Nano boron nitride laminated poly(ethyl methacrylate)/poly(vinyl alcohol) composite films imprinted with silver nanoparticles as gas barrier and bacteria resistant packaging materials

Herein, nano boron nitride (BN) laminated poly(ethyl methacrylate) (PEMA)/poly(vinyl alcohol) (PVA) nanocomposite films are fabricated by using a simple in situ polymerization technique with incorporation of silver nanoparticles (Ag NPs). Structural investigations of PEMA/PVA/Ag@BN nanocomposite thin films are carried out by Fourier-transform infrared spectroscopy, dynamic light scattering, X-ray diffraction analysis, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, and mass spectrometry. The change in morphology of PEMA/PVA matrix due to the reinforcement of BN platelets are identified by electron microscopic studies. The unique tortuous paths are achieved by the dispersion of BN platelets by which gas penetration is restricted with enhancing the barrier properties of the material by 6.5 folds at 5 wt% BN content as compared with neat PEMA/PVA. Acid and alkali resistant along with biodegradability behavior of as-synthesized nanocomposites are studied. From limiting oxygen index (LOI) results, it is found that the prepared materials are fire retardant in nature owing to effective reinforcement of BN layers. Antibacterial activities of PEMA/PVA/Ag@BN nanocomposite are studied by Xanthomonas citri or axonopodis pv. Citri, Escherichia coli, and Xanthomonas oryzae pv. Oryzae because of Ag NPs reinforcement. The substantial improvements in gas barrier, fire retardant, and antibacterial properties enable the materials for packaging application.     

A simple approach to observe non-conductive hydrated materials with FE-SEM: Case study on porous hydroxyapatite green bodies

The purpose of this study is to develop a simple method to observe the surface morphology of non-conductive material in its hydrated condition. Here porous hydroxyapatite (HAp) green body prepared by gelcasting process was considered as a case study, and, the resultant body was subsequently treated with hydrophilic ionic liquid (IL). The surface morphology and the pore structure of the IL-treated porous HAp green body were successfully observed even in hydrated condition without any charging using field emission scanning electron microscope (FE-SEM). Results showed that the pore diameter from 300 to 600 μm in as-prepared green body was reduced to 100–300 μm in the sample sintered at 1000 °C. Raman results showed that the IL forms weak hydrogen bond with water molecules within the sample and, that prevents from drying in vacuum condition. In addition, the IL acts as a conducting media for HAp ceramics to be observed under FE-SEM.     

Studies on mechanical and thermal properties of ternary blends of polyethylenes. I

Six film samples of varying compositions of linear low‐density polyethylene (LLDPE), 10–35 wt %, and high‐density polyethylene (HDPE), 40–65 wt %, having a fixed percentage of low‐density polyethylene (LDPE) at 25 wt % were extruded by melt blending in a single‐screw extruder (L/D ratio = 20 : 1) of uniform thickness of 2 mil. The tensile strength, elongation at break, and impact strength were found to increase up to 60 wt % HDPE addition, starting from 40 wt % HDPE, in the blends and then decreased. The blend sample B‐500 was found to be more thermally stable than its counterparts. The appearance of a single peak beyond 45 wt % HDPE content in the blend in dynamic DSC scans showed the formation of miscible blend systems and this was further confirmed by scanning electron microscopic analysis. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1691–1698, 2005     

Bioprocess Scale-up for Acetohydroxamic Acid Production by Hyperactive Acyltransferase of Immobilized Rhodococcus Pyridinivorans

Catalysis Letters - In this study, Rhodococcus pyridinivorans cells containing hyperactive acyltransferase was immobilized on various macromolecules based-polymeric matrices and used to improve...     

Slurry Erosive Wear Evaluation of HVOF-Spray Cr2O3 Coating on Some Turbine Steels

In this study, Cr₂O₃ coatings were deposited on CF8M and CA6NM turbine steels by high-velocity oxy-fuel (HVOF)-spray process and analyzed with regard to their performance under slurry erosion conditions. High Speed Erosion Test Rig was used for slurry erosion tests, and the effects of three parameters, namely, average particle size, speed (rpm), and slurry concentration on slurry erosion of these materials were investigated. SEM micrographs on the surface of samples, before and after slurry erosion tests, were taken to study the erosion mechanism. For the uncoated steels, CA6NM steel showed better erosion resistance in comparison with CF8M steel. The HVOF-sprayed Cr₂O₃-coated CF8M and CA6NM steels showed better slurry erosion resistance in comparison with their uncoated counterparts. It may be due to the higher hardness as a result of HVOF-sprayed Cr₂O₃ coating in comparison with the uncoated CF8M and CA6NM steels.     

Dynamic variable depth of cut machining using piezoelectric actuators

This paper describes the design of a piezoelectric actuated cutting tool and implementation of digital servo controls for machining surfaces with dynamically varying depth of cut. Through a flexure hinge, the tool holder could generate 50 μm travel at the tip of the cutting insert. Tool motion errors of less than 0.5 μm were achieved in tracking cyclic waveforms by employing a digital repetitive servo control. When applied to turning aluminum and steel workpieces with variable depth of cut using carbide tools, less than 5 μm machined surface errors were measured.     

Osmium(VIII)/Ruthenium(III) Catalysed Oxidation of l-lysine by Diperiodatocuprate(III) in Aqueous Alkaline Medium: A Comparative Mechanistic Approach by Stopped Flow Technique

Abstract The kinetics of osmium(VIII) and ruthenium(III) catalysed oxidation of l-lysine (l-lys) by diperiodatocuprate(III) (DPC) in alkaline medium at a constant ionic strength of 0.15 mol dm⁻³ was studied spectrophotometrically. The reaction between l-lys and DPC in alkaline medium exhibits 1:2 stoichiometry in both catalysed reaction (l-lys: DPC). The reaction is first order in [DPC] and has less than unit order both in [l-lys] and [alkali]. Increase in periodate concentration decreases the rate. Intervention of free radicals was observed in the reaction. The main products were identified by spot test, IR and GC-MS studies. Probable mechanisms are proposed and discussed. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to the slow step of the mechanism are computed and discussed and thermodynamic quantities are also determined. It has been observed that the catalytic efficiency for the present reaction is in the order of Os(VIII) > Ru(III). The active species of catalyst and oxidant have been identified. Graphical Abstract The kinetic and mechanistic investigations of the reaction between DPC and l-lysine has been studied in presence of microamounts of ruthenium(III) and osmium(VIII) in alkaline medium. The monoperiodatoargentate(III), [Ru(H₂O)₅OH]²⁺ and [OsO₄(OH)₂]²⁻ are considered as the active species of oxidant, DPC, ruthenium(III) and osmium(VIII) respectively.      

Nanoenergetic Composites of CuO Nanorods,Nanowires, and Al‐Nanoparticles

This paper reports on the synthesis of the nanoenergetic composites containing CuO nanorods and nanowires, and Al‐nanoparticles. Nanorods and nanowires were synthesized using poly(ethylene glycol) templating method and combined with Al‐nanoparticles using ultrasonic mixing and self‐assembly methods. Poly(4‐vinylpyridine) was used for the self‐assembly of Al‐nanoparticles around the nanorods. At the optimized values of equivalence ratio, sonication time, and Al‐particle size, the combustion wave speed of 1650 m s⁻¹ was obtained for the nanorods‐based energetics. For the composite of nanowires and Al‐nanoparticles the speed was increased to 1900 m s⁻¹. The maximum combustion wave speed of 2400 m s⁻¹ was achieved for the self‐assembled composite, which is the highest known so far among the nanoenergetic materials. It is possible that in the self‐assembled composites, the interfacial contact between the oxidizer and fuel is higher and resistance to overall diffusional process is lower, thus enhancing the performance.     

Structural drivers controlling sulfur solubility in alkali aluminoborosilicate glasses

If the direct feed approach to vitrify the Hanford's tank waste is implemented, the low activity waste (LAW) will comprise higher concentrations of alkali/alkaline-earth sulfates than expected under the previously proposed vitrification scheme. To ensure a minimal impact of higher sulfate concentrations on the downstream operations and overall cost of vitrification, advanced glass formulations with enhanced sulfate loadings (solubility) are needed. While, the current sulfate solubility predictive models have been successful in designing LAW glasses with sulfate loadings <2 wt.%, it will be difficult for them to design glass compositions with enhanced loadings due to our limited understanding of the fundamental science governing these processes. In this pursuit, this article unearths the underlying compositional and structural drivers controlling the sulfate solubility in model LAW glasses. It has been shown that the preferentially removes non-framework cations from the modifier sites in the silicate network, thus, leading to the polymerization in the glass network via the formation of ring-structured borosilicate units. Furthermore, though the sulfate solubility slightly decreases with increasing Li⁺/Na⁺ in the glasses, the prefers to be charge compensated by Na⁺, as it is easier for to break Na–O bonds instead of Li–O bonds.     

Use of radial forces for fault detection in tapping

A model-based method for fault detection in tapping based on torque and radial forces is proposed. The method allows the identification of faults typical of a tapping operation including axial misalignment, tap runout, tooth breakage both singly and together. The validation experiments have been run on aluminum 356 workpieces for different combinations of process faults. Results have shown that the model predictions are in good agreement with the experimental radial force and torque signals under various fault conditions.