Isotope effect in the binding of tritium and 14C-labelled cortisol to corticosteroid-binding-globulin in serum

We have determined the free cortisol concentration in serum using either the Amicon MPS-1 ultrafiltration-centrifugation method (I) or equilibrium dialysis (II). If procedure I was used we found that [1,2,6,7-3H]-, and [4-14C]cortisol had a lower affinity than unlabelled cortisol for corticosteroid binding globulin (CBG). The binding affinity (Ka) to three separate CBG-containing samples was 8-18 times lower for [1,2,6,7-3H]cortisol and 30-90 times lower for [4-14C]cortisol, when compared with that of unlabelled cortisol. This difference in affinity to CBG was not observed if method II was used for the free cortisol determinations. The observed isotope effect in method I is not caused by unspecific binding to material such as the Amicon MPS-1 chamber or to impurities in the tracer. We suggest that the centrifugation step during ultrafiltration changed the conformation of CBG, thereby reducing its affinity for labelled cortisol. It is concluded that incorrect results will be obtained if radiolabelled is cortisol used for determining the free cortisol content of plasma with the Amicon MPS-1 device.     

Fabrication of polycrystalline (Y0.7Gd0.3)2O3:Eu ceramics: The influence of initial pressure and sintering temperature on its morphology and photoluminescence activity

Nanocrystalline (Y_0.7Gd_0.3)₂O₃ powder, synthetised via polymer complex solution method, was compacted into 25 pellets applying high pressures (173-867 MPa) for 30 s that were subsequently sintered at different temperatures (800-1400 °C) for 18 h. The morphology and optical characteristics of the starting powder and prepared ceramic samples were monitored and discussed in order to identify the changes induced with the variations of initial compacting pressure, which influence is often neglected, and with sintering temperature. The grain size tends to decrease significantly with increasing pressure, even when elevated temperatures are used for annealing, while low compacting pressure resulted in grain coarsening and, in some cases, even in anomalous morphology of ceramic samples. Luminescence emission in ceramic samples decays faster than in nanopowders, that is in complete agreement with the grain formation and gradual transformation to the bulk material. Judd-Ofelt intensity parameters and branching ratios were calculated taking into account the difference in effective refractive index for nanopowder and ceramic samples.     

Metal silicide/poly-Si Schottky diodes for uncooled microbolometers

Nickel silicide Schottky diodes formed on polycrystalline Si 〈P〉 films are proposed as temperature sensors of monolithic uncooled microbolometer infrared focal plane arrays. The structure and composition of nickel silicide/polycrystalline silicon films synthesized in a low-temperature process are examined by means of transmission electron microscopy. The Ni silicide is identified as a multi-phase compound composed of 20% to 40% of Ni₃Si, 30% to 60% of Ni₂Si, and 10% to 30% of NiSi with probable minor content of NiSi₂ at the silicide/poly-Si interface. Rectification ratios of the Schottky diodes vary from about 100 to about 20 for the temperature increasing from 22℃ to 70℃; they exceed 1,000 at 80 K. A barrier of around 0.95 eV is found to control the photovoltage spectra at room temperature. A set of barriers is observed in photo-electromotive force spectra at 80 K and attributed to the Ni silicide/poly-Si interface. Absolute values of temperature coefficients of voltage and current are found to vary from 0.3%℃ to 0.6%/℃ for forward bias and around 2.5%/℃ for reverse bias of the diodes.     

Identification of the Sex Pheromone of the Currant Shoot Borer Lampronia capitella

Under an artificial light:dark cycle, females of Lampronia capitella were observed calling, with extended terminal abdominal segments, during the first 2 hr of the photoperiod. Extracts of terminal abdominal segments from females elicited large electroantennographic responses from male antennae. Gas chromatography with electroantennographic detection revealed three active peaks. Based on comparison of retention times and mass spectra of synthetic standards, these compounds were identified as (Z,Z)-9,11-tetradecadienol and the corresponding acetate and aldehyde. The electroantennographic activity of the four geometric isomers of all three compounds was investigated, and the respective (Z,Z)-isomer was found to be the most active in all cases. Aldehydes generally elicited larger antennal responses than alcohols, whereas acetates were the least active compounds. A subtractive trapping assay in the field, based on a 13:26:100 micrograms mixture of (Z,Z)-9,11-tetradecadienal, (Z,Z)-9,11-tetradecadienyl acetate, and (Z,Z)-9,11-tetradecadienol confirmed that all three compounds are pheromone components. Subtraction of (Z,Z)-9,11-tetradecadienol from the blend completely eliminated its attractiveness, whereas the other two-component blends showed reduced activity. This is the first pheromone identification from the monotrysian superfamily Incurvarioidea, confirming that the common pheromones among ditrysian moths (long-chain fatty acid derivatives comprising alcohols, acetates, and aldehydes with one or more double bonds) is not an autapomorphy of Ditrysia, but a synapomorphy of the more advanced heteroneuran lineages.     

Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.     

Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.