Inside Front Cover: Towards See‐Through Displays: Fully Transparent Thin‐Film Transistors Driving Transparent Organic Light‐Emitting Diodes (Adv. Mater. 6/2006)

The first fully transparent organic light‐emitting diode (OLED) pixels, fabricated by integrating transparent OLEDs on top of transparent thin‐film transistors (TTFTs), are demonstrated on p. 738 by Riedl and co‐workers, and shown schematically on the inside cover. With an average transmittance of more than 70 % in the visible part of the spectrum (400–750 nm), the presented active pixels pave the way to the realization of fully transparent active matrix displays.     

Functional Projection: How Fundamental Social Motives Can Bias Interpersonal Perception.

Results from 2 experimental studies suggest that self-protection and mate-search goals lead to the perception of functionally relevant emotional expressions in goal-relevant social targets. Activating a self-protection goal led participants to perceive greater anger in Black male faces (Study 1) and Arab faces (Study 2), both out-groups heuristically associated with physical threat. In Study 2, participants' level of implicit Arab-threat associations moderated this bias. Activating a mate-search goal led male, but not female, participants to perceive more sexual arousal in attractive opposite-sex targets (Study 1). Activating these goals did not influence perceptions of goal-irrelevant targets. Additionally, participants with chronic self-protective and mate-search goals exhibited similar biases. Findings are consistent with a functionalist, motivation-based account of interpersonal perception. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The boundary finite element method for predicting directions of cracks emerging from notches at bimaterial junctions

The analysis of a bimaterial medium with various notch opening angles has been carried out using boundary finite element method (BFEM) under arbitrary loading conditions. Introduced as novel method for stress concentration problems at geometrical discontinuities, cracks, bimaterial notches etc., the BFEM has been proved as numerically highly efficient. This has become more and more important because wedge type construction creates stress concentrations which may lead to crack initiation in many practical situations where multi-layered composite material is used, e.g. within aerospace, ship or automobile structures. So, the computational prediction of potential directions for crack initiation is essential for the knowledge of weak regions. All the analysis results are based on the hypothesis of Erdogan and Sih and have been verified by the well established finite element method. Results for potential crack initiation angles of both homogeneous and bimaterial media are presented with multiple examples of different wedge angles and different loading combinations.     

Distributed computing for multidisciplinary design optimization using Java

The programming language Java (recently referred to as the computer language of the Web) offers substantial possibilities for the type of complex engineering problems typically encountered in multidisciplinary design optimization (MDO) problems. In order to demonstrate the potential uses of Java for MDO problems, this paper presents the development of the Web Interface for complex engineering design (WICkED) software, which simulates the convergence of a decomposed complex system in a distributed computing environment and computes the sensitivity derivatives of the system with respect to the independent input variables using the GSE method or the finite difference method. In this application, one computer is designated as the server and sends out required inputs to a number of client subsystems over the Internet. A number of client computers can connect to the server and then receive the inputs necessary to calculate the solution to their model. As the code necessary to solve the model already exists at the client, only the inputs have to be sent over the network. When the client has solved the calculation, it returns the results to the server which processes the result to produce new inputs.WICkED is written entirely in the Java programming language which allows server and clients to exist on completely different computer types and in heterogeneous, distributed networks. A number of parametric studies on the behaviour of complex systems in a distributed environment are performed and the results are reported in this paper. This research serves to identify potential problems as well as advantages in using Java for MDO applications.     

Heat transfer coefficients for forced-air cooling and freezing of selected foods

To maximize the efficiency of cooling and freezing operations for foods, it is necessary to optimally design the refrigeration equipment to fit the specific requirements of the particular cooling or freezing application. The design of food refrigeration equipment requires estimation of the cooling and freezing times of foods, as well as the corresponding refrigeration loads. The accuracy of these estimates, in turn, depends upon accurate estimates of the surface heat transfer coefficient for the cooling or freezing operation. This project reviewed heat transfer data for the cooling and/or freezing of foods. A total of 777 cooling curves for 295 food items were obtained from an industrial survey and a unique iterative algorithm, utilizing the concept of ‘equivalent heat transfer dimensionality’, was developed to obtain heat transfer coefficients from these cooling curves. Nine Nusselt–Reynolds–Prandtl correlations were developed from a selection of the 777 heat transfer coefficients resulting from this algorithm, as well as 144 heat transfer coefficients for 13 food items, collected from the literature. The data and correlations resulting from this project will be used by designers of cooling and freezing systems for foods. This information will make possible a more accurate determination of cooling and freezing times and corresponding refrigeration loads. Such information is important in the design and operation of cooling and freezing facilities and will be of immediate usefulness to engineers involved in the design and operation of such systems.     

Effective stiffness and microscopic deformation of an orthotropic plate containing arbitrary holes

Many engineering materials and structures, such as cellular structures, sandwich core structures and laminated plates with holes, can be modeled by an inclusion problem with anisotropic matrix. The paper studies the effective properties and the microscopic deformation of anisotropic plates with periodic holes by using direct and mathematical homogenization. The effective stiffnesses are calculated by different homogenization methods and the microscopic deformation of a RVE is modeled by the finite element method for the plate with arbitrarily shaped holes. All of the effective stiffness coefficients, especially stretching-shear coupling coefficients are evaluated.     

A simplified analysis of the effect of microstructure gradient on the stress relief of aluminum plates and extrusions

Many bulk forms of metal products are quenched after heat treatment in order to preserve material characteristics. Rapid quenching results in large thermal stress gradients that lead to high levels of residual stress. For products such as plates and extrusions, stretching by a few percent can reduce these stresses, but the stresses are not completely relieved. This report presents a simplified analytical model of the stress relief process illustrating the effects of through-thickness property gradients on residual stress after stretching. The basic conclusion is that for plates with uniform yield surface shapes through the thickness, the through-thickness residual stress range after stress relief is equal to the strength range in the direction of stretch. In extrusions, the bow after stress relief is proportional to this strength range. Cases are also considered in which the yield surface shapes range from isotropic to anisotropic through the thickness. Plastic anisotropy can perturb the effect of strength range on residual stress.     

The design of an electron gun switchable between immersed and Brillouin flow

An electron gun, which can be switched from immersed flow to Brillouin flow during operation, may have advantages for charge breeders as well as for electron beam ion sources and traps (EBISTs). For EBISTs this allows to change the current density according to the repetition frequency and charge state, for charge breeders and EBISTs a lower current density in immersed flow provides higher acceptance for injected ions, while the higher current density in Brillouin flow results in shorter breeding times and a lower emittance for the extracted beam. Therefore, we have designed such a gun for an EBIS with 5 T central magnetic field and without the use of iron and moving the gun. The gun was placed in the axial fringing field of the 5 T solenoid in such a position that a gate valve can be placed between the gun and the cryostat to allow for simple maintenance. The field at the cathode surface turned out to be only 0.05 T, which is not enough to focus 50 A∕cm(2) at a few kV. However, if a small normal conducting solenoid is placed over the vacuum tube in position of the gun, a field of 0.1 T may be obtained. With this the use of LaB(6) as cathode material results in a magnetic compression of 44 and therewith in a focused current density in the trap region of more than 2000 A∕cm(2). By reversing the current in the gun solenoid the cathode field can easily compensated to zero. By proper design of the electrodes and the compression region, the gun will be able to deliver a beam in Brillouin flow. While this is interesting by itself--remember the "super-compression" reported on CRYEBIS-I--any magnetic field between zero and the value for immersed flow will result in an electron beam with a wide range of adjustable high current densities. The design tools used have been INTMAG(C) for the calculation of magnetic fields, EGN2(C) for the simulation of the gun and ANALYSE(C) for detailed analysis of the results (for more information see www.egun-igun.com).