Analyses of structurally modified quasi‐solid‐state electrolytes using electrochemical impedance spectroscopy for dye‐sensitized solar cells

Electrochemical properties of structurally modified quasi‐solid‐state electrolytes were examined using porous substrates (PSs). The PS was prepared into two categories by a phase inversion method with a brominated poly(phenylene oxide) (BPPO): the sponge and finger types. Effects of the humidification and cosolvent compositions on the morphology of the PS were analyzed by scanning electron microscopy. In all cases of the PSs, a higher V_OC was observed of about 0.1 V than that of a liquid electrolyte owing to a suppressed back electron charge transfer. In addition, the PS prepared by the polymer solution of 1 : 4 : 1 (BPPO : N‐methyl‐2‐pyrrolidone : butyl alcohol) with the humidification process showed better photovoltaic properties in terms of the current density and conversion efficiency owing to the appropriate combinations of pore size, tortuosity, and interconnectivity. Effects of the pore structures were intensively examined using electrochemical impedance spectroscopy. The impedance results revealed that large pores at the surface layers are advantageous for a lower R_S and R_TiO2. Meanwhile, the straight inner structure is beneficial for the facile I^?/I₃^? diffusion, thus lowering R_Pt. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39739.     

可回收式锥形肝静脉支架的动物实验研究

【摘要】 目的 通过动物实验评估可回收式锥形肝静脉支架的可行性、安全性及稳定性,探讨支架回收最佳时间。方法 健康家猪24头,随机分为4组,每组6头。全身麻醉下经右颈内静脉入路接受肝中静脉可回收式锥形支架置入术,术后3、7、11、15 d分别接受支架回收。采用t检验对比各组支架置入后、回收前所测得的支架内血流压力变化差异。采集支架中段相邻血管组织标本作病理学检查,测量计算新生血管内膜厚度,单因素方差分析对比各组间新生内膜厚度差异。结果 24枚支架均成功置入,技术成功率100%;支架回收技术成功率为50%（12/24）。肝中静脉内压力测量显示,3 d组支架置入后与回收前比较,差异无统计学意义（P＞0.05）;7 d组、11 d组、15 d组支架置入后与回收前比较,差异有统计学意义（P＜0.05）。各组间支架中段相邻组织新生内膜平均厚度两两比较,差异均有显著统计学意义（F＝338.29,P＜0.001）。结论 可回收式锥形支架置入家猪肝静脉安全、可行,其最佳安全回收时间为3 d,最长不宜超过7 d。

     

高精度伺服系统基于Pade近似的数字前馈控制器

针对指令超前信息未知的情况,提出一种基于Pade近似原理的数字前馈控制器。以某电机伺服系统为例进行仿真,结果表明了本控制器的有效性。     

New concepts for lithium minerals processing

A new concept for the enrichment of lithium minerals is offering higher purity and higher yield by applying new processing technologies addressing the specific properties of the pegmatitic host rock. Additional value is created from high quality by-products which will improve the sustainability of mining activity and the overall cost base. Within the new concept, flotation may even be avoided where wet separation techniques are not applicable.Two innovative processing technologies have been integrated in the new concept: electrodynamic fragmentation and optical sorting. Detailed results of lab-technical tests show that the new process design can achieve highly selective liberation and separation processes. Optical and mineralogical analyses of the test products indicate a high benefit for commercial applications.     

Monte Carlo Simulation of Massive Absorbers for Cryogenic Calorimeters

There is a growing interest in cryogenic calorimeters with macroscopic absorbers for applications such as dark matter direct detection and rare event search experiments. The physics of energy transport in calorimeters with absorber masses exceeding several grams is made complex by the anisotropic nature of the absorber crystals as well as the changing mean free paths as phonons decay to progressively lower energies. We present a Monte Carlo model capable of simulating anisotropic phonon transport in cryogenic crystals. We have initiated the validation process and discuss the level of agreement between our simulation and experimental results reported in the literature, focusing on heat pulse propagation in germanium. The simulation framework is implemented using Geant4, a toolkit originally developed for high-energy physics Monte Carlo simulations. Geant4 has also been used for nuclear and accelerator physics, and applications in medical and space sciences. We believe that our current work may open up new avenues for applications in material science and condensed matter physics.     

Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloy

An experimental study was conducted to characterize the heat affected zone produced when laser heating a Ti6Al4V alloy plate workpiece. The emissivity and absorptivity of the Ti6Al4V alloy were determined experimentally. A 3D transient finite element method for a moving Gaussian laser heat source was developed to predict the depth and width of the heat affected zone on the Ti6Al4V alloy workpiece. There was a close correlation between the experimental data and the simulation results. It was found that the depth and width of the heat affected zone were strongly dependent on the laser parameters (laser power, laser scan speed, the angle of incidence and the diameter of the laser spot) and material properties (thermal conductivity, specific heat and density). Parametric studies showed that the depth and width of the heat affected zone increased with an increase in the laser power and decreased with an increase of the laser spot size and the laser scan speed. The thermal model can be used to determine the laser parameters for a given cut geometry that will yield no residual heat affected zone in the material after cutting. This provides the basis to optimize and improve laser assisted machining technique.     

Sympathetic response to stimulation of the pontine A5 region in conscious rabbits

OBJECT: This study is a retrospective analysis of clinical data obtained in 28 patients affected by obstructive hydrocephalus who presented with signs of midbrain dysfunction during episodes of shunt malfunction. METHODS: All patients presented with an upward gaze palsy, sometimes associated with other signs of oculomotor dysfunction. In seven cases the ocular signs remained isolated and resolved rapidly after shunt revision. In 21 cases the ocular signs were variably associated with other clinical manifestations such as pyramidal and extrapyramidal deficits, memory disturbances, mutism, or alterations in consciousness. Resolution of these symptoms after shunt revision was usually slow. In four cases a transient paradoxical aggravation was observed at the time of shunt revision. In 11 cases ventriculocistemostomy allowed resolution of the symptoms and withdrawal of the shunt. Simultaneous supratentorial and infratentorial intracranial pressure recordings performed in seven of the patients showed a pressure gradient between the supratentorial and infratentorial compartments, with a higher supratentorial pressure before shunt revision. Inversion of this pressure gradient was observed after shunt revision and resolution of the gradient was observed in one case after third ventriculostomy. In six recent cases, a focal midbrain hyperintensity was evidenced on T2-weighted magnetic resonance imaging sequences at the time of shunt malfunction. This rapidly resolved after the patient underwent third ventriculostomy. CONCLUSIONS: It is probable that in obstructive hydrocephalus, at the time of shunt malfunction, the development of a transtentorial pressure gradient could initially induce a functional impairment of the upper midbrain, inducing upward gaze palsy. The persistence of the gradient could lead to a global dysfunction of the upper midbrain. Third ventriculostomy contributes to equalization of cerebrospinal fluid pressure across the tentorium by restoring free communication between the infratentorial and supratentorial compartments, resulting in resolution of the patient's clinical symptoms.