Functional Group Effects of New Calixarene Derivatives on Catalytic and Enantioselective Behavior of Lipase

ABSTRACT

In this study, two new calixarene derivatives bearing thiourea and carbamate moieties were synthesized and characterized. Moreover, thiourea- and carbamate-bridged calixarene derivatives with Fe₃O₄ magnetic nanoparticle were employed for the first time as the convenient additives in the encapsulation process of lipase. The results of catalytic activity and enantioselectivity of the encapsulated lipases in the hydrolysis reaction of racemic flurbiprofen methyl ester indicate that both of the encapsulated lipases (Enc-TuC[4]@Fe₃O₄ and Enc-CbC[4]@Fe₃O₄) exhibit higher conversion and enantioselectivity compared to the free-encapsulated lipase (Enc-Lipase). However, the highest affinities result was obtained when the encapsulated lipase (Enc-CbC[4]@Fe₃O₄) was used in the kinetic resolution reaction of racemic flurbiprofen methyl ester.     

Effects of Different Denture Cleansers on the Tensile Bond Strength of Denture Liners

The effect of two denture cleansers (Polident® and Protefix®) on the tensile bond strength between four soft liner materials (Molloplast B®, Permaflex®, Sofreliner Tough Medium®, and GC Reline Soft®) and a conventional denture base resin was investigated. For each of the liner materials 35 test specimens were prepared according to test the requirements and assigned into seven groups (n = 5). Before tensile testing, five of the liner specimens were kept in water or soaked in two cleansing solutions during 2 and 7 d. Five other samples served as a control group subjected directly to tensile testing. The bond strength values were obtained using a universal testing machine and compared statistically. The type of failure was assessed visually. No significant difference was found between the groups for the tested conditions used (p > 0.05). The most frequent failure mode was cohesive for Molloplast and Permaflex specimens, adhesive for Sofreliner Tough Medium, and a mixed type of failure was observed for GC Reline Soft material.     

The Effect of Surface Treatments on Tensile Bond Strength between a Silicone Soft Liner and a Heat-Cured Denture Base Resin

This study evaluated tensile bond strength of a denture soft lining material to a poly (methylmethacrylate) (PMMA) denture base resin subjected to different surface treatment modalities and thermocycling. The materials tested were a silicone-based liner, Molloplast B®, and a heat-cured denture base resin, Meliodent^TM. The denture soft lining material was packed against cured PMMA base resin, which was smoothed; sandblasted with 250-μm Al₂O₃ particles; or lased with a KTP laser; or against uncured PMMA dough (n = 10). In each group, five specimens were thermocycled in a water bath (5–55°C; 3000 cycles) before testing, whereas the other five were directly tested after 24 h. A tensile test was performed using a universal testing machine. Data showed that different treatment modalities of resin surfaces affected adhesion between these two materials and the highest bond values were recorded for cured/smoothed samples under each condition tested. Thermocycling of specimens had no significant reducing effect on measured bond strength values.     

Impedance Analysis of Dielectric Nanoparticles Enabled via a Self‐Assembled Monolayer

Impedance spectroscopy has been shown to be a powerful tool to investigate the dielectric characteristics of powders suspended in suitable liquids. The electrical and dielectrical contributions of different components of the slurry can be extracted from the impedance spectra through measurement of frequency‐dependent relaxations. However, for ferroelectric powders that possess innate surface conductivity, such as BaTiO₃, nanoparticles have sufficient conductivity to exclude low‐frequency fields that preclude impedance characterization of the particle core. In this work, the slurry technique is shown to be effective for dielectric characterization of not only micrometer‐sized particles through equivalent circuit modeling but also applicable to nanometer size dielectric particles upon remediating the conductive surface defect. Application of a self‐assembled monolayer (SAM) onto the nanoparticle as a surface passivation layer reduces the surface conductivity, stabilizes the nanoparticles to dissolution, and allows a reproducible measurement and modeling of the nanoparticle dielectric characteristics including nanoparticle permittivity. The dielectric permittivity of surface passivated, ~40 nm diameter barium titanate particles was measured to be ε_r ~ 135.     

Fire retardant properties of intumescent polypropylene composites filled with calcium carbonate

This study was aimed to investigate the influence of calcium carbonate (CaCO₃), a widely used filler, on the fire retardancy of intumescent polypropylene composites. Two intumescent systems based on (1) mixture of ammonium polyphosphate (APP) and pentaerythritol and (2) surface‐modified APP (m‐APP) were examined. In terms of steady heat release rate, total heat evolved, and fire growth index determined by mass loss calorimetry, m‐APP performed markedly superior to APP‐pentaerythritol. The presence of CaCO₃ in both intumescent formulations caused significant losses in fire retardant performance assessed by mass loss calorimetry, limiting oxygen index and UL‐94 tests. Peak rates of heat release and mass loss during combustion, and total heat evolved on combustion were increased, whereas time to ignition was decreased. Characterization of fire residues ascribed the mechanism of deterioration in fire retardancy to the formation of porous and nonexpanded crystalline calcium phosphate/CaCO₃ residues during combustion rather than the amorphous protective intumescent chars formed in the absence of CaCO₃. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Preparation and characterization of palladium-plated porous glass for hydrogen enrichment

In this study, cylindrical porous glass tablets were plated by palladium using electroless plating technique. Hypophosphite and Co(II) complexes were used as reducing agents in the prepared plating baths. Experiments were carried out in an especially designed glass vessel in which helium gas was continuously bubbled through the solution to create uniform concentration and to remove hydrogen gas from the surface for the case of hypophosphite-based procedure. XRF analysis of the upper layer of the composite membrane prepared by the hypophosphite-based bath showed a Pd/Si ratio of 4.6. SEM photographs indicated impregnation of Pd into the substrate upto 200 μm. However, the thickness of the dense Pd layer was only about 15 μm. SEM photographs and XRF results showed that hypophosphite-based bath was much more successful than the Co(II) complex-bath in Pd plating. Permeation experiments carried out at different temperatures showed that the contribution of surface diffusion to the permeation was significant at low temperatures and solution–diffusion mechanism was not important in the 40–200 °C temperature range for these membranes. The selectivity ratio for H₂/N₂ was found to be about 7 at 200 °C.     

Improved discrimination of soft and hard white wheat using SKCS and imaging parameters

Natural variation of hardness of wheat kernels often results in overlapping hardness indices (HI) distributions between hard and soft classes as measured with the single kernel characterization system (SKCS). This is particularly true for the case of the hard white (HW) and soft white (SW) wheat classes. To address this problem, a color camera was incorporated into the SKCS system so that color and kernel size data could be combined with SKCS measurements for classification purposes. Samples of hard red (HR), soft red (SR), HW, and SW wheat were classified using the SKCS system with and without the camera and results compared. Using the camera system, errors for separating HW from SW classes were reduced to less than 5%, as compared to 17.1% using SKCS alone. Furthermore, improved data processing applied to the low-level data currently produced by the SKCS system led to greater than 50% reduction in classification errors between SW and HR as compared to using HI data alone. Similar improvements in classification accuracies for 300-kernel sample containing mixtures of SW and HW were also achieved. The 300 kernel sample classification is usually what inspectors and grain traders use to determine sample purity rather than individual kernel results. The techniques developed should aid grain inspectors in properly identifying mixtures of these two classes. Unfortunately, for the SR and HR classes, incorporating the camera data decreased classification accuracy while increasing the complexity of the system. However, SR and HR classes can be adequately distinguished with the SKCS in its current form. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Trace metal content in nine species of fish from the Black and Aegean Seas,Turkey

Trace metal content of nine fish species harvested from the Black and Aegean Seas were determined by microwave digestion and atomic absorption spectroscopy (MD–AAS). Verification of the MD–AAS method was demonstrated by analysis of standard reference material (NRCC-DORM-2 dogfish muscle). Trace metal content in fish samples were 0.73–1.83 μg/g for copper, 0.45–0.90 μg/g for cadmium, 0.33–0.93 μg/g for lead, 35.4–106 μg/g for zinc, 1.28–7.40 μg/g for manganese, 68.6–163 μg/g for iron, 0.95–1.98 μg/g for chromium, and 1.92–5.68 μg/g for nickel. The levels of lead and cadmium in fish samples were higher than the recommended legal limits for human consumption.