The effect of the special instruction of bronchial asthma patients on the efficacy of their treatment

As the data collected in a survey we conducted show, a major part of the modern general practitioner's work continues to be in the field of family medicine. This fact is also confirmed by the results of other surveys of general practice today. Patients still appreciate their GPs as a source of good medical care and counseling for the whole family. Our own study has shown that most patients would even like to see an expansion of the GP's counseling activities. The duration of the doctor-family relationship extends over many years, and is frequently longer than a decade.     

Influence of drying conditions on the gelling properties of the 7S and 11S soy protein fractions

Soy protein fractions rich in β-conglycinin (7S) or glycinin (11S) were freeze dried or spray dried at temperatures of 120, 150 or 180 °C. The fractions were characterized for their particle size distribution, sorption isotherms and by scanning differential calorimetry. The gelling capacity of the protein fractions was studied at pH values of 3 and 7 using oscillatory measurements, mechanical properties and water holding capacity. The rheological measurements showed that viscous modulus (G″) predominated at low temperatures and the elastic modulus (G′) at high temperatures. At pH 3, the G′–G″ crossover occurred at lower temperatures when compared to pH 7. This behaviour was more accentuated for the 11S fractions due to its capacity to form stronger gels. An increase of drying temperature led to a displacement of the gel point to higher temperatures and decreased the elasticity modulus or gelling capacity of protein fractions. These results were confirmed by the mechanical properties, since at higher temperatures the gels were more fragile and brittle, especially when formed at pH 7.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Multiphase reacting flow studies of bubble column ozonation reactor for water remediation

A multiphase Volume‐of‐fluid (VOF) model was developed to gain further insights into the reactive flow parameters and electrical capacitance tomography (ECT) measurements on the remediation of hazardous organic pollutants. Low ozone bubble frequencies were obtained for high surface tension fluids, and the liquid viscosity affected the ozone bubbling frequency. The VOF model indicated that the increase of inlet gas velocity enriched the ozone bubble detachment and concomitantly generated larger ozone bubbles, decreasing the detoxification rates. VOF mappings and ECT visualizations of gas‐liquid unveiled preferential routes and highlighted the attenuation of the axisymmetric behavior of the ozonation bubble column under high‐interaction regimes.     

SUPERCRITICAL EXTRACTION OF LINSEED OIL: ECONOMICAL VIABILITY AND MODELING EXTRACTION CURVES

The aim of the present study was to use supercritical technology to recover linseed oil (Linum usitatissimum L.) using carbon dioxide (alone or modified with ethanol as solvent) to determine the influence of the technique on the chemical composition of the oil obtained, model the kinetic curves of extraction, and estimate the manufacturing cost of the process. The experiments were conducted at 323 K, pressure of 25 MPa, constant solvent flow of 1.7 × 10^?5 kg/s, and extraction time of 5 h. The highest yield was obtained with the addition of cosolvent (28.8%). The SFE process of linseed oil manufacture proved to be economically viable, resulting in a product with a specific cost of 13.21 US$/kg_oil. As to oil composition, the main fatty acids detected were linolenic and oleic acid.     

Effect of post-cure on the glass transition temperature and mechanical properties of epoxy adhesives

The effects of post-curing and cure temperature on the glass transition temperature, T _g, and the mechanical properties of epoxy adhesives were studied. T _g was measured by a dynamic mechanical analysis apparatus developed in-house and the mechanical properties of the adhesives (yield strength, Young’s modulus and failure strain) were measured by a tensile machine. The relationships between T _g and mechanical performance under various post-cure conditions were investigated. The curing process was the same for all tests, consisting of an initial stage performed at different temperatures followed by cooling at room temperature. Three sets of specimens were considered, sharing the same initial cure process, but with a different post-curing procedure. In the first set, the specimens were only subjected to a curing process; in the second set, the specimens were subjected to a curing process followed by a post-cure performed at a temperature below the T _g of the fully cured network, T _g∞; and in the third set, the specimens were subjected to a curing process followed by a post-cure performed at a temperature above the T _g∞. When post-cured at a temperature above T _g∞, the mechanical and physical properties tend to have a constant value for any cure temperature.     

Contribution of the Tyr-1 in Plantaricin149a to Disrupt Phospholipid Model Membranes

Plantaricin149a (Pln149a) is a cationic antimicrobial peptide, which was suggested to cause membrane destabilization via the carpet mechanism. The mode of action proposed to this antimicrobial peptide describes the induction of an amphipathic α-helix from Ala7 to Lys20, while the N-terminus residues remain in a coil conformation after binding. To better investigate this assumption, the purpose of this study was to determine the contributions of the Tyr1 in Pln149a in the binding to model membranes to promote its destabilization. The Tyr to Ser substitution increased the dissociation constant (K_D) of the antimicrobial peptide from the liposomes (approximately three-fold higher), and decreased the enthalpy of binding to anionic vesicles from −17.2 kcal/mol to −10.2 kcal/mol. The peptide adsorption/incorporation into the negatively charged lipid vesicles was less effective with the Tyr1 substitution and peptide Pln149a perturbed the liposome integrity more than the analog, Pln149S. Taken together, the peptide-lipid interactions that govern the Pln149a antimicrobial activity are found not only in the amphipathic helix, but also in the N-terminus residues, which take part in enthalpic contributions due to the allocation at a lipid-aqueous interface.     

Lipidic membranes are potential "catalysts" in the ligand activity of the multifunctional pentapeptide neokyotorphin

Neokyotorphin (NKT) is a multifunctional pentapeptide that is involved in biological functions as diverse as analgesia, antihibernatic regulation and proliferation stimulus of tumour cells. The interaction of neokyotorphin with cell membranes is potentially important to all these multiple biological processes since receptor-mediated processes are thought to be involved in neokyotorphin action. Sargent and Schwyzer proposed in their "membrane catalysis" model that ligands interact with membrane lipids in order to adopt the necessary conformation for cell receptors. We have used fluorescence techniques to study the depth, orientation and extent of incorporation of NKT with model membrane systems (lipidic vesicles). The roles of lipid charge, membrane phase and sterol presence were investigated. The phenolic ring of tyrosine is located in a shallow position in membranes. The extent of partition is less in gel crystalline membranes than in liquid crystalline membranes. Addition of cholesterol causes a reorientation of the tyrosine ring at the interface of lipidic bilayers. Lipidic membranes meet all the conditions required for acting as potential "catalysts" in the ligand activity of the multifunctional pentapeptide NKT, because they modulate the exposure and orientation of the phenolic ring, which is most likely involved in docking to receptors.