Numerische Simulation der Faserbewegung beim Strangpressen kurzfaserverstärkter Glasschmelzen

Numerical Simulation of the Fibre-Motion during the Extrusion of Short-Fibre-Reinforced Glass-Melts Fibre-reinforced materials are characterized by an anisotropic behaviour of the mechanical properties, which is caused by the alignment of the embedded fibres. In the case of short-fibre-compounds this behaviour is strongly influenced by the mechanism of flow during the manufacturing process. Numerical simulation Methods are preferentially used to get informations about the orientation of the reinforced fibres at the end of the molding-process and to improve the properties of the compound. For that, a model is developed, which calculates the motion of the short-fibres in the area of flow, basing on a three-dimensional finite-element-computation. Thereby the interaction between the Particular fibres during the orientation process is considered by using an interaction coefficient. Examplified at the extrusion of short fibre reinforced glass-melts, the fibre orientation is determined at models with different geometries of the pressing tool and variable boundary conditions. This procedure allows to determine the influence of the process-parameters On the expected quality of the composite. The represented simulation-model can also be used for other molding- and extrusion-processes of fibre reinforced materials.     

The Determination of the Level of Bicarbonate, Carbonate, or Carbon Dioxide in Aqueous Solutions

A rapid and convenient method for the measurement of bicarbonate, carbonate, or carbon dioxide in water was developed using fourier transform infrared spectroscopy (FTIR). Bicarbonate and carbonate are converted to carbon dioxide by lowering the pH of the solution, then the absorbance of the dissolved carbon dioxide at 2345 wavenumbers is measured using a liquid sample cell. If the measurement of dissolved carbon dioxide is the objective, the pH is not adjusted, and the carbon dioxide in the free form can be measured without interference from low levels of carbonates. The method is linear from 10.48 ppm to a minimum of 366.8 ppm carbon dioxide (r squared = 0.9996). The coefficient of variation at 10.48 ppm (LOD 3 signal/noise), 52.4 ppm, and 262 ppm is 45.6, 4.0, and 3.9, respectively. The average percent recovery at 10.48 ppm, 52.4 ppm, and 262 ppm is 74.5, 104.2, and 104.0, respectively.     

Numerical differentiation of the radical artery sphygmogram by Tikhonov regularization

A method is proposed and substantiated for determining the characteristic points of the pulse wave (sphygmogram) of the human radial artery, by numerical differentiation with the aid of the Tikhonov regularization algorithm. The results are given of experiments made to test the stability, to evaluate the accuracy of recovering the first and second derivatives, and to establish the sensitivity of the method to random distortions of the original data. Based on this method, we have solved one of the chief technical problems in the objectivization and automatization of the pulse diagnostics of Tibetan medicine, by the development and construction of an information-computing Tibetan medicine diagnostic complex, for processing medicobiological information in real time.Translated from Izmeritel'naya Tekhnika, No. 11, pp. 60–62, November, 1994.     

SO2 SCRUBBING BY ULTRAFINE CA(OH)2 AEROSOL

The objective of the present study was to generate submicrometer calcium hydroxide aerosols and to investigate the effectiveness of such aerosols in sulfur capture. The effectiveness of SO₂ removal by Ca(OH)₂ aerosol has been investigated in an isothermal reactor. Ca(OH) ₂ aerosol was generated by a novel fluidizer system in which submicrometer-sized powders were entrained in gases. SO₂ was added to this aerosol to a concentration of 2000 ppm. The aerosol-SO₂ mixture was heated to 550°C-750°C in an isothermal tube reactor. The SO₂ removal efficiency, which varied from 20% to 70%, was determined to be a function of the aerosol concentration, reactor temperature and residence time. The fraction of aerosol reacted was not affected strongly by the aerosol concentration. The reaction kinetics were determined from the experimental data using a simple analytical model in which the rate is first order in both SO₂ and calcium hydroxide aerosol concentrations.     

Perspective channel-type reactor with enhanced safety

Following the search for new design solutions to develop within the framework of channel trends the reactor with enhanced safety the Research and Development Institute of Power Engineering has developed the design of the multiloop boiling water reactor (MKER). The MKER enhanced safety is attained when involving the inherent safety features, passive safety systems as well as the accident consequences confinement devices. The design realizes several advantages which are typical of the channel-type reactors, namely: the design desintegration simplifying the manufacture, control, equipment delivery and decreasing, versus the pressure vessel reactors, the accident effect if it proceeds in an explosive manner; small operating reactivity margin and fuel burnup increased due to continuous refuelling; fuel cycle flexibility allowing comparatively easily to adopt the reactor to the conjuncture of the country fuel balance; multiloop circuit of the main coolant which reduces the degree and effect of the accidents connected with the equipment and pipings rupture; monitoring of the channels and fuel assemblies leak-tightness.     

Fluorescence flow cytometry of human leukocytes in the detection of LDL receptor defects in the differential diagnosis of hypercholesterolemia

A flow-cytometric method with fluorescence-labeled monoclonal antibodies (MABs) against the low density lipoprotein (LDL) receptor (C7A MAB) or 3,3'-dioctadecylindocarbocyanin-iodide (DiI) LDL has been developed that allows the quantification of LDL receptors on leukocytes and the identification of patients with familial hypercholesterolemia (FH) within 48 hours. Leukocytes were isolated from 10 mL anticoagulated blood by density gradient centrifugation. To induce maximal expression of LDL receptors, mononuclear cells were preincubated with either phytohemagglutinine (PHA) or lipoprotein-deficient serum (LPDS). LPDS-treated monocytes provided a more homogeneous cell population with regard to LDL receptor activity than did the PHA-treated lymphocytes; they also provided a greater discrimination between the fluorescence of the receptor probes and cellular autofluorescence. The C7A MAB was able to compete for DiI LDL binding by about 40%. In competition with unlabeled LDL, DiI LDL revealed linear binding, indicating an affinity similar to native LDL. The binding characteristics of DiI LDL were also similar to 125I-LDL binding. LDL isolated from familial defective apolipoprotein B-100 was not able to compete for DiI LDL binding on monocytes, whereas native LDL reduced it by about 80%. In monocytes from FH heterozygous patients, the cellular mean fluorescence using either C7A MAB or DiI LDL at 4 degrees C was 30% to 70%; in FH homozygotes, cellular mean fluorescence was less than 20% of that in monocytes from normal individuals. In patients with familial defective apolipoprotein B-100 antibody binding was normal, but one patient's own LDL failed to compete with normal DiI LDL for 4 degrees C binding on U937 test monocytes. Patient monocytes having internalization defects showed normal 4 degrees C DiI LDL binding, but at 20 degrees C cell-associated fluorescence was reduced by about 40%. In our study 384 hypercholesterolemic patients (preselected according to serum cholesterol levels, clinical symptoms, and family history) were analyzed for LDL receptor expression using the C7A MAB-based assay. In 71.8% of the patients with cholesterol levels higher than 300 mg/dL, an LDL receptor deficiency was observed. Apolipoprotein E isoforms and lipoprotein[a] were found to be independent from the LDL receptor status. In some patients with high cholesterol levels but normal LDL receptor expression with the C7A MAB assay, LDL receptor defects could be diagnosed when either reduced binding or internalization of DiI LDL or familial defective apolipoprotein B-100 was detected.(ABSTRACT TRUNCATED AT 400 WORDS)     

Auditory hallucinations suppressed by etizolam in a patient with schizophrenia

A patient presented with a 15 year history of schizophrenia with auditory hallucinations. Though unresponsive to prolonged trials of neuroleptics, the auditory hallucinations disappeared with etizolam.     

Effect of grain boundary phase on the thermal conductivity of aluminium nitride ceramics

AIN with high thermal conductivity was fabricated by pressureless sintering with Y₂O₃ as the sintering aid. The thermal conductivity was observed to increase with sintering time (up to 8 h) at 1810 °C. The distribution of the sintering aid was identified as one of the major factors influencing the thermal conductivity in AIN. Non-uniform distribution of the grain boundary phase was found to be associated with a significant amount of porosity, resulting in the enhancement of phonon scattering and thereby lowering the thermal conductivity.