Characterizing 3D vegetation structure from space: Mission requirements

Human and natural forces are rapidly modifying the global distribution and structure of terrestrial ecosystems on which all of life depends, altering the global carbon cycle, affecting our climate now and for the foreseeable future, causing steep reductions in species diversity, and endangering Earth's sustainability.To understand changes and trends in terrestrial ecosystems and their functioning as carbon sources and sinks, and to characterize the impact of their changes on climate, habitat and biodiversity, new space assets are urgently needed to produce high spatial resolution global maps of the three-dimensional (3D) structure of vegetation, its biomass above ground, the carbon stored within and the implications for atmospheric green house gas concentrations and climate. These needs were articulated in a 2007 National Research Council (NRC) report (NRC, 2007) recommending a new satellite mission, DESDynI, carrying an L-band Polarized Synthetic Aperture Radar (Pol-SAR) and a multi-beam lidar (Light RAnging And Detection) operating at 1064 nm. The objectives of this paper are to articulate the importance of these new, multi-year, 3D vegetation structure and biomass measurements, to briefly review the feasibility of radar and lidar remote sensing technology to meet these requirements, to define the data products and measurement requirements, and to consider implications of mission durations. The paper addresses these objectives by synthesizing research results and other input from a broad community of terrestrial ecology, carbon cycle, and remote sensing scientists and working groups. We conclude that:

(1)

Current global biomass and 3-D vegetation structure information is unsuitable for both science and management and policy. The only existing global datasets of biomass are approximations based on combining land cover type and representative carbon values, instead of measurements of actual biomass. Current measurement attempts based on radar and multispectral data have low explanatory power outside low biomass areas. There is no current capability for repeatable disturbance and regrowth estimates.

(2)

The science and policy needs for information on vegetation 3D structure can be successfully addressed by a mission capable of producing (i) a first global inventory of forest biomass with a spatial resolution 1 km or finer and unprecedented accuracy (ii) annual global disturbance maps at a spatial resolution of 1 ha with subsequent biomass accumulation rates at resolutions of 1 km or finer, and (iii) transects of vertical and horizontal forest structure with 30 m along-transect measurements globally at 25 m spatial resolution, essential for habitat characterization.

We also show from the literature that lidar profile samples together with wall-to-wall L-band quad-pol-SAR imagery and ecosystem dynamics models can work together to satisfy these vegetation 3D structure and biomass measurement requirements. Finally we argue that the technology readiness levels of combined pol-SAR and lidar instruments are adequate for space flight. Remaining to be worked out, are the particulars of a lidar/pol-SAR mission design that is feasible and at a minimum satisfies the information and measurement requirement articulated herein.     

Fovea center detection based on the retina anatomy and mathematical morphology

In this work, we present a new fovea center detection method for color eye fundus images. This method is based on known anatomical constraints on the relative locations of retina structures, and mathematical morphology. The detection of this anatomical feature is a prerequisite for the computer aided diagnosis of several retinal diseases, such as Diabetic Macular Edema. The proposed method is adaptive to local illumination changes, and it is robust to local disturbances introduced by pathologies in digital color eye fundus images (e.g. exudates). Our experimental results using the DRIVE image database indicate that our method is able to detect the fovea center in 37 out of 37 images (i.e. with a success rate of 100%). Using the DIARETDB1 database, our method was able to detect the fovea center in 92.13% of all tested cases (i.e. in 82 out of 89 images). These results indicate that our approach potentially can achieve a better performance than comparable methods proposed in the literature.     

Staged self-assembly: nanomanufacture of arbitrary shapes with <Emphasis Type="Italic">O</Emphasis>(1) glues

We introduce staged self-assembly of Wang tiles, where tiles can be added dynamically in sequence and where intermediate constructions can be stored for later mixing. This model and its various constraints and performance measures are motivated by a practical nanofabrication scenario through protein-based bioengineering. Staging allows us to break through the traditional lower bounds in tile self-assembly by encoding the shape in the staging algorithm instead of the tiles. All of our results are based on the practical assumption that only a constant number of glues, and thus only a constant number of tiles, can be engineered. Under this assumption, traditional tile self-assembly cannot even manufacture an n × n square; in contrast, we show how staged assembly in theory enables manufacture of arbitrary shapes in a variety of precise formulations of the model.

A Secure Grid Medical Data Manager Interfaced to the gLite Middleware

The medical community is producing and manipulating a tremendous volume of digital data for which computerized archiving, processing and analysis is needed. Grid infrastructures are promising for dealing with challenges arising in computerized medicine but the manipulation of medical data on such infrastructures faces both the problem of interconnecting medical information systems to Grid middlewares and of preserving patients’ privacy in a wide and distributed multi-user system. These constraints are often limiting the use of Grids for manipulating sensitive medical data. This paper describes our design of a medical data management system taking advantage of the advanced gLite data management services, developed in the context of the EGEE project, to fulfill the stringent needs of the medical community. It ensures medical data protection through strict data access control, anonymization and encryption. The multi-level access control provides the flexibility needed for implementing complex medical use-cases. Data anonymization prevents the exposure of most sensitive data to unauthorized users, and data encryption guarantees data protection even when it is stored at remote sites. Moreover, the developed prototype provides a Grid storage resource manager (SRM) interface to standard medical DICOM servers thereby enabling transparent access to medical data without interfering with medical practice.     

Stability ball versus office chair: comparison of muscle activation and lumbar spine posture during prolonged sitting

OBJECTIVE: The objective of the study was to evaluate the differences between sitting on a stability ball and in an office chair in terms of trunk muscle activation and lumbar spine posture. BACKGROUND: Stability balls have become increasingly popular as an alternative to office chairs to help reduce the prevalence of low back pain; however, little research has been conducted on their use as office chairs. METHODS: The 14 participants (7 men, 7 women) were required to sit on both a stability ball and an office chair for 1 hour each while performing various computer workstation tasks throughout the sitting periods. The activation of eight muscles and lumbar spine posture were measured and analyzed. RESULTS: Increased muscle activation in thoracic erector spinae (p = .0352), decreased pelvic tilt (p = .0114), and increased perceived discomfort (p < .0001) while sitting on the stability ball were observed. CONCLUSIONS: The small changes in biological responses when sitting on a stability ball as compared with an office chair, combined with the increased reported discomfort while on the ball, suggests its use for prolonged sitting may not be advantageous. APPLICATION: Prolonged sitting on a stability ball does not greatly alter the manner in which an individual sits, yet it appears to increase the level of discomfort. Therefore, it is important to fully explore a new chair design and consult scientific research before implementing its use.     

Psychotherapy with high-achieving adolescent girls.

The "overnurtured child" is the label applied to adolescent girls whose strong mother-identification and oedipal attachment to father may be associated with a variety of achievement-related conflicts following puberty. Symptoms include anxiety, depression, vague feelings of inadequacy, loneliness, and isolation from peers. These patients suffer from a form of identity diffusion in which pressures to continue achieving at their present rate of excellence collide with pressures to be more "feminine," social, and affiliative. Therapy is conceptualized as a kind of resocialization process aimed at facilitating separation from family and the development of an independent identity. In treatment, the therapist plays a variety of interrelated roles such as role model, family counselor, and teacher. (17 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Engineering better wheelchairs to enhance community participation.

With about 2.2 million Americans currently using wheeled mobility devices, wheelchairs are frequently provided to people with impaired mobility to provide accessibility to the community. Individuals with spinal cord injuries, arthritis, balance disorders, and other conditions or diseases are typical users of wheelchairs. However, secondary injuries and wheelchair-related accidents are risks introduced by wheelchairs. Research is underway to advance wheelchair design to prevent or accommodate secondary injuries related to propulsion and transfer biomechanics, while improving safe, functional performance and accessibility to the community. This paper summarizes research and development underway aimed at enhancing safety and optimizing wheelchair design.     

Psychology at the Intersection of Work and Family: Recommendations for Employers, Working Families, and Policymakers.

Demographic data show that major changes have been occurring in the everyday lives of families over the last generation, with the majority of mothers of young children in the workforce and an increasing number of men and women assuming caregiving responsibilities for older relatives. Thus, the 2 primary identities of most adults, defined by their multiple family and work roles, need to be coordinated in ways that promote positive family outcomes, returns on investments for employers, and societal values. Despite changes in the workforce, the world of work is still largely organized for a family model that is increasingly rare--one with a stay-at-home caregiver. Recommendations based on psychological and other social science research are offered to align the needs of working families and employers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Effectiveness of Early Head Start for 3-Year-Old Children and Their Parents: Lessons for Policy and Programs.

Early Head Start, a federal program begun in 1995 for low-income pregnant women and families with infants and toddlers, was evaluated through a randomized trial of 3,001 families in 17 programs. Interviews with primary caregivers, child assessments, and observations of parent-child interactions were completed when children were 3 years old. Caregivers were diverse in race-ethnicity, language, and other characteristics. Regression-adjusted impact analyses showed that 3-year-old program children performed better than did control children in cognitive and language development, displayed higher emotional engagement of the parent and sustained attention with play objects, and were lower in aggressive behavior. Compared with controls, Early Head Start parents were more emotionally supportive, provided more language and learning stimulation, read to their children more, and spanked less. The strongest and most numerous impacts were for programs that offered a mix of home-visiting and center-based services and that fully implemented the performance standards early. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Look Here but Ignore What You See: Effects of Distractors at Fixation.

Distractor interference effects were compared between distractors in the periphery and those placed at fixation. In 6 experiments, the authors show that fixation distractors produce larger interference effects than peripheral distractors. However, the fixation distractor effects are modulated by perceptual load to the same extent as are peripheral distractor effects (Experiments 1 and 2). Experiment 3 showed that fixation distractors are harder to filter out than peripheral distractors. The larger distractor effects at fixation are not due to the cortical magnification of foveal stimuli (Experiments 4 and 5), nor can they be attributed to cuing by the fixation point (Experiment 2), the lower predictability or greater location certainty of fixation distractors (Experiment 5), or their being in a central position (Experiment 6). The authors suggest that preferential access to attention renders fixation distractors harder to ignore than peripheral distractors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)