The Changing Role Of The City Centre In Adelaide And Melbourne

It is not too often that sufficient similarities and comparable data enable us to make significant comparisons between the central areas of Australian capital cities. This article presents such material about Adelaide and Melbourne. In particular, it takes advantage of floorspace and employment surveys carried out in these central areas in 1987 and 1992 to identify not only trends but important points of similarity and difference. Some of the more important reasons for these changes are canvassed in the context of current literature. The different policy responses of the two state governments and central city authorities are also examined as there has been a change in both cities to a state Liberal government following Labor governments which have incurred heavy financial losses and increased state debt.     

Electron beam lithography-assisted fabrication of Au nano-dot array as a substrate of a correlated AFM and confocal Raman spectroscopy

This paper documents a study of an Au nano-dot array that was fabricated by electron beam lithography on a glass wafer. The patterns that had features of 100nm dots in diameter with a 2-mum pitch comprised a total area of 200x200mum(2). The dot-shaped Cr underlayer was open to the air after developing Poly(methyl methacrylate) (PMMA). When dipped into the Cr etchant, the exposed Cr layer was eliminated from the glass wafer in a short period of time. In order to ultimately fabricate the Ti/Au dot arrays, Ti and Au were deposited onto the arrays with a thickness of 2 and 40nm, respectively. The lift-off procedure was carried out in the Cr etchant using sonication in order to completely remove the residual Cr/PMMA layer. The fabricated Au nano-dot array was then immersed in an Ag enhancing solution and then into an ethanol solution containing (N-(6-(Biotinamido)hexyl)-3'-(2'-pyridyldithio)-propionamide (Biotin-HPDP). The substrate was analyzed using a correlated atomic force microscopy (AFM) and confocal Raman spectroscopy. Through this procedure, position-dependent surface-enhanced Raman spectroscopy (SERS) signals could be obtained.     

Three-dimensional distinct element modelling and dynamic runout analysis of a landslide in gneissic rock, British Columbia, Canada

The McAuley Creek Landslide is a 6?million m³ gneissic rock slope failure that occurred in British Columbia (Canada) in late May–early June 2002. The geological strength index was used to characterize the quality of the overall rock mass and its reduced (damaged) quality near tectonic structures and alteration zones. Potential slope failure mechanisms were investigated using four analysis techniques including: kinematic analysis, surface wedge limit equilibrium (combination) analysis, block theory and three-dimensional distinct element models. Results from all four analyses suggested that the dominant slope failure mechanism was wedge sliding along the intersection of the gneissic foliation and a steeply dipping discontinuity set striking perpendicular to the slope. Of the 6?million m³ of material involved in the landslide, an estimated 5 million?m³ was deposited immediately below the source area against the opposite valley wall, with the remaining 1 million m³ travelling an additional 1.6?km downstream. The runout behaviour was investigated using a three-dimensional dynamic analysis code.     

Microbial community structure in activated sludge floc analysed by fluorescence in situ hybridization and its relation to floc stability

The efficiency of activated sludge treatment plants is dependent on the solid-liquid separation properties of the activated sludge. A critical parameter is the stability of the microbial flocs. Weak flocs deflocculate easily leaving increased concentrations of suspended solids in the effluent. The knowledge about how different bacteria are attached to the flocs and their influence on the bioflocculation is limited. In this study, the deflocculation of different phylogenetic groups of bacteria in activated sludge from a full scale plant was investigated. The experiments were carried out by using a shear method where the sludge flocs are deflocculated under controlled shear conditions. The degree of deflocculation was measured as increase in turbidity of the supernatant. Identification and quantification of the microbial community structure of both total activated sludge and deflocculated bacteria were conducted with group-specific gene probes for broad groups of bacteria (Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria and Actinobacteria) and fluorescence in situ hybridization (FISH). The microbial community structure of the deflocculated bacteria was different compared to the total activated sludge with a higher abundance of Gammaproteobacteria in the supernatant indicating that different groups of bacteria are bound with different strength to the floc surface. The results show that the bacteria in the outer parts of the flocs are relatively loosely bound to the floc matrix and can be easily eroded from the surface when exposed to shear.     

An in vitro assay to evaluate competitive exclusion products for poultry

An in vitro assay was developed to measure the ability of competitive exclusion (CE) bacteria to protect Caco-2 and CRL-2117 epithelial cells from invasion by Salmonella Typhimurium. The proposed assay is needed to expedite the development of defined-flora CE products. The average significantly protective concentration of the commercial poultry-specific CE product Preempt was 4.05 log CFU/6.41 log human Caco-2 cells and 3.71 log CFU/6.89 log CFU chicken CRL-2117 cells, Enterococcus faecalis isolated from Preempt protected CRL-2117 cells, Escherichia coli isolates protected Caco-2 cells, Lactococcus lactis and Bacteroides distasonis isolates protected both cell lines, and three species of Lactobacillus isolates failed to protect either cell line. A defined mixture of 29 strains of bacteria similar to the constituents of Preempt protected both cell lines from Salmonella invasion at a concentration of 7.83 log CFU. The constituents of the defined CE culture were separated into mixtures of obligate (8.42 log CFU) and facultative (8.49 log CFU) anaerobes, which both protected the cell lines, suggesting that both types of bacteria were equally protective. Although not a substitute for in vivo testing, the in vitro CE assay is a rapid technique for the evaluation of bacterial mixtures for potential CE products.     

Tubular membrane cathodes for scalable power generation in microbial fuel cells

One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.     

Determination of Pb complexation in oxic and sulfidic waters using pseudovoltammetry

Pseudovoltammetry was used to evaluate the actual Pb complexation occurring in natural water samples of varying oxygen and sulfide concentration. In pseudovoltammetry, the potential at which metal-ligand complexes are broken up to form the metal amalgam is used to determine the complexes' thermodynamic stability constants (KTHERM; corrected for metal and ligand side reaction coefficients) via the Nernst expression. This methodology removes the need for any metal additions and for subsequent modeling using fitting criteria, which provide only conditional stability constant data (KCOND). Using known organic ligands, a chelate scale ranging from log KTHERM = 4 to log KTHERM = 20 was developed as a template for comparison with samples collected from two stations of different salinities and at several depths in the Chesapeake Bay. These samples were observed to contain up to five different ligand compounds of unknown structural composition (log KTHERM > 8) with the strongest ligand fraction exceeding log KTHERM > 39 (the maximum observable thermodynamic stability constant due to the reduction of Na+). One possible explanation for the observed complexation is the existence of lead sulfide clusters. This was supported by laboratory experiments using electrochemistry and ICR-FTMS, which confirmed the formation of electrochemically inert multinuclear clusters with high stability constants (e.g., M3S3, log KTHERM = 62.9). However, in all field samples, (sub)nanomolar levels of acid-leachable sulfide were recovered at pH 5.0-6.2, which could be attributed to dissociation of lead sulfide complexes with moderate acidity. Recovery of sulfide increased from < 10% of the total dissolved Pb concentration (Pbdiss) in surface waters to 100% of the Pbdiss in the sulfide-rich bottom waters at the higher salinity location.     

Probiotic bacteria are antagonistic to Salmonella enterica and Campylobacter jejuni and influence host lymphocyte responses in human microbiota‐associated immunodeficient and immunocompetent mice

A defined human microbiota‐associated (HMA) mouse model in BALB/c and immunodeficient Tgε26 mice was used to assess the ability of probiotic lactobacilli and bifidobacteria to enhance colonization resistance to gastrointestinal (GI) tract pathogens. Probiotic bacteria (1×10⁸ colony forming unit (CFU)/mL) successfully excluded Campylobacter jejuni from both strains of mice 7 days after challenge. The probiotic bacteria also reduced the number of Salmonella in the large intestines of both mouse strains. The nylon wool fractionated spleen lymphocyte populations were incubated with Salmonella or C. jejuni antigens. The probiotic treatments did not affect lymphocyte proliferation to C. jejuni antigens, but significantly increased proliferation of lymphocytes to Salmonella antigens by 68 and 55%, respectively, over untreated mice. Caspase 3/7 activation was significantly reduced 33 and 38% in the T and B lymphocyte fractions, respectively, of probiotic‐treated, Salmonella‐challenged HMA BALB/c mice, suggesting that lymphocyte rescue from apoptosis was occurring as a result of probiotic bacteria activity. These results revealed an immunosuppressive activity by Salmonella that was inhibited by the presence of probiotic bacteria. In summary, lactobacilli and bifidobacteria competitively excluded C. jejuni from immunocompetent and immunodeficient mice and antagonized an observable Salmonella‐induced immunosuppression in immunocompetent mice.     

Antimicrobial susceptibility patterns of competitive exclusion bacteria applied to newly hatched chickens

Competitive exclusion (CE) products are mixtures of obligate and facultative anaerobic bacteria applied to poultry hatchlings for prevention of Salmonella colonization. These mixtures have the potential to introduce bacteria with undesirable antimicrobial drug resistance traits into the human food supply. Antimicrobial drug susceptibilities of 27 obligate and facultative anaerobes isolated from a commercial CE product were evaluated with a microdilution minimal inhibitory concentration (MIC) assay. Bacteroides distasonis and Bacteroides fragilis isolates were resistant to tetracycline and other antimicrobial drugs. An Escherichia coli isolate was resistant to four antimicrobial drugs: erythromycin, penicillin, vancomycin, and tylosin. Erythromycin-resistant enterococci and vancomycin-resistant Lactococcus lactis isolates in the CE product were detected. These findings suggest that more work needs to be done to assess the potential effects of CE product use in poultry on the food supply.