Study of the suitability of clay slates of the Panteleimonov deposits for use in ceramic brick manufacture

Conclusions Laboratory investigations and factory experiments established the suitability of clay slates from the Panteleimonov deposits for the production of high-grade ceramic brick by dry pressing. On the basis of data obtained we developed and delivered to the Panteleimonov Refractories Factory a proposal for the design of a production line and technical process for making brick by the dry method based on clay slates of the Panteleimonov deposits.Translated from Ogneupory, No. 3, pp. 27–29, March, 1990.     

Use of computed radiography in the study of an historic painting

The authors demonstrate the use of radiography in the investigation of an historic painting and describe the potential benefits of computed radiography compared with conventional screen-film radiography. The subject for the comparison was a 16 x 19-foot oil-on-canvas painting, Scipio Africanus Freeing Massiva, by Giovanni Battista Tiepolo. Radiographs of the painting were obtained by using a portable, industrial radiographic unit and both conventional screen-film and photostimulable phosphor plate cassettes. For this investigation, computed radiography had a number of advantages over screen-film radiography, largely due to its wider dynamic range and its capabilities for enhancing the digital images with image processing tools such as magnification, edge enhancement, colorization, and airbrushing. The ability to electronically combine images from the large painting into a single composite image file was extremely valuable, as this technique was much less cumbersome and resulted in much higher quality composite images than could be achieved with conventional radiography. An additional advantage of computed radiography includes the capability to easily archive and transmit these images in a digital format for subsequent review.     

Human cytochrome P4502B6: interindividual hepatic expression, substrate specificity, and role in procarcinogen activation

In situ hybridization was combined with serotonin (5-hydroxytryptamine, 5-HT) or tyrosine hydroxylase immunocytochemistry and with Fluoro-Gold retrograde labeling of bulbo-spinal pathways in order to investigate the expression of GAP-43 mRNA in monoamine cell groups of the adult rat brain stem. Consistent with previous reports, GAP-43 mRNA was observed in serotonin and dopamine cell groups in the pons. In addition, GAP-43 expressing cells were observed in all the major monoamine cell groups in the medulla. Thus the B1, B2 and B3 serotonin cell groups all showed high GAP-43 expression in all contained many GAP-43 expressing serotonin cells with spinal cord projections. The A1, A2, A5 and A6 noradrenaline cell groups also showed high GAP-43 expression, although cells with spinal cord projections were largely restricted to the A5 group and A6 subcoeruleus region. In all areas, GAP-43 expressing cells with spinal cord projections were also observed which were not serotonergic or noradrenergic.     

Effects of pulsed ultrasound on the frog heart: III. The radiation force mechanism

Earlier studies have shown that a single, millisecond duration pulse of ultrasound delivered to the frog heart in vivo during systole can produce a reduction in the developed aortic pressure, while a pulse delivered during diastole can produce a premature ventricular contraction. The threshold for these effects is 5-10 MPa with a 5-ms pulse. Since cardiac tissues respond to mechanical stimulation, the objective of this study was to investigate acoustic radiation force as a possible mechanism for the observed effects of ultrasound on the frog heart. In two experiments, the radiation force exerted on the heart was varied by varying the ultrasonic frequency and the acoustic beam width. Results of these studies indicated that the rate of occurrence of the reduced aortic pressure effect was directly correlated with the magnitude of the radiation force exerted on the heart. A third experiment tested the radiation force mechanism directly by placing an acoustic reflector on the frog heart. The acoustic reflector maximized the radiation force delivered to the heart, but eliminated direct interaction of the ultrasound with the heart and experimentally eliminated heating and cavitation as mechanisms of action. The reduced aortic pressure effect was observed with the reflector on the heart, indicating that radiation force is capable of producing this effect. No premature ventricular contractions were observed with the acoustic reflector over the heart, suggesting that another property of the exposure may be responsible for this bioeffect.     

The 2-His-1-carboxylate facial triad--an emerging structural motif in mononuclear non-heme iron(II) enzymes

PURPOSE: To determine in-line pressures generated in small-bore central venous catheters during power injection of computed tomographic (CT) contrast media. MATERIALS AND METHODS: Five 3.0-7.0-F central venous catheters for pediatric patients were tested at full and half lengths in vitro. In-line pressures were measured during power injection of three contrast media. Rates of injection were increased in steps from 0.1 to 5.0 mL/sec or until a peak pressure of 100 psi (700 kPa) was achieved. The maximum tolerated flow rate was determined with reference to the manufacturer's suggested operating pressure limit for each catheter. RESULTS: At full length, the maximum tolerated flow rates were as follows: 2-3 mL/sec for the large lumen and 1-1.4 mL/sec for the small lumen of the 7.0-F double-lumen catheter; 0.2-0.4 and 0.8-1.2 mL/sec for the 3.0- and 4.0-F peripherally inserted central catheters, respectively; 0.7-1.2 mL/sec for the 6.6-F catheter; and only 0.2 mL/sec for the 4.2-F catheter, which ruptured during testing at higher flow rates. CONCLUSION: Flow rates were documented at which certain small-bore central venous catheters should tolerate power injection of CT contrast media with peak pressures remaining below the manufacturer's recommended operating pressure limits. These data may serve as a guide for clinical use.     

Malignant transformation of NIH3T3 cells by overexpression of mot-2 protein

The murine mortalin genes, mot-1 and mot-2, are members of the hsp70 family of proteins and differ from each other by only two amino acid residues. Mot-1 is expressed in normal cells and has pancytosolic cellular distribution whereas mot-2 is found in the perinuclear region of immortal cells. We report here that a high level of expression of mot-2 protein resulted in malignant transformation of cells as analysed by anchorage independent growth and nude mice assays. A high level of protein expression is attributed to the 900 bp 3' untranslated region of the cDNA which does not have any transforming activity per se. Mortalin cDNA clones isolated from human transformed cells were also found to have transforming activity in similar assays and a high level of expression was apparent in some of the human immortalized cells that showed non-pancytosolic mortalin immunofluorescence. Taken together, the data suggest that nonpancytosolic mortalin may have a role in tumorigenesis.     

Static and fatigue failure properties of thoracic and lumbar vertebral bodies and their relation to regional density

This study investigated (1) whether a characterization of the macroscopic architecture within the vertebral centrum would improve predictions of vertebral strength, (2) if regions in the centrum where least bone loss with age occurs are more predictive of vertebral strength, and (3) whether different patterns of the macroscopic architecture are predictive of static as compared to fatigue strength. To characterize the vertebral macroscopic architecture, a regional bone mineral density (rBMD) technique was used that estimated the cancellous density distribution (in 18 specific regions of the vertebral centrum) for vertebrae T7-L4, from spines of 20 female cadavers. Static and fatigue failure properties of whole vertebrae were obtained, and predictive models of static and fatigue failure properties of whole vertebrae were examined. We found that (1) vertebral failure properties were better predicted by combinations of vertebral regional cancellous density (multiple linear regressions) rather than by any individual region of cancellous density alone (simple linear regressions); (2) models using regions of density that demonstrated minimum decline with age [from the data of Flynn and Cody (Calcif. Tissue Int. 53, S170-S175 (1993))] resulted in better correlations with ex vivo vertebral static failure properties than models using density regions that showed maximum decline with age, and (3) static and fatigue characteristics required different density regions to reach significance. (A comparison of models predictive of static and fatigue failure properties revealed that anterior density regions were most often included in predictive models of the static properties while posterior regions were more predictive of the fatigue properties).(ABSTRACT TRUNCATED AT 250 WORDS)     

The Effect of Manufacturing Conditions on the Structure and Electrochemical Properties of Metallic Glasses Fe76.1Cu1.0Nb3.0Si13.8B6.1

By using x-ray diffraction analysis, small-angle x-ray scattering, resistometry, and electrochemical voltammetry, the effect of thermally pretreating the melt on the structure, as well as crystallization and electrochemical behavior, of rapidly quenched bands of an alloy Fe_76.1Cu_1.0Nb_3.0Si_13.8B_6.1 is investigated. It is shown that, by varying the production conditions of rapidly quenched alloys, one can substantially affect their amorphous-nanocrystalline structure and increase the corrosion resistance.