基于3G传输网络的道路气象预警系统

利用传感技术为监测手段开发一套基于3G传输网络的道路气象预警系统,使道路管理部门精确掌握气象资料和天气预报,并根据各路段的地形及气候特点,结合路段交通状况,制定各自的应急预案,以保证道路的行车安全和顺畅。此系统对道路沿线气象状况进行监测、分析并采取有效的应急预案,对保障道路过往车辆和人身财产安全有着积极作用。     

催化剂在聚酯氨基型印铁白涂料中的应用

介绍聚酯氨基型白涂料中催化剂的选择、用量的确定,并就催化剂对涂膜综合性能的影响作了简单的分析。     

聚甲醛耐老化性能及其改进研究

以研制耐候性聚甲醛为目标，将自制高分子改性剂、其它改性剂与聚甲醛共混(POM)以提高POM的耐老化性。通过拉伸强度、断裂伸长率、冲击强度和色差的测定，比较了未改性聚甲醛和改性聚甲醛的耐紫外光老化、热氧老化和热水老化性能，结果表明：自制改性剂与其它改性剂共混用于聚甲醛，能显著改善聚甲醛的稳定性及耐老化性。     

Modeling and economic analysis of CO<Subscript>2</Subscript> separation process with hollow fiber membrane modules

The main purpose of the study was to develop a model using ASPEN and Excel simulation method to establish optimum CO₂ separation process utilizing hollow fiber membrane modules to treat exhaust gas from LNG combustion. During the simulation, optimum conditions of each CO₂ separation scenario were determined while operating parameters of CO₂ separation process were varied. The characteristics of hollow fibers membrane were assigned as 60 GPU of permeability and 25 of selectivity for the simulation. The simulation results illustrated that 4 stage connection of membrane module is required in order to achieve over 99% of CO₂ purity and 90% of recovery rate. The resulted optimum design and operation parameters throughout the simulation were also correlated with the experimental data from the actual CO₂ separation facility which has a capacity of 1,000 Nm³/day located in the Korea Research Institute of Chemical Technology. Throughout the simulation, the operating parameters of minimum energy consumption were evaluated. Economic analysis of pilot scale of CO₂ separation plant was done with the comparison of energy cost of CO₂ recovery and equipment cost of the plant based on the simulation model. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

化学铣切槽液中Na2S的分析

本文采用“碘量法”测定化铣液中的硫化钠，分析结果的准确度和精密度完全能够满足生产要求。     

酚酞聚芳醚酮（PEK－C）填充料的研究

本文筛选出几种特定的酸性金属氧化物填料，研究了其粒度及粒子形状对ＰＥＫ－Ｃ的复合化效果和填充后的ＰＥＫ－Ｃ体系的力学性能、加工性能和结构形态。结果表明，ＴｉＯ２、Ｃｒ２Ｏ３、Ａ１２Ｏ３及ＭｏＳ２等与ＰＥＫ－Ｃ具有良好的亲合性，对ＰＥＫ－Ｃ起到了明显地增量、补强作用。在保持ＰＥＫ－Ｃ树脂的基本物理性能前提下，可降低注射用ＰＥＫ－Ｃ专用料的价格。     

降膜传质过程Marangoni效应稳定性分析

通过建立降膜流动传质模型，并考虑液相流动及非线性浓度分布的影响，利用线性微扰理论得到了降膜流动传质过程Marangoni效应发生的理论临界条件.用所建立的降膜流动传质实验装置得出实测传质系数的变化，由此获得Marangoni效应发生的实测临界条件，实测值与理论值基本符合，从而为工业上常见的降膜流动传质过程中Marangoni现象的预测和利用提供了理论依据.     

Recent Progress in Software Testing, Debugging and Analysis: A Survey

This article is a survey on the recent progress of some hot topics of software engineering. The survey is based on the review on the papers of three premier conferences on software engineering from 2012 to 2013. Through the quantitative analysis on these papers, there are three hot topics identified, software testing, debugging, and analysis. Focusing on these three topics, this article summarizes some new achievements in these fields, analyzes the characteristics of these works, and points out some directions for future research.     

PP/M-HOS/POE三元复合材料的界面改性与力学性能

采用马来酸酐接枝聚丙烯(PP-g-MAH)及马来酸酐接枝乙烯-1-辛烯共聚物(POE-g-MAH)为界面相容剂，利用熔融共混法制备PP／镁盐晶须(M—HOS)／POE三元复合材料，研究了PP-g-MAH及POE-g-MAH的用量及配比、M-HOS和POE的用量对三元复合材料力学性能的影响。结果表明：当PP／M-HOS／POE的质量比为100／10／20时，PP-g-MAH的最佳用量为3份；利用PP-g-MAH及POE-g-MAH作为复合相容剂可同时改善M-HOS与PP和POE的界面相容性，促进POE、M-HOS对PP的增韧补强作用，使三元复合材料的力学性能得到了明显的改善。     

一种嵌入式U盘数据采集系统的设计

根据数据采集系统中有大量数据需要存储又要方便与计算机交互这一实际需要,提出在数据采集系统中嵌入USB—Host．实现用U盘或移动硬盘作为数据存储介质的设计方案。