A computer model for the design of window shading devices

An efficient way of determining some of the glazing related variables is described, thus enabling thermal performance to be considered easily at the early design stage when inexpensive measures of heating and cooling can be advocated and tested.     

An evaluation technique for vibration modes of structures interacting with soil

In this paper the natural frequencies and modal shapes of a structure interacting with soil and modelled as a cantilever non-prismatic beam on which concentrated masses are applied have been evaluated through the application of the Rayleigh-Ritz method.

On the basis of this general formulation a numerical program was developed; subsequently some simple expressions allowing a good evaluation of the fundamental frequency were derived.

In conclusion some numerical examples are also presented in order to illustrate the reliability of the proposed methodology.     

Possible production of ceramic tiles from marine dredging spoils alone and mixed with other waste materials

Dredging spoils, due to their composition could be considered a new potential source for the production of monolithic ceramics. Nevertheless, abundance of coloured oxides in these materials preclude the possibility of obtaining white products, but not that of producing ceramics with a good mechanical behaviour. As goal of the present research we have produced and studied samples using not only dredging spoils alone, but also mixtures with other waste materials such as bottom ashes from an incinerator of municipal solid waste, incinerated seawage sludge from a municipal seawage treatment plant and steelworks slag. Blending of different components was done by attrition milling. Powders were pressed into specimens which were air sintered in a muffle furnace and their shrinkage on firing was determined. Water absorption, density, strength, hardness, fracture toughness, thermal expansion coefficient of the fired bodies were measured; XRD and SEM images were also examined. The fired samples were finally tested in acidic environment in order to evaluate their elution behaviour and consequently their environmental compatibility. It is observed that, although the shrinkage on firing is too high for the production of tiles, in all the compositions studied the sintering procedure leads to fine microstructures, good mechanical properties and to a limitation of the release of many of the most hazardous metals contained in the starting powders.     

Time-harmonic analysis of grounding system in horizontally stratified multilayer medium

This paper extends an electromagnetic model for time-harmonic analysis of grounding system in horizontally stratified multilayer medium which consists of air and arbitrary number of soil layers. Complete electromagnetic coupling between grounding system segments is taken into account. The model is based on applying the finite element technique to an integral equation formulation. Through an effective approximation of the attenuation and phase shift effects the computation of Sommerfeld integrals has been avoided, which considerably shortens the computational time. The treatment of non-horizontal segments of grounding grid conductors has been resolved by approximating the segment with five current point sources distributed along the segment length. An algorithm for scalar electric potential computation in any soil layers is presented and compared to published results. The effects of approximating a complex heterogeneous earth structure with a homogeneous earth is also analyzed and discussed.     

Photon Upconversion Hydrogels for 3D Optogenetics

The ability to optically induce biological responses in 3D has been dwarfed by the physical limitations of visible light penetration to trigger photochemical processes. However, many biological systems are relatively transparent to low-energy light, which does not provide sufficient energy to induce photochemistry in 3D. To overcome this challenge, hydrogels that are capable of converting red or near-IR (NIR) light into blue light within the cell-laden 3D scaffolds are developed. The upconverted light can then excite optically active proteins in cells to trigger a photochemical response. The hydrogels operate by triplet–triplet annihilation upconversion. As proof-of-principle, it is found that the hydrogels trigger an optogenetic response by red/NIR irradiation of HeLa cells that have been engineered to express the blue-light sensitive protein Cry2olig. While it is remarkable to photoinduce the clustering of Cry2olig with blanket NIR irradiation in 3D, it is also demonstrated how the hydrogels trigger clustering within a single cell with great specificity and spatiotemporal control. In principle, these hydrogels may allow for photochemical control of cell function within 3D scaffolds, which can lead to a wealth of fundamental studies and biochemical applications.     

Facile preparation of glycine-based mesoporous graphitic carbons with embedded cobalt nanoparticles

Journal of Materials Science - A simple route has been developed for the preparation of mesoporous graphitic carbons with embedded cobalt nanoparticles just using glycine as a nitrogen source,...     

The Use of Macros in Atomic Force Microscopy Image Analysis and Image Processing

The public domain image analysis program NIH Image (http://rsb.info.nih.gov/nih-image) has been modified and extended to produce Image SXM (http://reg.ssci.liv.ac.uk), a program that supports many of the image file formats used by various scanning probe microscope manufacturers. This article discusses the different approaches to software customization and describes the use of two sets of macros in the analysis and processing of atomic force microscopy images.     

A 3D Magnetic Hyaluronic Acid Hydrogel for Magnetomechanical Neuromodulation of Primary Dorsal Root Ganglion Neurons

Neuromodulation tools are useful to decipher and modulate neural circuitries implicated in functions and diseases. Existing electrical and chemical tools cannot offer specific neural modulation while optogenetics has limitations for deep tissue interfaces, which might be overcome by miniaturized optoelectronic devices in the future. Here, a 3D magnetic hyaluronic hydrogel is described that offers noninvasive neuromodulation via magnetomechanical stimulation of primary dorsal root ganglion (DRG) neurons. The hydrogel shares similar biochemical and biophysical properties as the extracellular matrix of spinal cord, facilitating healthy growth of functional neurites and expression of excitatory and inhibitory ion channels. By testing with different neurotoxins, and micropillar substrate deflections with electrophysical recordings, it is found that acute magnetomechanical stimulation induces calcium influx in DRG neurons primarily via endogenous, mechanosensitive TRPV4 and PIEZO2 channels. Next, capitalizing on the receptor adaptation characteristic of DRG neurons, chronic magnetomechanical stimulation is performed and found that it reduces the expression of PIEZO2 channels, which can be useful for modulating pain where mechanosensitive channels are typically overexpressed. A general strategy is thus offered for neuroscientists and material scientists to fabricate 3D magnetic biomaterials tailored to different types of excitable cells for remote magnetomechanical modulation.     

Polymorphism in Sr3Fe2O7−x

The compound Sr₃Fe₂O_7–x , with variable iron valence, was investigated by X-ray powder techniques, both at room and at high temperatures. If the material is examined in massive form, a single phase called -Sr₃Fe₂O_7–x appears as previously reported in the literature. This -phase is tetragonal and exhibits the lattice parameters: a=3.874 and c=40.314 Å. Two other phases, called and -Sr₃Fe₂O_7–x , respectively, can be obtained on heating the finely powdered material when laid on a flat platinum support. The form is stable up to 1275° C, while the form is revealed only above 1275° C and changes always into -Sr₃Fe₂O_7–x when quenched. Both and phases are tetragonal, with a=4.001 and c= 58.251 for the form and a=4.013, c=57.092 Å for the form. The transition involves a true phase equilibrium, while the transformation is possible only by means of a suitable mechanical treatment of the material.