X-Ray Imaging Using LEKIDs

We present the detection of 5.9 keV X-rays in a silicon wafer utilising an array of frequency multiplexed Kinetic Inductance Detectors. The readout electronics consists of a programmable digital electronics with an integrated 12-bit ADC, operating with a maximum frequency of 100 MHz. We implement a lumped element geometry, realising pixels as small as possible in order to achieve better position resolution. The whole system allows the simultaneous readout of 14 pixels with a bandwidth of 300 kHz, but it is easily scalable up to 100 pixels. A higher bandwidth detection, with less pixels, allows the reconstruction of the photon absorption position in the substrate up to hundreds of microns. This technological development could be applied in the next future to large area X-Ray Imaging. A better understanding of high energy photon and particle detection is also crucial for the space implementation of LEKIDs for mm-astronomy, where data loss due to Cosmic particles could be a major issue.     

Sensors and observers in distributed parameter systems

Luenberger observer theory is extended to distributed parameter systems. This extension is based on the consideration of sensors. For systems with infinite dimensional state spaces, it is possible to construct the state vector asymptotically (or a part of the state vector) by a ‘good’ choice of sensors. We show that the link between detectability and sensor structure may be of some interest in the construction of observers.     

Infostations for highway cigar-shaped cells

An infostation is an isolated pocket area, with small coverage of high bandwidth connectivity, which collects information requests of mobile users and delivers data while users are going through the coverage area. In this paper, the performance of infostations networks with single, double and triple frequencies is studied. The two-slope propagation loss model is used to calculate the signal-to-interference plus noise ratio. The effect of the propagation parameters on the infostation performance is studied.     

N‐Benzyl‐4‐((heteroaryl)methyl)benzamides: A New Class of Direct NADH‐Dependent 2‐trans Enoyl–Acyl Carrier Protein Reductase (InhA) Inhibitors with Antitubercular Activity

Isoniazid (INH) remains one of the cornerstones of antitubercular chemotherapy for drug‐sensitive strains of M. tuberculosis bacteria. However, the increasing prevalence of multidrug‐resistant (MDR) and extensively drug‐resistant (XDR) strains containing mutations in the KatG enzyme, which is responsible for the activation of INH into its antitubercular form, have rendered this drug of little or no use in many cases of drug‐resistant tuberculosis. Presented herein is a novel family of antitubercular direct NADH‐dependent 2‐trans enoyl–acyl carrier protein reductase (InhA) inhibitors based on an N‐benzyl‐4‐((heteroaryl)methyl)benzamide template; unlike INH, these do not require prior activation by KatG. Given their direct InhA target engagement, these compounds should be able to circumvent KatG‐related resistance in the clinic. The lead molecules were shown to be potent inhibitors of InhA and showed activity against M. tuberculosis bacteria. This new family of inhibitors was found to be chemically tractable, as exemplified by the facile synthesis of analogues and the establishment of structure–activity relationships. Furthermore, a co‐crystal structure of the initial hit with the enzyme is disclosed, providing valuable information toward the design of new InhA inhibitors for the treatment of MDR/XDR tuberculosis.     

Design and realization of transparent solar modules based on luminescent solar concentrators integrating nanostructured photonic crystals

Herein, we present a prototype of a photovoltaic module that combines a luminescent solar concentrator integrating one‐dimensional photonic crystals and in‐plane CuInGaSe₂ (CIGS) solar cells. Highly uniform and wide‐area nanostructured multilayers with photonic crystal properties were deposited by a cost‐efficient and scalable liquid processing amenable to large‐scale fabrication. Their role is to both maximize light absorption in the targeted spectral range, determined by the fluorophore employed, and minimize losses caused by emission at angles within the escape cone of the planar concentrator. From a structural perspective, the porous nature of the layers facilitates the integration with the thermoplastic polymers typically used to encapsulate and seal these modules. Judicious design of the module geometry, as well as of the optical properties of the dielectric mirrors employed, allows optimizing light guiding and hence photovoltaic performance while preserving a great deal of transparency. Optimized in‐plane designs like the one herein proposed are of relevance for building integrated photovoltaics, as ease of fabrication, long‐term stability and improved performance are simultaneously achieved. © 2015 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.     

Plasma ignition threshold disparity between silver nanoparticle-based target and bulk silver target at different laser wavelengths

Plasma ignition threshold of nanoparticle-based and bulk silver targets was measured in air. The plasma was initiated by a Nd:YAG laser at wavelengths of 355, 532, and 1064 nm. The plasma ignition was monitored utilizing the prominent Ag I line at 546.5 nm. Lower ignition thresholds of the nanoparticle-based silver target were estimated at 0.4?±?0.02, 0.34?±?0.04, and 0.27?±?0.035 J cm~(-2) coupled with the different laser wavelengths, respectively. In contrast, the bulk silver target plasma exhibited an order of magnitude higher ignition threshold. A three orders of magnitude enhanced emission intensity from the nano-based target over the bulk target was achieved at lower levels of laser irradiation. A reduction of the thermal diffusion length of the nanosilver was assumed in order to theoretically predict this reduction in the plasma threshold. In addition, the effect of self-reversal on the resonance lines was taken into consideration.     

Depuration dynamics of viruses in shellfish

The consumption of shellfish has been associated with viral infections even in cases where shellfish complied with the current regulation, which is based on bacterial analysis. In this study, depuration rates of potential indicators and human viruses have been analysed in order to study the use of complementary parameters for evaluating the microbiological quality of depurated shellfish. Depuration of naturally highly polluted mussels has been evaluated and analyses for Escherichia coli, Clostridium perfringens, somatic coliphages, F-RNA phages and bacteriophages infecting Bacteroides fragilis RYC2056 and HSP40, human adenovirus, enterovirus have been done. Seawater of the depuration tank was disinfected by UV irradiation, ozone and passed through a skimmer and a biological filter. The correct functioning of the depuration tank was monitored by the quantification of total organic carbon (TOC), NH4+ and total aerobic bacteria in the seawater. To study the relation between the bacteriophages and the human viruses analysed, a logistic regression model was applied. F-RNA phages are significantly related to human adenoviruses and enteroviruses. Thus, they can be used as a complementary parameter for evaluating the efficiency of the depuration treatment. Somatic coliphages are also significantly associated with enteroviruses. Bacteriophages infecting B. fragilis HSP40 were analysed by the double-agar-layer (DAL) method, which quantifies infectious viruses, and by nested PCR, which detects the presence of the genome of these phages. The highest sensitivity of the molecular techniques was demonstrated and the results obtained are an indicator of a close relation between positive results by PCR and the presence of infectious viral particles in shellfish. All shellfish samples were negative for human viruses by PCR after 5 days of depuration treatment and the results obtained applying a regression model also showed negative results or nearly for F-RNA phages and bacteriophages infecting B. fragilis RYC2056. Thus, in this specific depuration treatment, 5 days may be necessary to assess the sanitary quality of shellfish.     

Mesostructured Thin Films as Responsive Optical Coatings of Photonic Crystals

A synthetic route is presented to attain high‐optical‐quality multilayered structures that result from coupling ordered mesoporous titanium oxide thin films to the surface of a dense one‐dimensional photonic crystal. Such architectures present spectrally well‐defined photon resonant modes localized in the outer coating that finely respond to physicochemically induced modifications of its pore volume. The potential of these porous coatings in detection of environmental changes through variations of the photonic response of the ensemble is demonstrated by performing isothermal optical reflectance measurements under controlled vapor‐pressure conditions.