The effect of glycosaminoglycan depletion on the friction and deformation of articular cartilage

Glycosaminoglycans (GAGs) have been shown to be responsible for the interstitial fluid pressurization of articular cartilage and hence its compressive stiffness and load-bearing properties. Contradictory evidence has been presented in the literature on the effect of depleting GAGs on the friction properties of articular cartilage. The aim of this study was to investigate the effect of depleting GAGs on the friction and deformation characteristics of articular cartilage under different tribological conditions. A pin-on-plate machine was utilized to measure the coefficient of friction of native and chondroitinase ABC (CaseABC)-treated articular cartilage under two different models: static (4 mm/s start-up velocity) and dynamic (4 mm/s sliding velocity; 4 mm stroke length) under a load of 25 N (0.4 MPa contact stress) and with phosphate-buffered saline as the lubricant. Indentation tests were carried out at 1 N and 2 N loads (0.14 MPa and 0.28 MPa contact stress levels) to study the deformation characteristics of both native and GAG-depleted cartilage samples. CaseABC treatment rendered the cartilage tissue soft owing to the loss of compressive stiffness and a sulphated-sugar assay confirmed the loss of GAGs from the cartilage samples. CaseABC treatment significantly increased (by more than 50 per cent) the friction levels in the dynamic model (p < 0.05) at higher loading times owing to the loss of biphasic lubrication. CaseABC treatment had no effect on friction in the static model in which the cartilage surfaces did not have an opportunity to recover fluid because of static loading unlike the cartilage tissue in the dynamic model, in which translation of the cartilage surfaces was involved, ensuring effective biphasic lubrication. Therefore the depletion of GAGs had a smaller effect on the coefficient of friction for the static model. Indentation tests showed that GAG-depleted cartilage samples had a lower elastic modulus and higher permeability than native tissue. These results corroborate the role of GAGs in the compressive and friction properties of articular cartilage and emphasize the need for developing strategies to control GAG loss from diseased articular cartilage tissue.     

Parameter adaptation for generalized multiframe tasks: schedulability analysis,case study,and applications to self-suspending tasks

The generalized multiframe task model (GMF) extends the sporadic task model and multiframe task model. Each frame in the GMF model contains an execution time, a relative deadline, and a minimum inter-arrival time. These parameters are fixed after task specification time in the GMF model. However, multimedia and adaptive control systems may be overloaded and no longer stabilized when the task parameters in such systems are not flexible. In order to address this problem, deadlines and periods of frames may change to alleviate temporal overload, e.g., in the parameter adaptation and elastic scheduling model. In this paper, we propose a new model GMF-PA (the GMF model with parameter adaptation). This model allows task parameters to be flexible in arbitrary-deadline systems. A necessary schedulability test based on mixed-integer linear programming is given to check the schedulability under EDF scheduling and optimally assign frame deadlines and periods at the same time. We also prove that the test is a sufficient and necessary schedulability test when frame deadlines and periods must be integers. An approximation algorithm is also deployed to reduce computational running time and indicates a sufficient schedulability test in general. The speed-up factor of our approximation algorithm is \(1+\epsilon \) where \(\epsilon \) can be arbitrarily small, with respect to the exact schedulability test of GMF-PA tasks under EDF. We also apply the GMF model to self-suspending tasks. By extending recent work on scheduling self-suspending tasks, we remove the assumption that frame deadlines are equally assigned in self-suspending tasks, and the system is extended from constrained-deadline systems to arbitrary-deadline systems. We have done extensive experiments to show that the schedulability ratio is improved using our techniques in our GMF-PA model.     

Isolation and characterisation of pectic substances from murta (Ugni molinae Turcz) fruits

Cell walls polysaccharides from murta fruit (Ugni molinae Turcz), an endemic Chilean species with relevant food uses, were fractionated by water, ammonium oxalate, hot diluted HCl and cold diluted NaOH extractions. The polysaccharide fractions were analysed for monosaccharide composition and physicochemical properties. Pectic substances were found in all extracts, but mainly in the oxalate and acid soluble fractions, in which they appear as homogalacturonan polymers. Murta pectin was further extracted by hot diluted acid treatment using industrial conditions, yielding 30% by weight of dry fruit. The polymer showed similar composition and physicochemical properties to those of commercial citrus pectin, presenting a galacturonic acid content of 70.9% (w/w), a molecular weight of 597 kDa, and a methoxylation degree of 57%. The FT-IR spectrum of murta pectin suggests the presence of ferulic acid residues on its structure and the NMR analysis confirmed the structure of this polysaccharide. It is concluded that murta fruit can be considered as a valuable source of high quality pectin.     

Some pharmacokinetic parameters of doxycycline in east African goats after intramuscular administration of a long-acting formulation

A compartmental and non-compartmental study was carried out on five adult goats following intramuscular administration of doxycycline at 20 mg/kg bodyweight. The concentration of the drug in serum was determined by a microbiological assay employing Bacillus cereus var mycoides (ATCC 11778) as the test organism. The mean serum concentration (Cmax) and the time of maximum concentration (Tmax) were 1.87 micrograms/ml and 0.85 h, respectively. Using compartmental analysis, the plasma concentration-time curve of doxycycline best fitted a three-compartment open model with first-order absorption. A three-phase disposition of doxycycline was found, the terminal elimination half-life being approximately 40 h. The statistical moment theory was mainly used for non-compartmental analysis. The value obtained for the mean residence time (MRT) was 16.4 h. The mean values for the volume of distribution at steady state (Vdss), determined by compartmental and non-compartmental analyses, were 8.73 and 13.19 L/kg, respectively. There were no statistically significant differences when the major pharmacokinetic parameters were compared. It was concluded that the pharmacokinetic behaviour of doxycycline in goats after intramuscular administration is characterized by a three-compartment model with a slow terminal elimination phase. Based on current knowledge, this could be due to enterohepatic recycling and/or flip-flop kinetics. The study indicated that a single intramuscular administration of 20 mg/kg of doxycycline may only provide therapeutic concentrations for up to 24 h owing to slow absorption at the injection site.     

Telemetry Application in the Glass Industry

Telemetry technique and presently available equipment may be utilized to optimize information retrieval speed and to minimize the total cost of information. An example of equipment is presented with basic theory of operation. Specific applications are discussed in the areas of pressure, temperature, and strain measurement. Technique is reviewed in terms of antenna placement and heat shielding of the telemetry package. By use of the systems approach to information retrieval, telemetry technique can be of value to the glass industry where other methods of measurement are not optimum or applicable.     

Promotion Routes for Women Engineering Managers

ABSTRACT

Total quality management (TQM) has been increasingly accepted as a management philosophy. Criteria such as those contained in the Malcolm Baldrige National Quality Award (MBNQA) often guide TQM implementation. However, reports indicate that fully assessing TQM efforts is difficult and hiring experts to help with this task is expensive. Using survey instruments is an attractive alternative to full-scale assessment. Despite the availability of many papers covering organizational performance assessment, few instruments specifically address TQM evaluation. Furthermore, none of the TQM assessment instruments has been subjected to rigorous validation; thus, only modest confidence can be placed in results obtained from their use. This article proposes a quick and cost-effective instrument that is a simple questionnaire designed to assist organizations in conducting self-evaluations of their TQM programs. The proposed instrument is based on the seven categories of the MBNQA criteria and was developed in cooperation with the Excellence in Missouri Foundation, which administers the Missouri Quality Award (MQA). This article highlights how questionnaire results can be used to guide further TQM implementation efforts.     

Logic programming to predict cell fate patterns and retrodict genotypes in organogenesis

Caenorhabditis elegans vulval development is a paradigm system for understanding cell differentiation in the process of organogenesis. Through temporal and spatial controls, the fate pattern of six cells is determined by the competition of the LET-23 and the Notch signalling pathways. Modelling cell fate determination in vulval development using state-based models, coupled with formal analysis techniques, has been established as a powerful approach in predicting the outcome of combinations of mutations. However, computing the outcomes of complex and highly concurrent models can become prohibitive. Here, we show how logic programs derived from state machines describing the differentiation of C. elegans vulval precursor cells can increase the speed of prediction by four orders of magnitude relative to previous approaches. Moreover, this increase in speed allows us to infer, or ‘retrodict’, compatible genomes from cell fate patterns. We exploit this technique to predict highly variable cell fate patterns resulting from dig-1 reduced-function mutations and let-23 mosaics. In addition to the new insights offered, we propose our technique as a platform for aiding the design and analysis of experimental data.     

Blood parameters of young calves at abattoirs are related to distance transported and farm of origin

Nonreplacement dairy calves, or bobby calves, are fasted and transported to abattoirs from as young as 5 d of age in Australia. The aims of this cross-sectional observational study were (1) to assess the welfare status, as measured by blood parameters, of bobby calves in the commercial supply chain after transport and lairage, and (2) to assess whether distance and duration of transport are risk factors for poor bobby calf welfare, as measured by blood parameters. We hypothesized that bobby calves transported greater distances would be more likely to show evidence of compromised welfare, as measured by blood indicators of hydration, energy status, and muscle fatigue or damage. We also hypothesized that there would be a large amount of variability in indicators of energy status between calves from different farms. We analyzed blood samples collected at slaughter over a spring and an autumn calving period from 4,484 Australian bobby calves aged approximately 5 to 14 d old from 3 different states, after transport, fasting, and lairage. Packed cell volume (PCV), plasma glucose, and serum urea, total protein, β-hydroxybutyrate (BHB), and creatine kinase (CK) were measured. Radio frequency identification ear tag data were used to estimate the distance that the calves were transported and to identify the farm of origin. Data were analyzed using linear mixed models, except for BHB, which was analyzed using a Goodman-Kruskal gamma test due to left censoring of the data. Twelve percent of calves showed evidence of anemia (PCV less than 0.23 L/L), and 11% had urea concentrations consistent with dehydration (urea more than 7.7 mmol/L). Thirty-six percent of calves had CK activity above normal resting values, and 1% of calves had CK >2,000 U/L, indicating muscle fatigue or damage. Distance transported had significant effects on all blood variables except urea and BHB. With increasing distance transported, calves were more likely to show evidence of a negative energy balance (low plasma glucose) or dehydration (high PCV or total protein). The estimated effect of distance overall was small, but for calves transported more than 500 km, plasma glucose concentration declined more per kilometer. The calves' farm of origin accounted for a reasonable amount of the random variation between calves for plasma glucose (20%). Our results suggest that longer transport distances may increase the risk of poor calf welfare (dehydration, negative energy balance) after transport, and on-farm calf management (e.g., nutrition, timing of feeding before transport) may affect transported calves' energy status; improving this area could result in better energy availability during fasting.     

A microfluidic toolbox for cell fusion

Cellular fusion is a key process in many fields ranging from historical gene mapping studies and monoclonal antibody production, through to cell reprogramming. Traditional methodologies for cell fusion rely on the random pairing of different cell types and generally result in low and variable fusion efficiencies. These approaches become particularly limiting where substantial numbers of bespoke one‐to‐one fusions are required, for example, for in‐depth studies of nuclear reprogramming mechanisms. In recent years, microfluidic technologies have proven valuable in creating platforms where the manipulation of single cells is highly efficient, rapid and controllable. These technologies also allow the integration of different experimental steps and characterisation processes into a single platform. Although the application of microfluidic methodologies to cell fusion studies is promising, current technologies that rely on static trapping are limited both in terms of the overall number of fused cells produced and their experimental accessibility. Here we review some of the most exciting breakthroughs in core microfluidic technologies that will allow the creation of integrated platforms for controlled cell fusion at high throughput. © 2015 Society of Chemical Industry     

Genes Involved in the Endoplasmic Reticulum N-Glycosylation Pathway of the Red Microalga Porphyridium sp.: A Bioinformatic Study

N-glycosylation is one of the most important post-translational modifications that influence protein polymorphism, including protein structures and their functions. Although this important biological process has been extensively studied in mammals, only limited knowledge exists regarding glycosylation in algae. The current research is focused on the red microalga Porphyridium sp., which is a potentially valuable source for various applications, such as skin therapy, food, and pharmaceuticals. The enzymes involved in the biosynthesis and processing of N-glycans remain undefined in this species, and the mechanism(s) of their genetic regulation is completely unknown. In this study, we describe our pioneering attempt to understand the endoplasmic reticulum N-Glycosylation pathway in Porphyridium sp., using a bioinformatic approach. Homology searches, based on sequence similarities with genes encoding proteins involved in the ER N-glycosylation pathway (including their conserved parts) were conducted using the TBLASTN function on the algae DNA scaffold contigs database. This approach led to the identification of 24 encoded-genes implicated with the ER N-glycosylation pathway in Porphyridium sp. Homologs were found for almost all known N-glycosylation protein sequences in the ER pathway of Porphyridium sp.; thus, suggesting that the ER-pathway is conserved; as it is in other organisms (animals, plants, yeasts, etc.).