Growth and characterization of non-c-axis-oriented SrBi2Ta2O9 epitaxial thin films on Si(100) substrates with SrRuO3 bottom electrodes

Abstract

We have successfully grown non-c-axis-oriented epitaxial ferroelectric SrBi₂Ta₂O₉ (SBT) films with (116) and (103) orientations on Si(100) substrates using epitaxial (110)- and (111)-oriented SrRuO₃ (SRO) bottom electrodes, respectively. The SRO orientations have been induced by coating the Si(100) substrates with epitaxial YSZ(100) and MgO(111)/ YSZ(100) buffer layers, respectively. All films were sequentially grown by pulsed laser deposition. Specific in-plane orientations of the epitaxial SBT films were found, which are in turn determined by specific in-plane orientations of the epitaxial SRO bottom electrodes. These include a diagonal rectangle-on-cube epitaxy of SRO(110) on YSZ(100) and a triangle-on-triangle epitaxy of SRO(111) on MgO(111).     

Ein neues Verfahren zur Berechnung des räumlichen passiven Erddrucks vor Trägern

A calculation method for the spatial passive earth pressure acting on girders. This paper presents a calculation method for vertical girders in cohesionsless soils. Measurements on buildings and model experiments are the basis. The Distinct Element Method (DEM) was extended and improved to enable the numerical simulation of load tests. Based on this knowledge, conditions not covered by experiments was simulated by means of the DEM. Accordingly, the test matrix could be extended. With the results of these simulations a new calculation method was derived.     

Chloride and Indium‐Chloride‐Complex Inorganic Ligands for Efficient Stabilization of Nanocrystals in Solution and Doping of Nanocrystal Solids

Here, the surface functionalization of CdSe and CdSe/CdS core/shell nanocrystals (NCs) with compact chloride and indium‐chloride‐complex ligands is reported. The ligands provide not only short interparticle distances but additionally control doping and passivation of surface trap states, leading to enhanced electronic coupling in NC‐based arrays. The solids based on these NCs show an excellent electronic transport behavior after heat treatment at the relatively low temperature of 190 °C. Indeed, the indium‐chlorido‐capped 4.5 nm CdSe NC based thin‐film field‐effect transistor reaches a saturation mobility of μ = 4.1 cm² (V s)^?1 accompanied by a low hysteresis, while retaining the typical features of strongly quantum confined semiconductor NCs. The capping with chloride ions preserves the high photoluminescence quantum yield ( ≈ 66%) of CdSe/CdS core/shell NCs even when the CdS shell is relatively thin (six monolayers). The simplicity of the chemical incorporation of chlorine and indium species via solution ligand exchange, the efficient electronic passivation of the NC surface, as well as their high stability as dispersions make these materials especially attractive for wide‐area solution‐processable fabrication of NC‐based devices.     

Morphology, optical, and photoelectrochemical properties of electrodeposited nanocrystalline ZnO films sensitized with Cd x Zn1−x S nanoparticles

Nanocrystalline ITO/ZnO films formed by porous zinc oxide microplatelets 1–3 μm in size and 100–200 nm in thickness, which consist of 30–50 nm ZnO crystallites, were sensitized to visible light by Cd _x Zn_1?x S nanocrystals deposited using the method of successive ionic layer adsorption and reaction (SILAR). The composition of Cd _x Zn_1?x S nanocrystals as well as the dependence between molar Cd(II) fraction in the films and the ratio of cadmium and zinc nitrate concentrations in solutions used for the SILAR procedure were determined by a combination of electron, Raman, and energy-dispersive X-ray spectroscopies. The photovoltage observed at illumination of the ITO/ZnO/Cd _x Zn_1?x S heterostructures by white light (λ >400 nm) in aqueous Na₂S solution increases with a decrease of Cd(II) content proportionally to an increment in the conduction band potential of the Cd _x Zn_1?x S nanocrystals. The photocurrent density normalized to the light absorbance of the ITO/ZnO/Cd _x Zn_1?x S films increases by a factor of around four when the conduction band potential of Cd _x Zn_1?x S nanocrystals grows by 220 mV as a result of Cd(II) fraction changing from 1.0 to 0.62–0.67. The results show that Cd _x Zn_1?x S solid solutions are more advantageous sensitizers for the short-wavelength part of the sensitivity window of the liquid-junction solar cells (400–450 nm) than conventionally used cadmium sulfide.     

Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions

Mechanical behavior of multi-phase composites is crucially influenced by volume fractions, orientation distributions and geometries of microconstituents. In the case of carbon–carbon composites manufactured by chemical vapor infiltration, the microconstituents are carbon fibers, pyrolytic carbon matrix, and pores. The local variable thickness of the pyrolytic carbon coating, distribution of the fibers and porosity are the main factors influencing the properties of these materials. Two types of fiber arrangements are considered in this paper: 2D laminated preform and random felt. The materials are characterized by determining their densities and their fiber distribution functions, by establishing types of pyrolytic carbon matrix present in the composites, and by studying the porosity. A technique utilizing X-ray computed tomography for estimation of the orientation distribution of the fibers and pores with arbitrary shapes is developed. A methodology based on the processing of microstructure images with subsequent numerical simulation of the coating growth around the fibers is proposed for estimation of the local thickness of the coating. The obtained information is appropriate for micromechanical modeling and prediction of the overall thermo-mechanical properties of the studied composites.     

合作型的全球城市——德国城市体系研究及其对上海的启示

与美国,英国和日本不同,德国作为世界上最重要的经济体之一,并没有一个顶级的全球城市.对德国城市体系的分析显示,德国拥有一个由多个重要城市构成的城市体系网络,城市间存在良好的劳动分工和专业化协作,且具有高度的交通可达性.这种城市体系结构加强了区域之间的竞争,有利于发现更好的问题解决方法,而且与单一的全球城市相比具有较低的拥堵成本.这种城市体系并没有影响甚至是强化了德国企业在世界高端产品生产上的优势地位,德国企业也并没有因缺少单一的全球城市而丧失了全球经济的控制权.因而,从成效出发,德国城市系统可以被看作是一个合作型的全球城市.这样的经验为上海建设国际经济、金融、贸易和航运中心提供了新思路,未来的国际经济中心城市应该突破上海行政界限,定位为长三角地区合作共建的全球城市.为此,长三角城市间要合理分工和专业化协作,以市场机制为根本实现路径,并进一步提高城市间的交通可达性.     

In-depth material characterization of polyhydroxybutyrate from a forest biorefinery

Large-scale replacement of petroplastics with compostable plastics, like polyhydroxybutyrates (PHB) will contribute to elimination plastic pollution, decrease greenhouse gas emissions, and valorize local biomass resources. Lignocellulose hydrolysates have emerged as potentially sustainable carbon sources for PHB production. For industrial processing, it is necessary to know the polymer properties. Yet, most studies on PHB samples from lignocellulose report few material properties. PHB samples produced from a pilot scale hardwood holocellulose hydrolysate conversion process were characterized and compared with PHB from a sugar hydrolysate and a commercial PHB powder. PHB from hardwood holocellulose hydrolysate was found to be comparable with commercial PHB in all properties. Differential scanning calorimetry and thermal gravimetric analysis showed that all samples had similar thermal behavior, where the melting temperature was 176°C and the decomposition temperature was 293°C. From the melting enthalpy, all samples showed 63% crystallinity. Dynamic mechanical analysis showed a glass transition temperature at 5°C and a crystallization temperature of 57°C. Fourier transform infrared spectroscopy and nuclear magnetic resonance confirmed that the samples were homopolymers comprised of hydroxybutyrate units. The difference among the samples was the number average molecular mass, being lower for wood hydrolysate (246.4 kDa) than sugar hydrolysate (670.3 kDa).