Bolted tension flanges joining square hollow section members

Tests and theoretical analysis on the maximum strength of high strength bolted tension flanges joining square hollow section members have been carried out. Yield line theory has been applied in a similar way to that presented in a previous paper. Correlation between test results and theoretical predictions is quite satisfactory. Based on this study, a simple design formula has been proposed.     

Morphology of thin anatase coatings prepared from alkoxide solutions containing organic polymer,affecting the photocatalytic decomposition of aqueous acetic acid

Porous anatase coatings were prepared from alkoxide solutions containing organic polymer by a dip-coating technique. The morphology of the coatings, such as pore size, pore distribution and thickness, was controlled. The effects of the morphology of the porous anatase coatings on the photocatalytic activity for the photocatalytic decomposition of aqueous acetic acid were examined.     

Silica removal from Mokai, New Zealand, geothermal brine by treatment with lime and a cationic precipitant

Preliminary experiments using two chemicals (CaO, a quicklime, and a cationic nitrogen-bearing precipitant, EC-004) to remove silica from geothermal brine were undertaken at the Mokai geothermal plant, New Zealand. The brine was mixed with the reagent (CaO or EC-004). The reaction was studied from the start of the experiment (NRT, 0 min, no retaining time) and after 15 min (15RT) at 90 °C. The concentration of silica in the brine was initially 954 mg/l, and decreased linearly with increasing reagent concentration. When CaO is added, the silica concentration at 15RT was 200 mg/l lower than at NRT and became almost zero on addition of 1.5 g/l. In contrast, when EC-004 is added, the total silica concentration nearly reaches the solubility of amorphous silica at 90 °C. In order to prevent silica scaling in Mokai brines cooled to 90 °C, the CaO and EC-004 added should be individually adjusted to 0.5 g/l and 80 mg/l, respectively.     

Do chart reviews and interviews provide the same information about breast and cervical cancer screening?

Magnetic resonance imaging allows a noninvasive assessment of myelination during normal brain maturation as well as the detection of genetically determined and acquired diseases that affect the synthesis and maintenance of myelin. If this high sensitivity of magnetic resonance imaging for white matter changes is completed by adequate clinical and biochemical information, a unique diagnostic tool is available to gain new insights in the formation of myelin and pathogenesis of myelin disorders.     

Soft-decision Viterbi decoding with diversity combining formulti-beam mobile satellite communication systems

Diversity combining methods for mobile satellite communication systems employing convolutional encoding and soft-decision Viterbi decoding are evaluated. Computer simulation clarifies that the pre-Viterbi-decoding maximal ratio combining method has better performance than other methods in Rician fading channels. The simulation results agree with the Pe (bit error probability) performance derived from the numerical analysis for slow fading using the approximate Pe performance of Viterbi decoding in AWGN (additive white Gaussian noise) channels and the probability density function of Rician fading. Applying this diversity method to the multi-beam mobile satellite communication systems, a satellite beam diversity reception scheme is proposed. A computer simulation result shows that the proposed scheme decreases the packet error rate of the control signals to less than 1/100 around the satellite beam boundary     

A 286 mm2 256 Mb DRAM with ×32 both-ends DQ

This paper describes a 256 Mb DRAM chip architecture which provides up to ×32 wide organization. In order to minimize the die size, three new techniques: an exchangeable hierarchical data line structure, an irregular sense amp layout, and a split address bus with local redrive scheme in the both-ends DQ were introduced. A chip has been developed based on the architecture with 0.25 μm CMOS technology. The chip measures 13.25 mm×21.55 mm, which is the smallest 256 Mb DRAM ever reported. A row address strobe (RAS) access time of 26 ns was obtained under 2.8 V power supply and 85°C. In addition, a 100 MHz×32 page mode operation, namely 400 M byte/s data rate, in the standard extended data output (EDO) cycle has been successfully demonstrated     

Protein C Osaka 10 with aberrant propeptide processing: loss of anticoagulant activity due to an amino acid substitution in the protein C precursor

We studied the molecular basis of protein C deficiency in a family with a history of thromboembolic disease. An approximately 50% reduction in anticoagulant activity despite normal levels of protein C amidolytic activity and antigen was detected in plasma from the proband. All the exons and intron/exon junctions of the protein C gene were studied using a strategy that combined polymerase chain reaction amplification with DNA sequencing of the amplified fragments. We identified a C-to-A change at nucleotide number 1387 of the protein C gene in the proband and his mother, and this mutant was designated protein C Osaka 10. The C-to-A change resulted in the substitution of Ser for Arg at position -1, which is the processing protease cleavage site. The mutant protein C was partially purified from plasma of the patient's mother using barium adsorption followed by ion-exchange column chromatography. It eluted at the same sodium chloride concentration as normal protein C, and thus gamma-carboxylation of the mutant protein appeared to be normal. The apparent molecular weight of this mutant protein C was the same as that of the normal protein on immunoblotting. Amino-terminal sequence analysis showed that the light chain of the mutant protein C had an additional Ser at position-1. Thus, the loss of anticoagulant activity of protein C Osaka 10 can be explained by alteration of the conformation of the Gla domain by the additional Ser in the mutant molecule.     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

Pulmonary and allergy subspecialty care in adults with asthma. Treatment, use of services, and health outcomes

This study examined the relationship of several maternal variables to the duration of exclusive breast-feeding and the total duration of breast-feeding, along with attitudes, perceptions, and beliefs about breast-feeding among women living in poor neighborhoods of Managua, Nicaragua. The field work was carried out in December 1992 and January 1993 using qualitative and quantitative methods. A structured questionnaire was administered in interviews with 556 mothers of children under 12 months of age, and meetings of four directed discussion groups were held, in which a total of 20 women participated. At one week of age, almost all the children of the mothers who were surveyed had been breast-fed, but only 45% had been exclusively breast-fed. At 12 weeks old, 30% were already completely weaned. The discussion groups revealed the coexistence of positive opinions about both breast-feeding and bottle-feeding. However, exclusive breast-feeding was considered harmful for the mother, and breast milk was not thought to be sufficient nourishment for the child. Previous experience was strongly related to the duration of exclusive breast-feeding and to total breast-feeding duration. Attitudes, social support, and work situation were important factors influencing the total length of time women breast-fed a child. In general, the results obtained through the interviews and in the discussion groups were in agreement and showed that the elements needed to promote exclusive breast-feeding were social support, a favorable community environment, and policies that dealt with problems faced by working mothers. The complementary research methods were useful for obtaining information about the relative importance of different factors that determine the duration of breast-feeding and for understanding that practice in greater depth from the mother's point of view.