneroded samples and residual flexural strength and modulus of eroded composite samples were determined by three‐point bending tests. Results show that thermal, mechanical, and residual mechanical properties of the PPS composite were significantly improved by adding VA, although erosion resistance was decreased markedly. It was concluded that VA can be used as a reinforcement in PPS composites to improve thermal and mechanical properties and to reduce the cost of the PPS composites. POLYM. COMPOS., 35:1826–1833, 2014. © 2014 Society of Plastics Engineers     

Real-Time Monitoring of Organic Carrot (var. Romance) During Hot-Air Drying Using Near-Infrared Spectroscopy

The worldwide consumption of dried carrot (Daucus carota L.) is on a growing trend. Conventional methods for drying carrots include hot-water blanching followed by hot-air drying, which is usually uncontrolled and therefore prone to product quality deterioration. Thus, there is a need for innovative drying systems that yield high-value end products. In this study, the efficacy of NIR spectroscopy for the non-destructive monitoring of physicochemical changes and drying behaviour in organic carrot slices during 8-h hot-air drying at 40 °C was demonstrated using Partial least squares (PLS) regression and PLS discriminant analysis (PLS-DA). The impact of hot-water blanching pre-treatment (at 95 °C for 1.45 min) for enzyme inactivation on performances of both regression and classification models was also evaluated. PLS regression models were successfully developed to monitor changes in water activity (R ² = 0.91–0.96), moisture content (R ² = 0.97–0.98), total carotenoids content (R ² = 0.92–0.96), lightness for unblanched carrots (R ² = 0.80–0.83) and hue angle for blanched samples (R ² = 0.85–0.87). Soluble solids content prediction was poor for both treatments (RMSEP = 3.43–4.40). Classification models were developed to recognise dehydration phases of carrot slices on the basis of their NIR spectral profile using K-means and PLS-DA algorithms in sequence. The performance of each PLS-DA model was defined based on its accuracy, sensitivity and specificity rates. All of the selected models provided from good (> 0.85) to excellent (> 0.95) sensitivity and specificity for the predefined drying phases. Feature selection procedures yielded both regression and classification models with performances very similar to models computed from the full spectrum.     

Ester-functionalized single-walled carbon nanotubes via addition of haloformates

Herein, a versatile method to introduce ester functional groups to the surface of single-walled carbon nanotubes (SWCNTs) was defined. Ester-modified SWCNTs were prepared via the direct reaction of haloformates with reduced SWCNTs [(nBu–SWCNT ^n? ) Li _n ⁺ ] generated by n-butyl lithium. Ultraviolet–Visible–near infrared and Raman spectroscopy verified the evidence of covalent surface functionalization. Solubility of functionalized SWCNTs (f-SWCNTs) enhanced compared to purified SWCNTs. Gold tagging to positively charged SWCNTs displayed the presence and distribution of functional groups, confirming the conversion of esters into amides. f-SWCNTs were further characterized by thermo-gravimetric analysis coupled with mass spectrometry and fourier-transform infrared spectroscopy.     

Effect of Lithium Enrichment on the Tritium Breeding Characteristics of Various Breeders in a Fusion Driven Hybrid Reactor

Selection of lithium containing materials is very important in the design of a deuterium–tritium (DT) fusion driven hybrid reactor in order to supply its tritium self-sufficiency. Tritium, an artificial isotope of hydrogen, can be produced in the blanket by using the neutron capture reactions of lithium in the coolants and/or blanket materials which consist of lithium. This study presents the effect of lithium-6 enrichment in the coolant of the reactor on the tritium breeding of the hybrid blanket. Various liquid–solid breeder couples were investigated to determine the effective breeders. Numerical results pointed out that the tritium production increased with increasing lithium-6 enrichment for all cases.     

Low-Cost Dielectric Reflective Surface for Low-Level Backscattered Diffuse Reflections

This article presents the design of non-subwavelength, non-resonant, and non-absorptive dielectric surface that creates a low-level backward diffuse reflections under illumination of a far-field plane wave at millimeter wave regime. Thus, radar cross section reduction of a solid metallic object can be achieved. The dielectric surface is consist of unit cells of only two different electric permittivity (ε _r1?=?6.14 and ε _r2?=?3.49) distributed across the surface aperture to achieve low-level backscattered diffuse reflections. The unit cells used are having non-subwavelength size (0.53λ_80GHz) which ensures an easier fabrication of the presented surface using low cost simple PCB technology, in particular at high frequencies. RCS reduction of more than 10 dBsm is achieved from 70 to 87 GHz (BW?≈?21.65 %) using the presented dielectric surface of optimized permittivity distribution. The RCS reduction capabilities of the presented surface are studied theoretically under both normal and oblique incidences and then fabricated and verified experimentally by reflectivity measurements.     

The behaviour of some derivatives of 1,2,4-triazine toward organomagnesium halides

6-Phenyl-3,5-dioxo-2,3,4,5-tetrahydro-1,2,4-triazine 1 , 3-oxo-5,6-diphenyl-2,3-dihydro-1,2,4-triazine 3 , 3,5,6-triphenyl-1,2,4-triazine 4 , and 3-chloro-5,6-diphenyl-1,2,4-triazine 8 , react with phenylmagnesium bromide. The reactions involved are represented by scheme A. Compound 3 reacts with o- and/or p-methoxyphenylmagnesium bromide to give compounds believed to have structures like 10 and 11 respectively. Compound 1 reacts with methylmagnesium bromide and with benzylmagnesium chloride to give products believed to have structures like 12 a , b .     

Coronary artery bypass grafting versus percutaneous coronary intervention in end-stage kidney disease: A systematic review and meta-analysis of clinical studies

The most significant complication of end-stage kidney disease (ESKD) is cardiovascular disease, mainly coronary artery disease (CAD). Although the effective treatment of CAD is an important prognostic factor, whether percutaneous coronary intervention (PCI) or coronary artery bypass grafting (CABG) is better for treating CAD in this group of patients is still controversial. We searched Pubmed/Medline, Web of Science, Embase, the Cochrane Central Register of Controlled Trials articles that compared the outcomes of CABG versus PCI in patients with ESKD requiring dialysis. A total of 10 observational studies with 39,666 patients were included. Our analysis showed that when compared to PCI, CABG had lower risk of need for repeat revascularization (relative risk [RR] = 2.25, 95% confidence interval [CI] 2.1–2.42, p < 0.00001) and cardiovascular death (RR = 1.19, 95% CI 1.14–1.23, p < 0.00001) and higher risk for short-term mortality (RR = 0.43, 95% CI 0.38–0.48, p < 0.00001). There was no statistically significant difference between the PCI and CABG groups in the risk for late mortality (RR = 1.05, 95% CI 0.97–1.14, p = 0.25), myocardial infarction (RR = 1.05, 95% CI 0.46–2.36, p = 0.91) or stroke (RR = 1.02, 95% CI 0.64–1.61, p = 0.95). This meta-analysis showed that in ESKD patients requiring dialysis, CABG was superior to PCI in regard to cardiovascular death and need for repeat revascularization and inferior to PCI in regard to short term mortality. However, this meta-analysis has limitations and needs confirmation with large randomized controlled trials.