雷达寻的制导半实物仿真误差研究

在介绍雷达寻的制导控制基本原理、半实物基本方法及仿真原理的基础上,详细介绍了雷达寻的制导控制半实物仿真系统的组成、各关键设备的工作原理并进行了主要误差因素分析,同时对关键仿真设备的误差进行研究,并建立数学模型,进一步推导出此类雷达仿真系统具有一般意义的仿真误差模型.最后通过型号半实物仿真试验对仿真系统的仿真精度进行验证.仿真试验表明,该半实物仿真系统的仿真精度满足控制系统半实物仿真试验的要求.     

Pulmonary delivery of nanoparticles of insoluble, iodinated CT X-ray contrast agents to lung draining lymph nodes in dogs

Lung cancer continues to be a leading cause of death around the world. Staging of this disease is critically dependent upon the involvement or noninvolvement of the lymph nodes which drain the region of lung containing the lesion/tumor. Palpation, unenhanced CT, and lymph node excision (i.e., mediastinectomy) are currently used to ascertain the status of these regional draining lymph nodes. The work reported herein details the first efforts toward the pulmonary instillation of iodinated nanoparticles for contrast-enhanced CT of lung draining lymph nodes. The data reflect the impact of dose, time post instillation, and formulation (surfactant) upon the observed CT enhancement of the tracheobronchial lymph nodes of beagle dogs. In addition, initial safety is discussed with both macroscopic and microscopic observations. The results indicate that pulmonary instillation of small volumes of iodinated nanoparticles could be successfully used to aid staging of lung cancer by CT imaging.     

Strategies for positioning fluorescent probes and crosslinkers on formyl peptide ligands

Chemoattractant receptors represent a major subset of the G-protein coupled receptor (GPCR) family. One of the best characterized, the N-formyl peptide receptor (FPR), participates in host defense responses of neutrophils. The features of the ligand which regulate its interaction with the FPR are well-known. By manipulating these features we have developed new ligands to probe structural and mechanistic aspects of the peptide-receptor interaction. Three ligand groups have been developed: 1) ligands containing a Lys residue located in positions 2 through 7 that can be conjugated to FITC (N-formyl-Met1-Lys2-Phe3-Phe4, N-formyl-Met1-Leu2-Lys3-Phe4, N-formyl-Met1-Leu2-Phe3-Lys4, N-formyl-Met1-Leu2-Phe3-Phe4-Lys5, N-formyl-nLeu1-Leu2-Phe3-nLeu4-Tyr5-Lys6 and N-formyl-Met1-Leu2-Phe3-Phe4-Gly5-Gly6-Lys7; 2) fluorescent pentapeptide ligands (N-formyl-Met-X-Phe-Phe-Lys(FITC) where X = Leu, Ala, Val or Gly); and 3) small crosslinking ligands where the photoaffinity crosslinker 4-azidosalicylic acid (ASA) was conjugated to Lys in positions 3 and 4 and p-benzoyl-phenylalanine (Bpa) was located in position 2 in N-formyl-Met1-Bpa2-Phe3-Tyr4. The peptides were characterized according to activity and affinity in human neutrophils and cell lines transfected with FPR. All of the peptides were agonists, with parallel affinity and activity. In the first group, the peptide activity decreases as Lys is placed closer to the N-formyl group and the activity is improved by 1-3 orders of magnitude by conjugation with FITC. In the second group, the dissociation rate of the peptide from the receptor increases as position 2 is replaced by aliphatic amino acids with smaller alkyl groups. In the third group, crosslinking ligands remain biologically active, display nM affinity and covalently label the FPR.     

A Golgi localization signal identified in the Menkes recombinant protein

Menkes disease arises from a genetic impairment in copper transport. The gene responsible for the phenotype has been identified as a copper transporting ATPase ( ATP7A ). Recently, the protein encoded by the ATP7A gene has been localized to the Golgi complex. In order to investigate the role of the Menkes disease protein in copper transport, recombinant constructs containing both the full-length open reading frame and an alternatively spliced form have been successfully expressed and localized in mammalian cells. Other studies of a patient with occipital horn syndrome, an allelic variant of Menkes disease, have demonstrated that only this alternatively spliced isoform and not the full-length form is expressed in this patient. The milder form of this patient's phenotype suggests that the alternatively spliced isoform has some functional role in copper transport. In the present study the full-length recombinant Menkes protein was shown by immunofluorescence to localize to the Golgi apparatus and the alternatively spliced form, lacking sequences for transmembrane domains 3 and 4 encoded by exon 10, was shown to localize to the endoplasmic reticulum. Using sequences from exon 10 fused to a non-Golgi reporter molecule, a 38 amino acid sequence containing transmembrane domain 3 of the Menkes protein was found to be sufficient for localization to the Golgi complex. Therefore, the protein sequence encoded by exon 10 may be responsible for this differential localization and both isoforms may be required for comprehensive transport of copper within the cell.     

Context-dependent nature of destabilizing mutations on the stability of FKBP12

The context-dependent nature in which mutations affect protein stability was investigated using the FK506-binding protein, FKBP12. Thirty-four mutations were made at sites throughout the protein, including residues located in the hydrophobic core, the beta-sheet, and the solvent-exposed face of the alpha-helix. Urea-induced denaturation experiments were used to measure the change in stability of the mutants relative to that of the wild type (Delta DeltaGU-F). The results clearly show that the extent of destabilization, or stabilization, is highly context-dependent. Correlations were sought in order to link Delta DeltaGU-F to various structural parameters. The strongest correlation found was between Delta DeltaGU-F and N, the number of methyl(ene) groups within a 6 A radius of the group(s) deleted. For mutations of buried hydrophobic residues, a correlation coefficient of 0.73 (n = 16,where n is the number of points) was obtained. This increased to 0.81 (n = 24) on inclusion of mutations of partially buried hydrophobic residues. These data could be superimposed on data obtained for other proteins for which similarly detailed studies have been performed. Thus, the contribution to stability from hydrophobic side chains, independent of the extent to which a side chain is buried, can be estimated quantitatively using N. This correlation appears to be a general feature of all globular proteins. The effect on stability of mutating polar and charged residues in the alpha-helix and beta-sheet was also found to be highly context-dependent. Previous experimental and statistical studies have shown that specific side chains can stabilize the N-caps of alpha-helices in proteins. Substitutions of Ile56 to Thr and Asp at the N-cap of the alpha-helix of FKBP12, however, were found to be highly destabilizing. Thus, the intrinsic propensities of an amino acid for a particular element of secondary structure can easily be outweighed by tertiary packing factors. This study highlights the importance of packing density in determining the contribution of a residue to protein stability. This is the most important factor that should be taken into consideration in protein design.     

Colosplenic fistula in a patient treated with interleukin-2 for malignant melanoma

Interleukin-2 (IL-2) therapy often causes gastrointestinal side effects and at least 8 cases of bowel perforation have been reported. The patient reported here developed a colosplenic fistula, diagnosed by CT, with no neoplastic involvement of these organs. Awareness of these complications of IL-2 can help lead to earlier diagnosis.     

Autologous versus allogeneic T cell-stimulated IL-6 production by dermal fibroblasts

T cells adhere to human dermal fibroblasts (HDF). This cellular interaction leads to a pronounced secretion of the proinflammatory cytokines IL-6 and IL-8 via a juxtacrine stimulation induced by HDF-associated IL-1. Upon stimulation, fibroblasts express various surface proteins such as MCH-I molecules, which may interact with corresponding receptors on T cells. The present study was conducted to further investigate the mechanism of this complex interaction with regard to the secretion of IL-6 in cocultures of T cells and HDF. IL-6 was time- and dose-dependently upregulated in such cocultures. Spatial separation of the cells by microporous membranes resulted in a 90% reduction of IL-6 secretion, but when cells had limited cell contact IL-6 secretion was increased again. Allogeneic cocultures of T cells and HDF showed increased capacity of IL-6 stimulation as compared to autologous cultures. Our results suggest that MHC-I/T cell receptor interaction modulates IL-6 secretion in allogeneic and autologous cocultures.     

Fabrication of core–shell nanocomposites with enhanced photocatalytic efficacy

The current study establishes the unprecedented involvement in the evolution and production of novel core–shell nanocomposites composed of nanosized titanium dioxide and aniline‐o‐phenylenediamine copolymer. TiO₂@copoly(aniline and o‐phenylenediamine) (TiO₂@PANI‐o‐PDA) core–shell nanocomposites were chemically synthesized in a molar ratio of 5:1 of the particular monomers and several weights of nano‐TiO₂ via oxidative copolymerization. The construction of the TiO₂@PANI‐o‐PDA core–shell nanocomposites was ascertained from Fourier transform IR spectroscopy, UV–visible spectroscopy and XRD. A reasonable thermal behavior for the original copolymer and the TiO₂@PANI‐o‐PDA core–shell nanocomposites was investigated. The bare PANI‐o‐PDA copolymer was thermally less stable than the TiO₂@PANI‐o‐PDA nanocomposites. The core–shell feature of the nanocomposites was found to have core and shell sizes of 17 nm and 19–26 nm, respectively. In addition, it was found that the addition of a high ratio of TiO₂ nanoparticles increases the electrical conductivity and consequently lowers the electrical resistivity of the TiO₂@PANI‐o‐PDA core–shell nanocomposites. The hybrid photocatalysts exhibit a dramatic photocatalytic efficacy of methylene blue degradation under solar light irradiation. A plausible interpretation of the photocatalytic degradation results of methylene blue is also demonstrated. Our setup introduces a facile, inexpensive, unique and efficient technique for developing new core–shell nanomaterials with various required functionalities and colloidal stabilities. © 2018 Society of Chemical Industry