Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers     

Runoff of pharmaceuticals and personal care products following application of biosolids to an agricultural field

Municipal biosolids are a source of nutrients for crop production. Beneficial Management Practices (BMPs) can be used to minimize the risk of contamination of adjacent water resources with chemical or microbial agents that are of public or environmental health concern. In this field study, we applied biosolids slurry at a commercial rate using either subsurface injection or broadcast application followed by incorporation. Precipitation was simulated at 1, 3, 7, 22, 36 and 266 days post-application on 2 m² microplots to evaluate surface runoff of 9 model pharmaceuticals and personal care products (PPCPs), atenolol, carbamazepine, cotinine, gemfibrozil, naproxen, ibuprofen, acetaminophen, sulfamethoxazole and triclosan. In runoff from the injected plots, concentrations of the model PPCPs were generally below the limits of quantitation. In contrast, in the broadcast application treatment, the concentrations of atenolol, carbamazepine, cotinine, gemfibrozil, naproxen, sulfamethoxazole and triclosan on the day following application ranged from 70-1477 ng L^− 1 in runoff and generally declined thereafter with first order kinetics. The total mass of PPCPs mobilized in surface runoff per m² of the field ranged from 0.63 µg for atenolol to 21.1 µg for ibuprofen. For ibuprofen and acetaminophen, concentrations in runoff first decreased and then increased, suggesting that these drugs were initially chemically or physically sequestered in the biosolids slurry, and subsequently released in the soil. Carbamazepine and triclosan were detected at low concentrations in a runoff event 266 days after broadcast application. Overall, this study showed that injection of biosolids slurry below the soil surface could effectively eliminate surface runoff of PPCPs.     

Metallization and Ar‐O plasma effects on dental enamel roughness evaluated with SEM and MeX™ for 3D reconstruction

The MeX? software is a useful tool for tridimensional data collection for surface evaluation and could be relevant to evaluate the same specimen in different phases of the study, assuming repeated measures of dental enamel roughness. The aim of this study was to evaluate the influence of sample metallization for dental enamel roughness analysis with 3D images reconstructed using MeX? software from Scanning Electron Microscopy (SEM) images. The influence of 74.98% (%mol/mol) argon?oxygen plasma for carbon layer removal on surface roughness of the metallized specimen was also evaluated. Dental enamel specimens were prepared for SEM analysis with and without carbon metallization using conventional or environmental modes. Argon?oxygen plasma for carbon layer removal was used and surface roughness was re‐evaluated. Roughness obtained by SEM and MeX? reconstructed images, with or without metallization, did not differ. No significant alteration on surface roughness after carbon layer removal using plasma was found. SEM baseline evaluation using conventional mode without sample preparation and in environmental mode were not comparable. Roughness of enamel 3D images reconstructed with MeX? software from SEM images, with or without metallization was similar. The 74.98% (%mol/mol) argon?oxygen plasma removed the carbon layer with no effect on enamel roughness.     

Characterizing the nano and micro structure of concrete to improve its durability

New and advanced methodologies have been developed to characterize the nano and microstructure of cement paste and concrete exposed to aggressive environments. High resolution full-field soft X-ray imaging in the water window is providing new insight on the nano scale of the cement hydration process, which leads to a nano-optimization of cement-based systems. Hard X-ray microtomography images of ice inside cement paste and cracking caused by the alkali–silica reaction (ASR) enables three-dimensional structural identification. The potential of neutron diffraction to determine reactive aggregates by measuring their residual strains and preferred orientation is studied. Results of experiments using these tools are shown on this paper.     

Radar Altimetry Aids Managing Gauge Networks

The hydrological observation network in the Amazon basin is made of conventional rainfall and water level stations presently maintained by the Agência Nacional de Águas (ANA), the National Agency for Waters. The water level network has long been plagued by difficulties associated with spatial coverage, timely delivery and data errors. Satellite observations are important means for providing hydrologic data with acceptable spatial and temporal resolution, and radar altimeters embarked onboard successive satellites since the early 1970s collect measurements of water level over rivers in a well-defined geodetic reference frame and can be used to address some of these problems. Nowadays, satellite altimetry can be used to collect the time variations of the water levels over many rivers throughout the word, as long as the reach are several hundred meters wide. This ability is particularly interesting in ungauge basins but it can also be used as an independent source of information to cross-check existing gauge series. In the present study, we focus on examples from the Amazon basin where radar altimetry has been used to provide an independent dataset that can be used to support the management of hydrological observation networks by including new data together with conventional field data,     

Taioba (Xanthosoma sagittifolium) Leaves: Nutrient Composition and Physiological Effects on Healthy Rats

Several studies have shown that fruits and vegetables contribute to protect against degenerative pathologies such as cardiovascular diseases, diabetes, and cancer, mainly due to the presence of dietary fiber (DF) and polyphenols. Taioba (Xanthosoma sagittifolium) is an edible aroid widely grown in many parts of Africa, America, and Asia. The tubers portions of taioba are widely consumed; however, the leafy portions are generally discarded, despite their high nutritive value. In this study, we have partly characterized the DF of lyophiized taioba leaf (LTL), and assessed the possible protective effects on biochemical parameters and on bile acid (BA) production in colon and cecum, when fed to healthy rats for 4 wk. Forty‐five Wistar rats were assigned to either of 5 groups: group 1 received AIN 93G diet (CG: Control); group 2 received AIN 93G containing 2.5% of cellulose + 2.5% inulin (CEIN_5%); group 3 received AIN 93G containing 2.5% of cellulose + 2.5% taioba fiber (CETA_5%); group 4 received AIN 93G containing 5% cellulose + 2.5% taioba fiber (CETA_7.5%); group 5 received AIN 93G containing 5% cellulose + 2.5% of inulin (CEIN_7.5%). LTL showed high contents of total fiber, predominantly comprising insoluble DF with glucose as the major monomer. Rats receiving LTL had increased fecal mass and fat excretion, and improved BA profiles by diminishing the proportion of secondary acids, thus suggesting that consumption of taioba leaf may have the property of lowering the risk of colon cancer.     

Synaptic compensation on Hopfield network: implications for memory rehabilitation

The discrete-time neural network proposed by Hopfield can be used for storing and recognizing binary patterns. Here, we investigate how the performance of this network on pattern recognition task is altered when neurons are removed and the weights of the synapses corresponding to these deleted neurons are divided among the remaining synapses. Five distinct ways of distributing such weights are evaluated. We speculate how this numerical work about synaptic compensation may help to guide experimental studies on memory rehabilitation interventions.     

Analysis of cubic and orthorhombic C<Subscript>3</Subscript>A hydration in presence of gypsum and lime

Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) have been used to study the microstructural changes and phase development that take place during the hydration of cubic (pure) and orthorhombic (Na-doped) tricalcium aluminate (C₃A) and gypsum in the absence and presence of lime. The results demonstrate that important differences occur in the hydration of each C₃A polymorph and gypsum when no lime is added; orthorhombic C₃A reacts faster with gypsum than the cubic phase, forming longer ettringite needles; however, the presence of lime slows down the formation of ettringite in the orthorhombic sample. Additional rheometric tests showed the possible effects on the setting time in these cementitious mixes.     

An integrated project of entrepreneurship and innovation in engineering education

This paper presents a new line of project based learning in the School of Engineering of University of Minho: the Innovation and Entrepreneurship Integrated Project (IEIP). Four groups, each one composed of students from different engineering integrated master courses – Mechanical, Industrial Electronics and Computers, Polymer, Industrial Management – compete against each other in developing or improving commercial products manufactured by actual industries. There have been so far five editions of the IEIP, with five different companies and five diverse products, however, all these products included components that required knowledge from all the engineering courses involved. Only with the cooperation between the students of the various courses that compose each multidisciplinary team, the success is attainable. As each student has to deal with various engineering scopes, students’ technical skills are greatly enlarged and they acquire a multidisciplinary knowledge that was not possible in another way. Their soft skills like project management, teamwork, communication ability and personal development, which are valuable requisites for their future employers, are also improved. The participating industries also take advantage of the project: the groups competing against each other act as a multiskilled work force, actually making proposals capable of improving their products, their efficiency, and reducing costs.