不锈钢模具设计研究

本文主要对不锈钢模具材料、圆角、间隙和通气孔进行研究分析,同时指出结构设计的注意点,为不锈钢模具的设计提供参考。     

Growth hormone response to growth hormone releasing hormone in calves that differ in genetic merit for milk yield

Holstein heifer, steer, and bull calves from control (CL) and select (SL) lines of cows that differed by more than 4000 kg of milk during a 305-d lactation (SL > CL) were used to determine growth hormone (GH) response to 5 doses of GH releasing hormone (GHRH) and how this response was affected by gender, period (age), and genetic merit for milk yield. Doses (0, 2.5, 5, 10, and 20 microg/100 kg of BW) of a GHRH analog were assigned randomly to each heifer (4 CL, 4 SL), steer (4 CL, 4 SL), and bull (3 CL, 3 SL) calf and administered on consecutive days at approximately 3, 6, and 10 mo of age (periods; P1, P2, and P3). Jugular blood samples (n = 15) collected between -30 and 240 min relative to GHRH administration were used to quantify area under the GH response curve (AUC) after subtracting mean prechallenge GH concentrations. Estimates of maximum response (Rmax) and sensitivity (ED50) to GHRH were obtained from the hyperbolic dose response curves (AUC vs. dose). Data were analyzed for effects of dose, line, period, gender, and their interactions with period as the repeated effect. Prechallenge GH concentrations were not affected by genetic line, gender, or period. The AUC was not affected by line, but decreased with period and increased with GHRH dose. The Rmax did not differ between lines or among genders, but decreased with period. The ED50 did not differ between lines or among periods, but heifers were more sensitive to GHRH than steers or bulls. Although GH response to GHRH has been identified as a potential indicator of genetic merit, it did not differ between these substantially different genetic lines.     

Mechanism of Rab geranylgeranylation: formation of the catalytic ternary complex

Rab proteins are geranylgeranylated on one or two C-terminal cysteines by Rab geranylgeranyl transferase (RabGGTase). The reaction is dependent on a Rab-binding protein, termed Rab escort protein (REP). Here, we studied the role of REP in the geranylgeranylation reaction. We first characterized the interaction between REP and ungeranylgeranylated Rab using analytical ultracentrifugation and a fluorescence-based assay. We measured an equilibrium dissociation constant of 0.2 microM for the formation of a 1:1 REP-Rab complex and showed that this interaction relies mostly on ionic bonds and does not involve the two C-terminal cysteine residues. Second, we show that REP is required for recognition of Rab by RabGGTase and therefore that the REP-Rab complex is the true substrate for RabGGTase. Third, we show that free REP inhibits the geranylgeranylation reaction, suggesting that the complex is recognized by RabGGTase primarily via a REP-binding site. Our data suggest a model whereby REP behaves kinetically as an essential activator of the reaction.     

Dynamics of cyanide binding to ferrous Scapharca inaequivalvis homodimeric hemoglobin

Flash photolysis experiments have been carried out for the first time on a hemoglobin ferrous cyanide adduct with an 8 ns laser pulse. A 95% nonexponential rebinding process occurs within 2 micros after full photolysis in ferrous cyanide dimeric Scapharca inaequivalvis hemoglobin (HbI), indicating that once photolyzed the cyanide anion is not able to escape from the protein matrix and rebinds to the heme iron. The resonance Raman spectrum of the 10 ns photoproduct is identical to that of the fully relaxed deoxy derivative, indicating that in the ferrous cyanide HbI adduct protein relaxation occurs within 10 ns after photolysis. This behavior is at variance with that of the carbonmonoxy HbI derivative in which very little geminate rebinding is observed and the photoproduct relaxes with a lifetime of 1 micros. The fast relaxation of the cyanide HbI photoproduct can be accounted for by the small perturbation of the heme structure induced by cyanide binding to ferrous HbI. This is consistent with a deoxy-like conformation of the HbI ferrous cyanide adduct and implies that the pathway for relaxation involves only minor local rearrangements of the heme moiety. Photolysis experiments carried out on ferrous cyanide horse myoglobin, which can be saturated only partially, show a qualitatively similar behavior in ligand rebinding, indicating that the geminate process of the cyanide anion is a general phenomenon in hemoproteins.     

Classification of Amyloidosis by Model-Assisted Mass Spectrometry-Based Proteomics

Amyloidosis is a rare disease caused by the misfolding and extracellular aggregation of proteins as insoluble fibrillary deposits localized either in specific organs or systemically throughout the body. The organ targeted and the disease progression and outcome is highly dependent on the specific fibril-forming protein, and its accurate identification is essential to the choice of treatment. Mass spectrometry-based proteomics has become the method of choice for the identification of the amyloidogenic protein. Regrettably, this identification relies on manual and subjective interpretation of mass spectrometry data by an expert, which is undesirable and may bias diagnosis. To circumvent this, we developed a statistical model-assisted method for the unbiased identification of amyloid-containing biopsies and amyloidosis subtyping. Based on data from mass spectrometric analysis of amyloid-containing biopsies and corresponding controls. A Boruta method applied on a random forest classifier was applied to proteomics data obtained from the mass spectrometric analysis of 75 laser dissected Congo Red positive amyloid-containing biopsies and 78 Congo Red negative biopsies to identify novel “amyloid signature” proteins that included clusterin, fibulin-1, vitronectin complement component C9 and also three collagen proteins, as well as the well-known amyloid signature proteins apolipoprotein E, apolipoprotein A4, and serum amyloid P. A SVM learning algorithm were trained on the mass spectrometry data from the analysis of the 75 amyloid-containing biopsies and 78 amyloid-negative control biopsies. The trained algorithm performed superior in the discrimination of amyloid-containing biopsies from controls, with an accuracy of 1.0 when applied to a blinded mass spectrometry validation data set of 103 prospectively collected amyloid-containing biopsies. Moreover, our method successfully classified amyloidosis patients according to the subtype in 102 out of 103 blinded cases. Collectively, our model-assisted approach identified novel amyloid-associated proteins and demonstrated the use of mass spectrometry-based data in clinical diagnostics of disease by the unbiased and reliable model-assisted classification of amyloid deposits and of the specific amyloid subtype.     

Thermal,mechanical, and barrier properties of polyethylene terephthalate‐platelet nanocomposites prepared by in situ polymerization

This study used in situ polymerization to prepare polyethylene terephthalate (PET) nanocomposites incorporating Ethoquad‐modified montmorillonite (eMMT), unmodified hectorite (HCT), or phenyl hectorite (phHCT) particles to study the impact of platelet surface chemistry and loading on thermal, mechanical, and gas barrier properties. eMMT platelets reduced the PET crystallization rate without altering the ultimate degree of crystallinity. In contrast, HCT and phHCT platelets accelerated the polymer's crystallization rate and increased its crystallinity. DMA results for thermally‐quenched samples showed that as T increased past glass transition temperature (T_g), HCT and phHCT nanocomposites (and control PET) manifested precipitous drops in G′ followed by increasing G′ due to cold crystallization; in contrast, eMMT nanocomposites had much higher G′ values around T_g. This provides direct evidence of eMMT reinforcement in thermally‐quenched eMMT nanocomposites. These results suggest that eMMT has a strong, favorable interaction with PET, possibly through Ethoquad‐PET entanglement. HCT and phHCT have a fundamentally different interaction with PET that increases crystallization rate and T_g by 11 to 17°C. Water barrier improvement in eMMT nanocomposites agrees with previously published oxygen barrier results and can be rationalized in terms of a tortuous path gas barrier model. POLYM. ENG. SCI., 52:1888–1902, 2012. © 2012 Society of Plastics Engineers     

Combined-Stage Sintering Model

By focusing on the similarities between the three stages of sintering, a single equation is derived that quantifies sintering as a continuous process from beginning to end. The microstructure is characterized by two separate parameters representing geometry and scale. The dimensionless geometry parameter, denoted T, comprises five scaling factors that relate specific microstructural featuers (e.g., surface curvature) to the scale (grain diameter). Calculations of T from experimental data show (a) agreement with computer simulations of initial-stage sintering, (b) the effect of surface diffusion on T, and (c) changes in T with microstructural evolution during sintering. Application of the model to the design of firing schedules and the study of microstructural geometry effects on sintering is discussed.     

Isocyanate‐Free and Dual Curing of Smokeless Composite Rocket Propellants

Traditional composite rocket propellants are cured by treatment of hydroxyl‐terminated prepolymers with polyfunctional aliphatic isocyanates. For development of smokeless composite propellants containing nitramines and/or ammonium dinitramide (ADN), energetic binder systems using glycidyl azide polymer (GAP) are of particular interest. Polyfunctional alkynes are potential isocyanate‐free curing agents for GAP through thermal azide‐alkyne cycloaddition and subsequent formation of triazole crosslinkages. Propargyl succinate or closely related aliphatic derivatives have previously been reported for such isocyanate‐free curing of GAP. Herein, we present the synthesis and use of a new aromatic alkyne curing agent, the crystalline solid bisphenol A bis(propargyl ether) (BABE), as isocyanate‐free curing agent in smokeless propellants based on GAP, using either octogen (HMX) and/or prilled ADN as energetic filler materials. Thermal and mechanical properties, impact and friction sensitivity and ballistic characteristics were evaluated for these alkyne cured propellants. Improved mechanical properties could be obtained by combining isocyanate and alkyne curing agents (dual curing), a combination that imparted better mechanical properties in the cured propellants than either curing system did individually. The addition of a neutral polymeric bonding agent (NPBA) for improvement of binder‐filler interactions was also investigated using tensile testing and dynamic mechanical analysis (DMA). It was verified that the presence of isocyanates is essential for the NPBA to improve the mechanical properties of the propellants, further strengthening the attractiveness of dual cure systems.     

Lymphatic transport in rats of interesterified oils containing conjugated linoleic acids

In this study we examined the lymphatic transport in rats of FA after administration of interesterified oils containing CLA, with emphasis on the location of CLA and octanoic acid in the TAG. The oils were produced by enzymatic interesterification. Eight oils with different structures or FA profiles were examined in this study: MCM, CMC, OCO, and COC, where M was expected to be octanoic acid and O oleic acid. In group 1, C was CLA as a mixture of the two CLA isomers c9, t11 or t10, c12, and in group 2, C was mainly the isomer t10, c12. Rats were subjected to cannulation of the mesenteric lymph duct, and the following day they were intragastrically administered one of the oils and lymph samples were collected for 24 h. The lymphatic transport of total FA from 0 to 8 h in group 1 was significantly (P < 0.05) higher for the OCO-1 and the COC-1 oils than for the CMC-1 oil. Similarly, in group 2 the transport was higher for the OCO-2 oil than for the CMC-2 oil. The recovery of both of the CLA isomers examined was similar (50-70%) and independent of the isomer, oil structure, and FA profile, whereas more octanoic acid was recovered from the CMC oils than from the MCM oils. The results indicated that the FA profiles and the position of octanoic acid had only a minor influence on the absorption of CLA.