Cost-Benefit Analysis of Residential Energy-Efficiency Upgrades in Phoenix, Arizona

With worldwide energy consumption rising, there is a need to reduce energy use of the housing stock. While this general idea is well-known, there is an overwhelming amount of product data and manufacturers claims through which the homebuilder or designer must sort to make informed selections of energy-efficient upgrades. The main objective of this research was to identify cost effective–energy efficient upgrades from a group of 16 commonly available choices, and rank them according to the most beneficial for the least cost. This study was conducted in Phoenix, Arizona, and included a sample of 30 production-style homes typical of the Phoenix metropolitan area. Energy-simulation software was used to perform energy evaluations and derive the benefits of each upgrade. The cost of each upgrade was obtained from a database of national average costs and from a local context. Differences in the selection of beneficial upgrades vary dramatically with the source of the cost information. This research provides a generic methodology that can be used by builders and designers to select appropriate energy-efficient upgrades for a given geographic area that will provide high operating benefits relative to the amount of capital investment.     

Binodal and spinodal curves: a simulation for various high polymer mixtures

Flory's equation-of-state theory has been used to predict the lower critical solution temperature behaviour of polymer—polymer mixtures. The spinodal phase boundary of numbers of high molecular weight polymer mixtures have been previously simulated using this theory. In this paper a procedure for simultaneous predictions of the binodal and the spinodal curves by equating the chemical potential of each component in the mixture is presented. The method is tested for five different mixtures. The effects of the binary and pure component state parameters on the simulated curves are discussed and the simulated phase diagrams are compared with the experimental cloud point curves. It is found that in most cases the results are more consistent with the cloud point curve being closer to the spinodal curve than the binodal.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Antihypertensive agent moxonidine enhances muscle glucose transport in insulin-resistant rats

The sympatholytic antihypertensive agent moxonidine, a centrally acting selective I1-imidazoline receptor modulator (putative agonist), may be beneficial in hypertensive patients with insulin resistance. In the present study, the effects of chronic in vivo moxonidine treatment of obese Zucker rats--a model of severe glucose intolerance, hyperinsulinemia and insulin resistance, and dyslipidemia--on whole-body glucose tolerance, plasma lipids, and insulin-stimulated skeletal muscle glucose transport activity (2-deoxyglucose uptake) were investigated. Moxonidine was administered by gavage for 21 consecutive days at 2, 6, or 10 mg/kg body weight. Body weights in control and moxonidine-treated groups were matched, except at the highest dose, at which final body weight was 17% lower in the moxonidine-treated animals compared with controls. The moxonidine-treated (6 and 10 mg/kg) obese animals had significantly lower fasting plasma levels of insulin (17% and 19%, respectively) and free fatty acids (36% and 28%, respectively), whereas plasma glucose was not altered. During an oral glucose tolerance test, the glucose response (area under the curve) was 47% and 67% lower, respectively, in the two highest moxonidine-treated obese groups. Moreover, glucose transport activity in the isolated epitrochlearis muscle stimulated by a maximally effective insulin dose (13.3 nmol/L) was 39% and 70% greater in the 6 and 10 mg/kg moxonidine-treated groups, respectively (P<.05 for all effects). No significant alterations in muscle glucose transport were elicited by 2 mg/kg moxonidine. These findings indicate that in the severely insulin-resistant and dyslipidemic obese Zucker rat, chronic in vivo treatment with moxonidine can significantly improve, in a dose-dependent manner, whole-body glucose tolerance, possibly as a result of enhanced insulin-stimulated skeletal muscle glucose transport activity and reduced circulating free fatty acids.     

Understanding source effects in ADHD rating scales: Reply to DuPaul (2003).

G. J. DuPaul (see record 2003-02033-012) offered two suggestions for additional research to understand the strong source effects reported by R. Gomez, G. L Burns, J. A. Walsh, and M. A. de Moura (see record 2003-02033-001) in attention-deficit/ hyperactivity disorder (ADHD) rating scales. The first suggestion was to determine whether the source effects represent mostly bias or accuracy. The second suggestion was to minimize source effects through the development of better ADHD rating scales. Because source effects can represent bias or accuracy, it is important to minimize the bias aspect through content validation procedures prior to attempts to determine whether source effects better reflect bias or accuracy. This comment offers various suggestions to reduce the bias in ADHD rating scales. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development of composite tissue scaffolds containing naturally sourced mircoporous hydroxyapatite

The aims of this work were to investigate the conversion of a marine alga into hydroxyapatite (HA), and furthermore to design a composite bone tissue engineering scaffold comprising the synthesised HA within a porous bioresorbable polymer. The marine alga, Phymatolithon calcareum, which exhibits a calcium carbonate honeycomb structure, with a natural architecture of interconnecting permeable pores (microporosity 4–11 μm), provided the initial raw material for this study. The objective was to convert the alga into hydroxyapatite while maintaining its porous morphology using a sequential pyrolysis and chemical synthesis processes. Semi-quantitative XRD analysis of the post-hydrothermal material (pyrolised at 700–750 °C), indicated that the calcium phosphate (CaP) ceramic most likely consisted of a calcium carbonate macroporous lattice, with hydroxyapatite crystals on the surface of the macropores. Cell visibility (cytotoxicity) investigations of osteogenic cells were conducted on the CaP ceramic (i.e., the material post-hydrothermal analysis) which was found to be non-cytotoxic and displayed good biocompatibility when seeded with MG63 cells. Furthermore, a hot press scaffold fabrication technique was developed to produce a composite scaffold of CaP (derived from the marine alga) in a polycaprolactone (PCL) matrix. A salt leaching technique was further explored to introduce macroporosity to the structure (50–200 μm). Analysis indicated that the scaffold contained both micro/macroporosity and mechanical strength, considered necessary for bone tissue engineering applications.     

A classification for incidents and accidents in the health-care system

Problems that arise from health-care management, rather than from a disease process, are now recognized as making a substantial contribution to patient morbidity and mortality and to the cost of health care. However, most classifications of these problems do not provide sufficient detail to allow comparisons or to develop better strategies for the prevention, detection and management of these problems. A 'Generic Occurrence Classification' was developed to record their salient features, place them in context and elicit any system or human error-based contributing factors. This was done by an iterative process in which 'natural categories', identified from over 2000 incidents and 800 adverse events, were placed in a hierarchical structure created using software written in Microsoft Visual Basic; data were stored in a Microsoft Access database. This was shown to be a valid and reliable way to compare incidents and accidents from different sources and to allow sufficient detail to be retrieved to develop preventive strategies.     

The BsmI vitamin D receptor restriction fragment length polymorphism (bb) influences the effect of calcium intake on bone mineral density

Previous studies of the vitamin D receptor (VDR) polymorphisms and bone mineral density (BMD) have suggested that there may be differences in calcium absorption among groups of women with different VDR genotypes, and that the association may be stronger in younger women. To investigate the association between the VDR polymorphisms and BMD, this study was undertaken in the Framingham Study Cohort and a group of younger volunteers. Subjects from the Framingham Study (ages 69-90 years) included those who underwent BMD testing and who had genotyping for the VDR alleles (n = 328) using polymerase chain reaction methods and restriction fragment length polymorphisms with BsmI (B absence, b presence of cut site). A group of younger volunteer subjects (ages 18-68) also underwent BMD testing and VDR genotyping (n = 94). In Framingham Cohort subjects with the bb genotype, but not the Bb or BB genotypes, there were significant associations between calcium intake and BMD at five of six skeletal sites, such that BMD was 7-12% higher in those with dietary calcium intakes greater than 800 mg/day compared with those with intakes < 500 mg/day. The data also suggested that BMD was higher in persons with the bb genotype only in the group with calcium intakes above 800 mg/day. No significant differences were found in the Framingham Cohort for age-, sex-, and weight-adjusted BMD at any skeletal site between those with the BB genotype and those with the bb genotype regardless of 25-hydroxyvitamin D levels or country of origin. In the younger volunteers, BMD of the femoral neck was 5.4% higher (p < 0.05) in the bb genotype group compared with the BB group and 11% higher (p < 0.05) in males with the bb genotype compared with the BB group. There were no significant differences at the lumbar spine. In this study, the association between calcium intake and BMD appeared to be dependent upon VDR genotype. The findings of an association between dietary calcium intake and BMD only in the bb genotype group suggests that the VDR genotype may play a role in the absorption of dietary calcium. Studies that do not consider calcium intake may not detect associations between VDR genotype and BMD. In addition, the association between VDR alleles and BMD may become less evident in older subjects.