DESCRIPTION AND ANALYSIS OF TIMBER DRYING KINETICS

In this paper an experimental and semi-analytical technique is described that provides a method of estimating a macroscopic drying kinetics curve and internal moisture content profiles is described. Moisture gradients and the time evolution of these gradients are analysed as a function of the air drying parameters (dry-bulb, wet-bulb temperature and the velocity) and the product parameters (thickness and density). The material used as an illustration is a maritime-pine-wood.     

A fuzzy constraint-based approach to data reconciliation in material flow analysis

Data reconciliation consists in modifying noisy or unreliable data in order to make them consistent with a mathematical model (herein a material flow network). The conventional approach relies on least-squares minimization. Here, we use a fuzzy set-based approach, replacing Gaussian likelihood functions by fuzzy intervals, and a leximin criterion. We show that the setting of fuzzy sets provides a generalized approach to the choice of estimated values, that is more flexible and less dependent on oftentimes debatable probabilistic justifications. It potentially encompasses interval-based formulations and the least squares method, by choosing appropriate membership functions and aggregation operations. This paper also lays bare the fact that data reconciliation under the fuzzy set approach is viewed as an information fusion problem, as opposed to the statistical tradition which solves an estimation problem.     

Analytical and numerical study of the densification of carbon/carbon composites by a film-boiling chemical vapor infiltration process

The film-boiling chemical vapor infiltration (CVI) process is a fast process developed for composite material fabrication, and especially carbon/carbon composites. In order to help define optimal conditions, a local 1D model has been developed to study the densification front which establishes itself during the processing of a carbon/carbon fibrous preform. The model features heat conduction, precursor gas diffusion, densification reactions and structural evolution of the porous medium. The effects of total mass flux, Thiele modulus, porous medium geometry on front behavior parameters such as width, velocity and residual porosity are presented as semi-analytical correlations. An existence criterion is produced, which involves a minimal heat flux. Comparison between process-scale experiments and simulation is then possible by inserting the semi-analytical results achieved in the local study of the front into a light numerical model involving the entire preform. The model has been validated with respect to previous experimental and numerical data.     

Hepatic Δ9 and Δ6 desaturase activities during the recovery period following carbon tetrachloride poisoningdesaturase activities during the recovery period following carbon tetrachloride poisoning

The liver microsomal Δ⁹ and Δ⁶ desaturase activities have been studied in rats with carbon tetrachloride-induced hepatitis. Immediately after poisoning, significant decreases were observed for both types of desaturase activity. However, recovery kinetics were slower for the Δ⁶ desaturase than for the Δ⁹ desaturase. The activities of NADH-ferricyanide and NADH-cytochrome C reductases, proteins involved in the electron transfers associated with microsomal desaturation, were also measured. There was a fall in both activities after poisoning, but this decrease was less than that of the desaturase activities.     

In vitro comparison of hepatic metabolism of 9cis-11 trans and 10trans-12cis isomers of CLA in the rat

Hepatic metabolism of the two main isomers of CLA (9cis-11 trans, 10trans-12cisC_18∶2) was compared to that of oleic acid (representative of the main plasma FA) in 16 rats by using the in vitro method of incubated liver slices. Liver tissue samples were incubated at 37°C for 17h under an atmosphere of 95% O₂/5%CO₂ in a medium supplemented with 0.75 mM of FA mixture (representative of circulating nonesterified FA) and with 55 μM [1-¹⁴C]9cis-11 trans C_18∶2, [1-¹⁴C]10trans-12cis C_18∶2, or [1-¹⁴C]oleate. The uptake of CLA by hepatocytes was similar for both isomers (9%) and was three times higher (P<0.01) than for oleate (2.6%). The rate of CLA isomer oxidation was two times higher (49 and 40% of incorporated amounts of 9cis-11 trans and 10trans-12 cis, respectively) than that of oleate (P<0.01). Total oxidation of oleate and CLA isomers into [¹⁴CO₂] was low (2 to 7% of total oxidized FA) compared to the partial oxidation (93 to 98%) leading to the production of [¹⁴C] acid-soluble products. CLA isoemrs escaping from catabolism were both highly desaturated (26.7 and 26.8%) into conjugated 18∶3. Oleate and CLA isomers were mainly esterified into neutral lipids (30%). They were slowly secreted as parts of VLDL particles (<0.4% of FA incorporated into cells), the extent of secretion of oleate and of 10trans-12 cis being 2.2-fold higher than that of 9cis-11 trans (P<0.02). In conclusion, this study clearly showed that both CLA isomers were highly catabolized by hepatocytes, reducing their availability for peripheral tissues. Moreover, more than 25% of CLA escaping from catabolism was converted into conjugated 18∶3, the biological properties of which remain to be elucidated.     

Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

Immunoregulatory functions of paf-acether. VI. Dual effect on human B cell proliferation

The role of paf-acether (paf), a phospholipid cytokine, in the modulation of human B cell function was investigated. Paf, from 1×10⁻⁵ M to 10⁻⁶ M, decreased B cell proliferation induced by both phorbol myristate acetate (PMA) and anti-IgM antibodies (anti-IgM Ab). By contrast, 1×10⁻⁷ M to 1×10⁻⁹ M paf enhanced PMA triggered, but not anti-IgM triggered B cell proliferation. B cell proliferation was modulated between 24 and 72 hr of culture indicating that the effect of paf did not merely reflect a shift in proliferation kinetics. Interestingly, paf also enhanced the spontaneous proliferation of a Burkitt lymphoma-derived B cell line, Raji, which suggests that paf can directly act on B cells. The modulatory effect of paf on peripheral blood B cells was independent of PMA concentration, yet the effect on Raji cells was dependent upon cell density. The data suggest that paf is a potent modulator of B cell function, and may be involved in the control of humoral immune response. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Determination of the repartition of monomers between sol and gel fractions in copolycondensate glycerol/azelaic acid by radioassay

The distribution of the monomers between sol and gel fractions, theoretically forecasted from network formation theory, is experimentally determined in glycerol/azelaic acid system with tritium labeled glycerol by radioassay.Presented at the 7th Discussion Conference IUPAC Polymer Networks, Karlovy Vary, CSSR, September 15–19, 1980     

Proteomics of plaques and novel sources of potential biomarkers for atherosclerosis

Cardiovascular disease (CVD) is the leading cause of death and loss of productive life years in the world. The underlying syndrome of CVD, atherosclerosis, is a complex disease process, which involves lipid metabolism, inflammation, innate and adaptive immunity, and many other pathophysiological aspects. Furthermore, CVD is influenced by genetic as well as environmental factors. Early detection of CVD and identification of patients at risk are crucial to reduce the burden of disease and to allow personalized treatment. As established risk factors fail to accurately predict which part of the population is likely to suffer from the disease, novel biomarkers are urgently needed. Proteomics can play a significant role in identifying these biomarkers. In this review, we describe the progress made in proteome profiling of the atherosclerotic plaque and several novel sources of potential biomarkers, including circulating cells and plasma extracellular vesicles. The importance of longitudinal biobanking in biomarker discovery is highlighted and exemplified by several plaque proteins identified in the biobank study Athero-Express. Finally, we discuss the PTMs of proteins that are involved in atherosclerosis, which may become one of the foci in the ongoing quest for biomarkers through proteomics of plaque and other matrices relevant to the progression of atherosclerosis.