Mass transfer in a rotor dispersion-film apparatus

Results of experimental investigations of the desorption of carbon dioxide from water in a rotor dispersion-film apparatus are presented. The main factors influencing the volume mass-transfer coefficient in the liquid phase and the efficiency of mass transfer in this apparatus were determined. A comparative analysis of the apparatus investigated with other analogous apparatus has been carried out. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 2, pp. 144–148, March–April, 2007.     

Multifrequency gyrotron with high-efficiency synthesized waveguide converter

The results of numerical simulation and experimental investigation of a prototype of a megawatt multifrequency gyrotron for controlled thermonuclear fusion facilities are presented. In experiments, the gyrotron has operated at six frequencies in the range 105–152 GHz with small diffraction losses in the internal quasi-optical system and a high Gaussian mode content in the output beam.     

Microfabricated preconcentrator-focuser for a microscale gas chromatograph

The design, fabrication, and testing of a preconcentrator-focuser (PCF), consisting of a thick micromachined Si heater packed with a small quantity of a granular adsorbent material are described. The PCF is developed to capture and concentrate vapors for subsequent focused thermal desorption and analysis in a micro gas chromatograph. The microheater contains an array of high-aspect-ratio, etched-Si heating elements, 520 /spl mu/m (h)/spl times/50 /spl mu/m (w)/spl times/3000 /spl mu/m (l), bounded by an annulus of Si and thermally isolated from the remaining substrate by an air gap. This structure is sandwiched between Pyrex glass plates with inlet/outlet ports that accept capillary tubes for sample flow and is sealed by anodic bonding (bottom) and rapidly annealed glass/metal/Si solder bonding (top). The large microheater surface area allows for high adsorption capacity and efficient, uniform thermal desorption of vapors captured on the adsorbent within the structure. The adsorbent consists of roughly spherical granules, /spl sim/200 /spl mu/m in diameter, of a high-surface-area, graphitized carbon. Key design considerations, fabrication technologies, and results of performance tests are presented with an emphasis on the thermal desorption characteristics of several representative volatile organic compounds as a function of volumetric flow rates and heating rates. Preconcentration factors as high as 5600 and desorbed peak widths as narrow as 0.8 s are achieved from 0.25-L samples of benzene at modest heating rates. The effects of operating variables on sensitivity, chromatographic resolution, and detection limits are assessed. Testing of this PCF with a micromachined separation column and integrated sensor array is discussed briefly.     

Reibungsversuche mit Krypton bei niedrigen Drücken

Tests of a linear Equation on the Evaluation of Krypton Friction Experiments at low Pressures and Connections to Viscosity Effects The coefficient of viskosity is nearly constant in the region with STP conditions and is independent of the pressure. This coefficient decreases with lowering the pressure until the region of molecular flow is reached. There we have free molecular‐ or vacuum viscosity. Experiments with the friction of gas have to take in the gas between surfaces which are movabel and parallel. Reactions of the gas with the moving surface cannot be neglected. We made our lab‐examinations of gas friction effects between two rotating cylinders. Generally there is a linear equation of the reciprocal values of viscosities and pressures. Our experiments show a region, where this linear relation is valid. This region has a low limit with coming to molecular flow and an upper limit if the gas is warmed up by friction at higher pressures.     

Methods and results of tests of a large model of the TUK-84 container

Tests of a prototype model of TUK-84 and the corresponding experimental procedures used at the test center of the All-Russia Research Institute of Technical Physics are described. The results are presented, and it is shown that the prototype withstood the tests. __________ Translated from Atomnaya énergiya, Vol. 100, No. 6, pp. 441–445, June, 2006.     

Hartstoffschichten für das Pressen und Prägen von Gläsern bei hohen Temperaturen

Hard and wear resistant coatings for the moulding and embossing of glasses at elevated temperatures Hard and wear resistant coatings of Titanium Aluminium Nitride TiAlN were deposited on various substrates by the application of different reactive deposition processes: RF-magnetron-sputtering, ion beam-sputtering and by the energetic cluster impact (ECI) process. The deposition of the coatings was performed under variation of biasing conditions and of process parameters such as pressures and flow rates of the process gases argon and nitrogen as well as of energies of species hitting the substrate surfaces. The microstructure particularly the growth morphology of several films was investigated by pictures of film cross sections recorded by transmission electron microscopy. Residual intrinsic film stresses were analyzed by measuring deflections of substrates in an interference optical microscope before and after the deposition of the coatings. By heating coated substrates and in-situ observation of deflections at elevated temperatures dependencies of thermally induced stresses on temperatures and variations of intrinsic stresses due to changes within the films could be analyzed and related to microstructure and growth conditions. In the paper specific characteristics of the deposition processes occuring on the scale both of atoms and of clusters which may contain several thousand of atoms are described and related to microstructure, residual stress states and damaging conditions. Different contributions to residual film stresses are analyzed on the base of theoretical considerations taking into account deposition kinetics and thermomecanical properties. The significance of achieved film properties for application, i. e. for the coating of tools for the manufacturing of optical components by moulding and embossing of glasses is discussed.     

Molecular studies on kinin receptors

We describe the results of functional studies on DNA clones encoding functional bradykinin receptors derived from human, rat, and mouse sources and including both genomic and complementary DNA clones. In both the Xenopus oocyte and the COS cell expression systems, the receptors from human and rat showed the pharmacological properties of B2 receptors, but receptors from mouse displayed both B1- and B2-like pharmacological properties. We further investigated the molecular relationship between the B1 and B2 receptor subtypes expressed by a human fibroblast cell line, and we demonstrate that these two receptor subtypes are encoded by distinct mRNA species.     

A new ZVS-PWM unity power factor rectifier with reduced conductionlosses

This paper introduces a new single-phase high power factor rectifier, which features regulation by conventional PWM, soft commutation and instantaneous average line current control. Furthermore, thanks to the use of a single converter, instead of the conventional configuration composed of a four-diode front-end rectifier followed by a boost converter, a significant reduction in the conduction losses is achieved. A prototype rated at 1.6 kW, operating at 70 kHz, with an input AC voltage of 220 Vrms and an output voltage of 400 V_DC has been implemented in the laboratory. An efficiency of 97.8 % at 1.6 kW has been measured. Analysis, design, and the control circuitry are also presented in the paper