Electrocopolymerization kinetics of a binary mixture of 3‐chloroaniline 2‐amino‐4‐phenylthiazole and characterization of the obtained block copolymer films

Electrocopolymerization of a binary mixture of 3‐chloroaniline and 2‐amino‐4‐phenylthiazole on platinum electrode in acid medium was carried out under different reaction conditions such as temperature, current density, hydrochloric acid, and monomer concentrations with duration time. The initial rate of the electrocopolymerization reaction on platinum electrode is small and the rate law is R_p = K₂ [D]^1.29[HCl]^0.97[M]^1.94. The apparent activation energy is found to be 38.87 kJ/mol. The obtained copolymer film is characterized by ¹H‐NMR, elemental analysis, GPC IR, UV‐visible, and cyclic voltammetry and compared with those of the two homopolymers. The mechanism of the electrocopolymerization reaction is also discussed and the monomer reactivity ratio (r₁and r₂) is calculated. The thermogravimetric analysis (TGA) is used to confirm the proposed structure and determination of the number of water molecules in the polymeric chain unit. X‐ray and scanning electron microscopic analysis are used to investigate the surface morphology. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2076–2087, 2005     

The Efficacy of Fibrinogen Concentrates in Relation to Cryoprecipitate in Restoring Clot Integrity and Stability against Lysis

Loss of fibrinogen is a feature of trauma-induced coagulopathy (TIC), and restoring this clotting factor is protective against hemorrhages. We compared the efficacy of cryoprecipitate, and of the fibrinogen concentrates RiaSTAP^® and FibCLOT^® in restoring the clot integrity in models of TIC. Cryoprecipitate and FibCLOT^® produced clots with higher maximal absorbance and enhanced resistance to lysis relative to RiaSTAP^®. The fibrin structure of clots, comprising cryoprecipitate and FibCLOT^®, mirrored those of normal plasma, whereas those with RiaSTAP^® showed stunted fibers and reduced porosity. The hemodilution of whole blood reduced the maximum clot firmness (MCF) as assessed by thromboelastography. MCF could be restored with the inclusion of 1 mg/mL of fibrinogen, but only FibCLOT^® was effective at stabilizing against lysis. The overall clot strength, measured using the Quantra^® hemostasis analyzer, was restored with both fibrinogen concentrates but not cryoprecipitate. α₂antiplasmin and plasminogen activator inhibitor-1 (PAI-1) were constituents of cryoprecipitate but were negligible in RiaSTAP^® and FibCLOT^®. Interestingly, cryoprecipitate and FibCLOT^® contained significantly higher factor XIII (FXIII) levels, approximately three-fold higher than RiaSTAP^®. Our data show that 1 mg/mL fibrinogen, a clinically achievable concentration, can restore adequate clot integrity. However, FibCLOT^®, which contained more FXIII, was superior in normalizing the clot structure and in stabilizing hemodiluted clots against mechanical and fibrinolytic degradation.     

Processing and characterization of an Li7La3Zr0.5Nb0.5Ta0.5Hf0.5O12 high-entropy Li–garnet electrolyte

In this paper, we demonstrated the processing of Li₇La₃Zr_0.5Nb_0.5Ta_0.5Hf_0.5O₁₂ (LLZNTH) high-entropy Li–garnet with promising properties for lithium batteries. We first synthesized the LLZNTH Li–garnet powders which have a single cubic garnet phase (space group: $\text{◂⋅▸}Ia\overline{3}d$; No. 230) without any secondary phases as well as uniform elements distributions. The prepared powders were further densified to a relative density of ∼94% with well-crystallized grains and good contact with the neighboring grains. Minimal grain growth can be observed in the sintering time range from 8 to 20 h, which is likely due to the sluggish effects of high-entropy compounds. The sample also maintains the cubic garnet phase along with uniform elements distribution after sintering. Electrochemical characterizations indicate that the densified sample has an adequate ionic conductivity of 4.67 × 10⁻⁴ S cm⁻¹ at room temperature, a low activation energy of 0.25 eV, and a low electronic conductivity in the order of 10⁻⁸ S cm⁻¹. The significance of designing high-entropy electrolyte is further discussed.     

Reducing the energy cost of protective anodizing

Minimizing the carbon footprint of electrochemical processes is an emerging challenge for electrochemists and engineers. Here, a knowledge-based methodology for development of protective anodizing cycles for aluminium alloys, enabling simultaneous tuning of electrolyte concentration, composition, temperature and process time for reduced energy consumption is presented. In order to achieve the anticorrosion properties, the morphology of the porous anodic oxides is optimized by applying advanced potential-time regimes and additions of environmentally, friendly corrosion inhibitors to the anodizing electrolyte to provide additional active protection. The anticorrosion performance of the porous anodic oxides is assessed rapidly by electrochemical noise analysis, with the electrochemical data validated by optical and electron-optical observations.     

Exploring the unique pharmacology of a novel opioid receptor, ZFOR1, using molecular modeling and the `message-address' concept

Previous studies have probed the structural basis of ligandselectivity in the mu, delta and kappa opioid receptors throughthe application of molecular modeling techniques in concertwith the `message–address' concept. Here, this approachwas used in an attempt to rationalize the unique pharmacologicalprofile of a recently cloned novel opioid receptor, ZFOR1 (ZebraFishOpioid Receptor 1). Specifically, a model of the transmembranedomains of ZFOR1 was constructed and used to explore the bindingmodes of various prototypical opioid ligands. The results showthat the `message' portion of the binding pocket of ZFOR1 ishighly conserved; hence, the binding modes of non-selectiveopioid ligands are well preserved. In contrast, a small numberof variant residues at the extracellular end of the bindingpocket, particularly Lys288 (VI:26) and Trp304 (VII:03), areshown to create adverse steric interactions with all delta andkappa selective ligands examined, thereby disrupting their bindingmodes. These results are consistent with, and serve as an explanationfor, the observed pharmacology of this receptor, lending supportto both the validity of the `message–address' conceptitself and to the use of molecular modeling approaches in itsapplication.     

Impact of Brownian motion on the particle settling in molten metals

Understanding the settling behavior of nanoparticles in molten metals/alloys is important as it will aid in achieving uniform dispersions of reinforcement particles in metal matrix nanocomposites. Uniform dispersions are necessary to activate the Orowan strengthening mechanism, which can increase yield strength without significant diminishment of ductility. In this work, an analytical model of particle size effects on settling is described that takes into account both deterministic Stokes’ law and stochastic Brownian motion. The model shows a clear transitional behavior where settling velocity follows Stokes’ law for large particles and then drops to zero for small particles implying that Brownian motion predominates. It indicated that, in the Brownian motion regime, where the discrete nature of the liquid must be considered, the random motion imparted by unbalanced collisions can overwhelm the motions normally imposed by forces such as gravity, viscous drag, and thermal/concentration gradients.     

Short-term maternal psychological stress in the post-conception period in ewes affects fetal growth and gestation length

Fetal development can be influenced by maternal environment in the peri-conceptional period. This study investigated the effect of maternal feed intake and psychological stress within the first 6 days after conception on embryo development and fetal growth. Superovulated ewes (n=40) were artificially inseminated with semen from one ram. Ewes were then divided into four groups (n=10): group 1 (control) was fed at maintenance level, group 2 (high) at 2x maintenance, and group 3 (low) at 0.5x maintenance on days 2-6 after conception. Group 4 (stress) was fed at maintenance level and then an intense physical and psychological stress challenge was applied for 1 h only on days 2 and 3 after conception. Embryos were recovered at day 6. A total of 113 transferable grade embryos were transferred singly into synchronized untreated recipients, while the remaining embryos (n=165) were fixed and stained for cell counts. Post-conception maternal stress or feed intake did not alter the cell count or grade of day 6 embryos. Fetuses from the stress group had longer crown-rump lengths at day 30 and longer femur length at day 58. Fetuses from the stressed and high feed groups had greater abdominal circumferences at day 85. Subsequent birth weights were not significantly different. Ewes carrying lambs from the stress treatment had shorter gestation lengths. These results show that short-term perturbations of the post-conception maternal environment have measurable effects on fetal development and gestation length.     

A model laboratory system to study the synergistic interaction and growth of environmental Escherichia coli with macrophytic green algae

Escherichia coli, an important fecal indicator bacterium, is known to persist and reproduce in association with Cladophora and other macrophytic algae and environmental substrates. Recent increases in the growth of Cladophora and other macrophytic algae in many of the Laurentian Great Lakes result in the accumulation of large amounts of algal biomass along the shoreline and on beaches. While the Cladophora–E. coli association may pose substantial public health risks, detailed laboratory-based studies have not been done to investigate the bases of the interaction. This is due, in large part, to past inabilities to culture many macrophytic algae under near axenic conditions. Here we describe the development and experimental use of laboratory microcosms to study the synergistic interaction and growth of the green alga Pithophora, a close relative of Cladophora, with environmental E. coli. In the absence of exogenous organic carbon supply, the E. coli population attached to algal filaments increased approximately three orders of magnitude within 72 h of inoculation. Growth of E. coli on Pithophora appeared to be limited by dissolved nitrogen with a concentration of ≥ 66 μg/mL N allowing maximal bacterial growth. In contrast, an environmental strain of Salmonella did not grow under identical conditions in the microcosms, suggesting that this bacterium requires additional growth factors not provided by Cladophora. Since the alga can be maintained in the laboratory for long periods of time, this system allows for further experimentation and understanding of macroalga–microbe interactions.     

Towards a mature offshore wind energy technology—guidelines from the opti‐OWECS project

The article reviews the main results of the recent European research project Opti‐OWECS (‘Structural and Economic Optimisation of Bottom‐Mounted Offshore Wind Energy Converters'), which has significantly improved the understanding of the requirements for a large‐scale utilization of offshore wind energy. An integrated design approach was demonstrated for a 300 MW offshore wind farm at a demanding North Sea site. Several viable solutions were obtained and one was elaborated to include the design of all major components. Simultaneous structural and economic optimization took place during the different design stages. An offshore wind energy converter founded on a soft–soft monopile was tailored with respect to the distinct characteristics of dynamic wind and wave loading. The operation and maintenance behaviour of the wind farm was analysed by Monte Carlo simulations. With an optimized maintenance strategy and suitable hardware a high availability was achieved. Based upon the experience from the structural design, cost models for offshore wind farms were developed and linked to a European database of the offshore wind energy potential. This enabled the first consistent estimate of cost of offshore wind energy for entire European regions. Copyright © 1999 John Wiley & Sons, Ltd.     

Biogeochemistry of nonylphenol ethoxylates in urban estuarine sediments

We have examined the concentrations and distributions of nonylphenol ethoxylate (NPEO) surfactants and their primary neutral metabolites in two dated sediment cores collected in 1988 and 1996 from a depositional area proximal to a wastewater treatment plant within Jamaica Bay, NY. Total NPEO concentrations ranged from >50 microg/g near the surface (4-6 cm, deposited ca. 1990) to below detection limits (<0.1 microg/g) at 50 cm depth (deposited ca. 1940). The general decrease in NPEO concentrations with increasing depth in sediment reflected increased commercial use of these compounds over the last 50 yr. NPEO ethoxymer distributions in recent sediments were dominated by NP(0-3)EO, consistent with the increased relative input of these particular ethoxymers to the estuary following the upgrade of local biological sewage treatment processes to full activated sludge in the late 1970s. NPEO ethoxymer profiles in deeper sediments were characterized by relatively higher proportions of unmetabolized, highly ethoxylated NPEOs. Depth profiles of NP1EO and NP in the upper portion of the sediment core showed evidence for in situ diagenetic conversion of NP1EO to NP. However, comparison of NPEO concentrations in selected strata from the core collected in 1996 with those in matched strata from a core collected from the same location in 1988 provided no evidence for in situ degradation of total NPEOs during the elapsed 8 yr between collection dates.