Surface and Biological Activity of Some Prepared Iminium Surfactants Based on Schiff Bases

A series of novel iminium surfactants were prepared through quaternization of different prepared fatty Schiff bases with benzyl chloride. The chemical structures were confirmed using FTIR, ¹H-NMR and mass spectroscopy. The surface properties and biological activity of these surfactants were investigated. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min), Efficiency (PC₂₀) and Effectiveness (π_CMC) as well as the free energy of micellization ( $ \Updelta G_{\text{mic}}^{\text{o}} $ ) and adsorption ( $ \Updelta G_{\text{ads}}^{\text{o}} $ ) were calculated. It was found that the prepared compounds have good surface and biological activity.     

Novel Imidazolium-Based Gemini Surfactants: Synthesis, Surface Properties, Corrosion Inhibition and Biocidal Activity Against Sulfate-Reducing Bacteria

Three novel imidazolium-based gemini surfactants had been synthesized and characterized using different spectroscopic techniques. The surface properties of the synthesized surfactants were determined using surface tension measurements at 20 °C. The surface parameters including critical micelle concentration (CMC), π _CMC, Pc₂₀, Γ_max and A _min were determined. The synthesized compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution using the weight loss and polarization techniques. The biological activity of these surfactants was evaluated against sulfate reducing bacteria using most probable number method. The results indicate that the synthesized compounds have good surface properties and are proper corrosion inhibitors for low carbon steel, with a high inhibition efficiency observed around their CMC. These compounds exhibit a significant biocidal activity against sulfate reducing bacteria.     

Influence of K2TiF6 additive on the hydrogen sorption properties of MgH2

In this study, the hydrogen storage properties of MgH₂ with the addition of K₂TiF₆ were investigated for the first time. The temperature-programmed desorption results showed that the addition of 10 wt% K₂TiF₆ to the MgH₂ exhibited a lower onset desorption temperature of 245 °C, which was a decrease of about 105 °C and 205 °C compared with the as-milled and as-received MgH₂, respectively. The dehydrogenation and rehydrogenation kinetics of 10 wt% K₂TiF₆-doped MgH₂ were also significantly improved compared to the un-doped MgH₂. The results of the Arrhenius plot showed that the activation energy for the hydrogen desorption of MgH₂ was reduced from 164 kJ/mol to 132 kJ/mol after the addition of 10 wt% K₂TiF₆. Meanwhile, the X-ray diffraction analysis showed the formation of a new phase of potassium hydride and titanium hydride together with magnesium fluoride and titanium in the doped MgH₂ after the dehydrogenation and rehydrogenation process. It is reasonable to conclude that the K₂TiF₆ additive doped with MgH₂ played a catalytic role through the formation of active species of KH, TiH₂, MgF₂ and Ti during the ball milling or heating process. It is therefore proposed that this newly developed product works as a real catalyst for improving the hydrogen sorption properties of MgH₂.     

Thermal modelling of end milling

Determination of the temperatures during machining is one of the most important challenges for accurate milling simulations. Coupled with excessive shearing, plastic deformation and friction in a small region of cutting, the temperatures in milling may have very significant impact on parts and tools such as dimensional errors, residual stresses and tool wear. Temperature exhibits a non-linear complex-modelling problem in milling process. In this article, for the first time, a novel thermal modelling is introduced for fast and accurate prediction of temperatures in end milling processes. A theoretical modelling approach and experimental validations are presented for various cutting conditions.     

Promising growth inhibitory potential of extracted natural silk sericin biopolymer against DEN-induced liver tumor in male mice

Silk sericin (SS), a protein biopolymer, is gaining an increasing attention in a variety of biomedical applications. Our objective was to identify the optimal extraction method yielding the highest silk protein content, to assess its chemical elemental composition, to characterize it, and to compare its conformation by X-ray diffraction and Fourier-transform infrared versus that of the commercial one. Herein, alkali and high temperature is the perfect approach. This study aimed further to test whether extracted SS could attenuate the adverse hepatotoxic effects induced by diethylnitrosamine (DEN) in mice. Animals were injected intraperitoneally once weekly for four consecutive weeks with physiological saline (0.9% NaCl), DEN (25 mg/kg), SS (1 g/kg) 90 min prior to DEN injection, melatonin (10 mg/kg) followed within 1 h with the administration of SS and 30 min later with DEN. The results confirmed the hepatotoxicity of DEN manifested by an increase in liver enzymes' activity, and pathological changes in the liver tissue. The combined use of SS and/or melatonin with DEN returned most of the parameters to values similar to the controls. Briefly, chemically characterized SS seems a valuable extract for further consideration as anti-carcinogenic agent. It has the potential to upgrade liver cancer chemotherapeutic agents.     

Long‐term oropharyngeal colonization by C. albicans in children with cystic fibrosis

This longitudinal prospective study aimed to determine the prevalence of oropharyngeal colonization by C. albicans in children with cystic fibrosis (CF), and observe the continuity of candidal colonization and the changes in production of virulence factors, susceptibility to antifungal agents and RAPD patterns of the isolates. Thirty‐seven children with CF were followed‐up for oropharyngeal C. albicans colonization for 18 months. The colonization rate was detected in 54%. All isolates were susceptible to amphotericin B, but those isolated from one patient were resistant to fluconazole. Biofilm production, secretory acid proteinase, phospholipase and esterase activity rates were 30%, 60%, 75% and 80%, respectively. RAPD analysis with the primers OPE‐03 and OPE‐18 was performed for genotyping. RAPD patterns of the strains isolated from the same patient were related to each other, whereas they were not related with other strains isolated from different patients. Two C. albicans strains isolated from the same patient were found to be unrelated to one another. As a result, long‐lasting colonization of the oropharyngeal mucosa of children with CF by endogenous C. albicans isolates having the same RAPD pattern was demonstrated. Colonization prevalance and development of resistance to antifungal agents and the increased production of virulence factors were not correlated. Copyright © 2013 John Wiley & Sons, Ltd.     

Isolation and identification of antimicrobial peptides derived by peptic cleavage of whey protein isolate

The antimicrobial potential of whey protein isolate hydrolyzed by gastrointestinal enzymes was determined by attempting to identify and characterize the antimicrobial peptides responsible. While tryptic and chymotryptic hydrolysates did not show antibacterial activity, whey proteins hydrolyzed for 45–90 min by pepsin exhibited significant activity. Fractionation of 60-min hydrolysate by reversed-phase high performance liquid chromatography yielded 5 fractions that were antibacterial, with minimum inhibitory concentrations comprised between 20 and 35 μg/mL. These fractions contained short peptides not previously identified as antimicrobial. Fragment 14–18 (KVAGT) of β-lactoglobulin is very close to a sequence previously identified as antibacterial and is found in antimicrobial sequences of diverse origin. Five other peptides derived from β-lactoglobulin, and one fragment from α-lactalbumin (f117–121, KVGIN), were also identified as antibacterial. The identified peptides do not match pepsin action exactly, indicating modified proteolysis of unknown origin. Protein by-products of the dairy industry offer potential for large-scale production of antimicrobial peptides.     

Development of a Date Confectionery: Part 1. Relating Formulation to Instrumental Texture

The Sultanate of Oman in the Middle East produces a large amount of dates, which in 2003 amounted to about 285,360 tons. Most of the harvest is used for animal feed and the rest for local consumption. The need to utilize dates in a more efficient way is a must. In this study, a new candy was developed using two date varieties, i.e., Khalas and Umesilla thus spanning from top to bottom of the quality range in terms of consumer preference. Proximate analysis argues that products are nutritious and can contribute especially to the daily allowance in macro-elements. Texture profile analysis suggests that the affordable date candy of Umesilla belongs to the same family of products with the Khalas candy in terms of the attributes of hardness, firmness, brittleness and adhesiveness. Products were aged up to thirteen weeks, with results demonstrating that the textural quality remains stable throughout the storage period.     

One Step Synthesis of NiO Nanoparticles via Solid-State Thermal Decomposition at Low-Temperature of Novel Aqua(2,9-dimethyl-1,10-phenanthroline)NiCl2 Complex

[NiCl₂(C₁₄H₁₂N₂)(H₂O)] complex has been synthesized from nickel chloride hexahydrate (NiCl₂·6H₂O) and 2,9-dimethyl-1,10-phenanthroline (dmphen) as N,N-bidentate ligand. The synthesized complex was characterized by elemental analysis, infrared (IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and differential thermal/thermogravimetric analysis (TG/DTA). The complex was further confirmed by single crystal X-ray diffraction (XRD) as triclinic with space group P-1. The desired complex, subjected to thermal decomposition at low temperature of 400 ºC in an open atmosphere, revealed a novel and facile synthesis of pure NiO nanoparticles with uniform spherical particle; the structure of the NiO nanoparticles product was elucidated on the basis of Fourier transform infrared (FT-IR), UV-vis spectroscopy, TG/DTA, XRD, scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDXS) and transmission electron microscopy (TEM).     

Outage Probability Analysis of Cooperative Diversity Networks Over Weibull and Weibull-Lognormal Channels

This paper presents the analysis of outage probability for a cooperative diversity wireless network using amplify-and-forward relays over independent non-identical distributed Weibull and Weibull-lognormal fading channels for single as well as multiple relays. To reach that end, a closed-from expression for the moment-generating function of the total signal-to-noise-ratio (SNR) at the destination is derived in terms of the tabulated Meijer’s G-function. Since it is hard to determine the exact probability distribution function of the SNR, a tight lower bound approximation is proposed. Simulation results are presented that show that the outage probability lower bound tends to be tight at high SNR values thus verifying the analytical results. The results also show the potential gain of relaying on the outage probability.