Special features of synthesis of a heat-resistant glass-ceramic coating

In order to protect Ni–Cr alloys from high-temperature corrosion, a new heat-resistant glass-ceramic coating was developed with a glass matrix synthesized on the basis of a composite R _x O–Al₂O₃–SiO₂–TiO₂ (R–Li^–, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺) system. The special features of the formation of crystalline phases in the glasses in heat treatment and the optimum regime for the formation of a glass ceramic structure are described.Translated from Steklo i Keramika, No. 3, pp. 30–32, March, 1996.     

Measurements of distribution of self-bias potential on an RF-plane electrode in plasma etching devices

The self-bias potential (V_dc) induced on an RF-powdered electrode (153 mm Ø) in a plasma is measured using electrical probes which are buried in, de-insulated from, and RF-connected to the electrode. The configuration of the probes allows to study the distribution of V_dc discretely on the electrode. The potential is homogeneous in the absence of external magnetic field. In the presence of a homogeneous magnetic field parallel to the electrode, it is reduced and a monotonous gradient takes place in its distribution due to the plasma shift induced by E × B drift. When the magnetic field is rotated along the axis of the RF-electrode at a frequency less than 50 Hz, the distribution, which is almost identical to the one in a static field, rotates with the magnetic field. On the coordinate system rotating with the magnetic field, the probes are regarded to be rotating. The potential distribution is obtained as a continuous function of the azimuthal angle. Thus the rotation of the field provides information for the experimental interpolation.     

VLSI chip set for 2D HDTV subband filtering with on-chip linememories

A chip set for 2D subband filtering of HDTV signals has been designed, fabricated and successfully tested. The two chips perform 10*14 quadrature mirror filtering for analysis filtering at the coder and synthesis filtering at the decoder. In order to achieve a very compact realization, the architectures utilize all a priori known properties of the filter algorithm. A 2D polyphase filter structure reduces the processing clock rate from the 72-MHz sampling rate to a moderate 18 MHz. The memory for vertical filtering is realized by on-chip parallel shift registers with multiphase clocking. A small silicon area for the filter arithmetic is achieved by application of carry save adder trees with fixed filter coefficients represented by canonical signed digits. A complete filterbank for luminance and chrominance signals consists of four identical chips, each with 450 000 transistors on 92 mm²     

In vivo clonal expression of T lymphocytes specific for an immunodominant N-terminal myelin basic protein epitope in healthy individuals

The role of myelin basic protein (MBP) T cell recognition in the induction of experimental allergic encephalomyelitis (EAE) has been well established in mice and rats. A remarkable restriction has been observed in T cell receptor (TCR) genes utilized by encephalitogenic T cell lines (TCLs) specific for immunodominant epitopes in these species. Pathological similarities between this animal model and multiple sclerosis (MS) has led to consider MBP as a major candidate autoantigen in this human disorder. Unlike in inbred strains of animals, the T cell response to MBP in humans is quite heterogenous with regard to fine epitope specificity. The existence of V alpha and/or V beta restriction in MBP-specific T cells, from MS patients and healthy controls, is still a matter of debate. In this study we generated 77 MBP-specific TCLs from nine healthy donors and showed that peptide 7-27 is one of the most frequently recognized epitopes. 37% of all epitope-specific TCLs recognized this peptide and p7-27 specific TCLs were generated from seven out of the nine subjects studied. A high level of in vivo clonal expansion was observed in p7-27-specific TCLs in several subjects, which however is not specific of this epitope since this phenomenon was also observed in p85-104- and 149-162-specific TCLs.     

Mixed waste ferrite as a novel sorbent for carbon dioxide derived from flue gases

Ferrite is a potential sorbent for flue gases such as CO₂, H₂S and SO₂. This paper discusses the adsorption and decomposition of CO₂ into carbon by hydrogen-activated waste ferrites prepared from Berkeley Pit acid mine water (Butte, MT). The decomposition effectiveness of these waste ferrites was studied at 300 °C and compared with the synthetic magnetite obtained from ferrous sulfate solution in our laboratory. The decomposition was measured by two methods: indirectly by measuring the adsorption rate of CO₂ and directly by analysing the carbon deposited on the samples. The results indicated that the mixed waste ferrite had good affinity for the adsorption and decomposition. The CO₂ decomposition data of both sorbents fitted the first-order reaction kinetics. Even though the surface area of the magnetite was higher than that of waste ferrite, the CO₂ decomposition rate of the waste ferrite was estimated to be 2.5 times higher than that of magnetite under identical conditions. The carbon analysis deposited on the sample indicated that the CO₂ was 100% decomposed into carbon and other carbon/hydrogen compounds by the waste ferrite, whereas the conversion was 43% by the magnetite. In terms of specific adsorption of carbon, ferrite was three to five times more efficient than magnetite.     

Zirconium recovery from zircaloy shavings

A chlorination process for recovering Zr from zircaloy scrap has been studied. Zircaloy chlorination was possible at temperatures as low as 220 °C. The scale microstructure and its effect on the zircaloy reactivity was analysed using Thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDXS) and scanning electron microscopy (SEM) techniques. A solid-solid phase transformation took place into the oxide scale during the zircaloy chlorination. Zirconium, as ZrCl₄(g), was separated from the oxide scale and chlorides of Cr and Fe. The effect of the reaction temperature was also analysed.     

Experimental investigation of systems for synchronizing time scales by means of the Quasar satellite communication system network

Experiments conducted at ground stations of the Quasar satellite communication network using both a null base as well as a base of around 2000 km is described. In experiments with a null base, the time scale transmission error was 1 nsec. Comparison of the results of collocation with data cbtained by the GLONASS system in the course of experiments using a 2100-km base demonstrated a divergence of the results of from 5 to 25 nsec. Translated from Izmeritel'naya Tekhnika, No. 4, pp. 35–38, April, 1996.