Long-wavelength 640×486 GaAs-AlGaAs quantum well infraredphotodetector snap-shot camera

A 9-μm cutoff 640×486 snap-shot quantum well infrared photodetector (QWIP) camera has been demonstrated. The performance of this QWIP camera is reported including indoor and outdoor imaging. The noise equivalent differential temperature (NEΔT) of 36 mK has been achieved at 300 K background with f/2 optics. This is in good agreement with expected focal plane array sensitivity due to the practical limitations on charge handling capacity of the multiplexer, read noise, bias voltage, and operating temperature     

CMOS on FZ-high resistivity substrate for monolithic integration ofSiGe-RF-circuitry and readout electronics

The choice of a highly resistive substrate for silicon millimeter-wave integrated circuits (SIMMWIC) imposed by the requirement of low RF-substrate losses requires the adaptation of a CMOS process on float zone silicon (FZ). A comparison of n- and p-channel devices realized on high resistivity substrate (p-type, 5000 Ω·cm) and standard CMOS substrates (CZ, n-type, 4-6 Ω·cm) is given. Using careful process design, we obtained device characteristics on FZ-substrates that are closely similar to those on standard material, thus allowing direct transfer of existing circuit designs     

Identification and molecular characterization of two tandemly located flagellin genes from Aeromonas salmonicida A449

Two tandemly located flagellin genes, flaA and flaB, with 79% nucleotide sequence identity were identified in Aeromonas salmonicida A449. The fla genes are conserved in typical and atypical strains of A. salmonicida, and they display significant divergence at the nucleotide level from the fla genes of the motile species Aeromonas hydrophila and Aeromonas veronii biotype sobria. flaA and flaB encode unprocessed flagellins with predicted Mrs of 32,351 and 32,056, respectively. When cloned under the control of the Ptac promoter, flaB was highly expressed when induced in Escherichia coli DH5alpha, and the FlaB protein was detectable even in the uninduced state. In flaA clones containing intact upstream sequence, FlaA was barely detectable when uninduced and poorly expressed on induction. The A. salmonicida flagellins are antigenically cross-reactive with the A. hydrophila TF7 flagellin(s) and evolutionarily closely related to the flagellins of Pseudomonas aeruginosa and Vibrio anguillarum. Electron microscopy showed that A. salmonicida A449 expresses unsheathed polar flagella at an extremely low frequency under normal laboratory growth conditions, suggesting the presence of a full complement of genes whose products are required to make flagella; e.g., immediately downstream of flaA and flaB are open reading frames encoding FlaG and FlaH homologs.     

Calculation of the acoustical characteristics of gas transport equipment of the unit type in the design stage

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 11, pp. 28–30, November, 1993.     

Impact and penetration by L/D ≤ 1 projectiles

Calculations of steel target penetration by L/D ≤ 1 tungsten and tungsten alloy projectiles have been extended to L/D = 1/32 over the velocity range 1.5 to 5 km/s. The ratio of crater to projectile diameter tends to 1 as L/D decreases over this entire velocity range. For impact velocities of 1.5 and 3 km/s, penetration depth normalized by projectile length, P/L, increases with decreasing projectile L/D up to a maximum value and then decreases for still lower L/D. Experiments at impact velocities of 2 and 3 km/s confirm these results. For 5 km/s impact velocity, the calculations show P/L increasing with decreasing projectile L/D over the entire range 1/32 ≤ L/D ≤ 1. The projectile L/D for which the maximum P/L occurs appears to depend on the impact velocity. P/L generally scales with impact velocity as P/L v^f(L/D) where f(L/D) ranges from 0 for a long rod to, we believe, 2 in the limit as projectile L/D approaches zero. The calculations show for 1/8 ≤ L/D ≤ 1/2, P/L v^0.9; for L/D = 1/16, P/L v^1.5; and for L/D = 1/32, the new results give P/L v^1.9.     

Betriebsmittelbezogene Lastmodellierung in Verteilungsnetzen

Übersicht Der Betriebszustand eines Verteilungsnetzes wird durch die Strombelastung aller Betriebsmittel beschrieben. Mit Hilfe einer statischen Estimationsmethode werden aus einzelnen Messungen und der Kenntnis der Verbrauchsdaten typische Verbraucherkurven (TVK) berechnet, die das elektrische Verhalten verschiedener Verbrauchergruppen widerspiegeln. Auf dieser Basis ist eine betriebsmittelbezogene Lastmodellierung an beliebigen Betriebsmitteln in Abhängigkeit der Verbraucherzusammensetzung unter Berücksichtigung externer Einflüsse wie der Temperatur möglich. Die so gewonnenen Belastungsverläufe erlauben eine Beschreibung des Netzzustands in den Verteilungsnetzen.

---

Bus load modelling in distribution systems

Contents The operating state of a distribution system is determined by the bus load current. Based on individual substation measurements and the load composition typical load curves are calculated using statistical estimation theory. These typical load curves describe the electrical behaviour of the different load types (e.g. household, storage heating, commerce etc.). As soon as the typical load curves are determined it is possible to calculate the bus load current in any substation taking external influences such as temperature into consideration. The bus load current serve as load models which completely describe the operating state of the distribution system.

     

T cell responsiveness correlates differentially with antibody isotype levels in clinical and asymptomatic filariasis

To establish the relationships among T and B cell responses, active infection, and clinical manifestations in lymphatic filariasis, filarial-specific lymphocyte proliferation, IgG antibody isotypes, and IgE levels were determined in an exposed population: 31 asymptomatic amicrofilaremics, 43 microfilaremics, 12 symptomatic amicrofilaremics, and 52 elephantiasis patients. Lymphocyte proliferation was higher in elephantiasis patients and asymptomatic amicrofilaremics than in microfilaremics (P < .004). A proportion of asymptomatic amicrofilaremics (32%), elephantiasis patients (37%), and symptomatic amicrofilaremics (58%) showed antigen-specific lymphocyte unresponsiveness, and lymphocyte proliferation to filarial antigens correlated negatively with specific IgG4 levels (rho = -0.315, P < .001). As elevated specific IgG4 is an indicator of active infection, it is argued that active infection may result in lymphocyte hyporesponsiveness irrespective of clinical category. Of those with elevated specific IgE levels and high T cell proliferative responses, 70% had elephantiasis, suggesting these factors have a role in pathology. However, the existence of a proportion of elephantiasis patients with low anti-filarial IgE and T cell unresponsiveness to filarial antigens suggests that elephantiasis can be caused by distinct processes.     

Biology of chronic radiation effect on tissues and wound healing

Radiation therapy exerts both acute and chronic effects on normal tissue included within treatment fields. The physics of radiation therapy and treatment techniques to minimize deleterious effects of radiation are presented. Management of radiation-damaged skin is discussed. Radiation effect on tissue, wound healing, and tumorigenesis also are reviewed.     

Thermal interaction between water flow and frozen ground under hydroerosion

A model for one of the methods of thermal reclamation of frozen ground is proposed which allows for water flow temperature variations on the ground surface due to heat exchange between the water flow and a thawing solid. In a computation experiment, the specific features of phase transition front propagation and liquid temperature variation are studied.Institute of Physicotechnical Problems of the North, North Branch of the Russian Academy of Sciences, Yakutsk, Russia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 64, No. 2, pp. 168–171, February, 1993.