Application of GaN-based ultraviolet-C light emitting diodes--UV LEDs--for water disinfection

GaN-based ultraviolet-C (UV-C) light emitting diodes (LEDs) are of great interest for water disinfection. They offer significant advantages compared to conventional mercury lamps due to their compact form factor, low power requirements, high efficiency, non-toxicity, and overall robustness. However, despite the significant progress in the performance of semiconductor based UV LEDs that has been achieved in recent years, these devices still suffer from low emission power and relatively short lifetimes. Even the best UV LEDs exhibit external quantum efficiencies of only 1-2%.The objective of this study was to investigate the suitability of GaN-based UV LEDs for water disinfection. The investigation included the evaluation of the performance characteristics of UV LEDs at different operating conditions as well as the design of a UV LED module in view of the requirements for water treatment applications. Bioanalytical testing was conducted using Bacillus subtilis spores as test organism and UV LED modules with emission wavelengths of 269 nm and 282 nm.The results demonstrate the functionality of the developed UV LED disinfection modules. GaN-based UV LEDs effectively inactivated B. subtilis spores during static and flow-through tests applying varying water qualities. The 269 nm LEDs reached a higher level of inactivation than the 282 nm LEDs for the same applied fluence. The lower inactivation achieved by the 282 nm LEDs was compensated by their higher photon flux. First flow-through tests indicate a linear correlation between inactivation and fluence, demonstrating a well designed flow-through reactor. With improved light output and reduced costs, GaN-based UV LEDs can provide a promising alternative for decentralised and mobile water disinfection systems.     

Measurement of the intrinsic process zone in rock using acoustic emission

Laboratory specimens with a smooth boundary (no notch) were fabricated from four different rock types (grain sizes from 0.1–10 mm) and were tested in three-point bending. The locations of acoustic emission that occurred around peak load were used to characterize the dimensions of the region of localized microcracking, the so-called intrinsic process zone. The size of this zone was found to vary significantly between the rock types, but was not found to vary significantly for different size beams of the same material. An approximately linear relation was found between the width of the intrinsic process zone and the logarithm of the grain size. An explanation of size effect evolves naturally by considering the intrinsic process zone as a material characteristic. Two different models were used to analyze stress at failure. The first treated the intrinsic process zone as a mathematical crack, an infinite stress raiser, from which a K_IC value was calculated. The second model assumed the intrinsic process zone was a cohesive notch, a finite stress raiser, from which the theoretical tensile strength was defined. The second method seemed somewhat better at predicting size effect on nominal peak stress.     

Large bending of pipes

The computer model developed has been used successfully for studying the large pipe-bending problem frequently encountered in offshore structural engineering. The pipe-soil interaction is modelled by using the Coulomb friction law. The modified finite element approach coupled with a modified tangent stiffness procedure is used to handle the nonlinearities (geometric and material, etc.) in the problem. The material nonlinearity has been considered both by the plastic-hinge method and by an elastic-plastic method. Before studying the practical problems, sufficient check problems were analysed and a good agreement was found between theoretically exact solutions and the results obtained from the developed computer model.     

Smoke development at different energy flux levels in an NBS smoke density chamber

An automatically controlled high-energy flux heater has been developed and utilized in an NBS Smoke Density Chamber.     

Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.     

Field measurement of the air flow characteristics of big mechanically ventilated spaces

Air speeds induced by mechanical ventilation systems in the occupied zone are studied experimentally in seven railway stations in Hong Kong. Values of air speed at different positions are measured. From these values, air speed contours and turbulence intensities are calculated. Macroscopic numbers describing airflow in a space including the Reynolds number and the jet momentum number are estimated and their potential uses are discussed.     

Continuous monitoring of short term dissolved oxygen and algal dynamics

Dissolved oxygen (DO) in coastal bays with frequent algal blooms can undergo significant diurnal changes. Short-term DO and algal dynamics in a sub-tropical, nitrogen-limited, marine ecosystem are studied by means of a specially designed telemetry system. The high resolution data show clearly the importance of the vertical DO structure, and its relationship with environmental variables (solar radiation, water temperature, wind, tidal current) and phytoplankton dynamics. The design, instrumentation and calibration, and operational experience of the system are described. The simple and robust system has proved useful in (i) providing continuous data for full testing of water quality models, and (ii) the planning of field experiments to study algal dynamics.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.