Characterization and screening for mutations of the growth arrest-specific 11 (GAS11) and C16orf3 genes at 16q24.3 in breast cancer

BACKGROUND: Both fibroblast-mediated cytokine gene therapy and bone marrow transplantation (BMT) have proven to be efficient protocols for the recovery of bone marrow depression. In this report, the effects of fibroblast-mediated interleukin (IL)-6 gene therapy, in combination with BMT, on the recovery of irradiation-induced bone marrow depression were investigated. METHODS: NIH3T3 fibroblast cells engineered to secrete IL-6 (NIH3T3-IL-6) or NIH3T3 cells transduced with the neomycin gene (NIH3T3-Neo), in combination with 10(7), 10(6), or 10(5) syngeneic bone marrow cells, were implanted into irradiated mice. RESULTS: The platelets and white blood cells in the peripheral blood of the irradiated mice increased greatly 12 days after implantation of NIH3T3-IL-6 cells and BMT, the white blood cell counts were restored to a normal level 32 days after the combined therapy, and the platelet number was obviously higher than that in mice implanted with NIH3T3-Neo and BMT. Twenty and 25 days after the combined therapy, the mice showed accelerated recovery of colony-forming unit (CFU)-granulocyte/macrophages and CFU-megakaryocytes when compared with the mice implanted with NIH3T3-Neo cells and BMT. Ten days after lethal irradiation with gamma rays, the spleens formed more CFU-spleen in mice implanted with NIH3T3-IL-6 cells and BMT than in mice injected with phosphate-buffered saline or NIH3T3-Neo cells. Combined therapy with NIH3T3-IL-6 cell implantation and BMT delayed the survival period of the hematopoietic-depressed mice significantly when compared with therapy with NIH3T3-Neo cell implantation and BMT. CONCLUSIONS: These data demonstrated that the combined therapy of fibroblast-mediated IL-6 gene therapy and BMT could significantly promote the recovery of irradiation-induced hematopoietic depression.     

Ion microbeam radiation system

An ion microbeam radiation test system has been built for studying radiation-induced charge collection and single event upsets in advanced semiconductor circuits. With this system, it is possible to direct an ion beam of a diameter as small as 1 μm onto a circuit or test structure with a placement accuracy of 1 μm. The components of the system and its operation are described. Applications are described which demonstrate the capabilities of the system     

The induction of preferred orientation in a liquid crystal co-polyester by extrusion and drawing

It is shown that liquid crystal polyester can be extruded and drawn from the melt into fine fibres which possess stiffnesses up to 68 GPa. Thicker fibres with smaller draw ratios have correspondingly lower stiffnesses, which are correlated with molecular alignments characterized by flat plate X-ray diffraction. Fibres with a range of diameters were heat-treated over a range of temperatures to determine the effect of annealing on preferred orientation and stiffness. Heat-treatment of as-spun fibres produced maxima in axial stiffness at 170° C, corresponding to an increase in preferred orientation, and 270° C, corresponding to the development of quasi-crystalline order which is analysed. Scanning electron microscopy showed the existence of needle-like domains of approximately circular cross section up to 0.8 m in diameter. These were aligned in the direction of drawing in contrast to being haphazardly arranged in a hot rolled specimen displaying no preferred orientation.     

Some mechanical properties of an epoxy resin system cured with multiple crosslinking agents

Arbitrary cure times and glass transition temperatures are reported for an epoxy resin cocrosslinked by various weight fractions of hexamethylenediamine (HMDA) and m-phenylenediamine (m-PLDA). The glass transition temperatures of the epoxy resin systems studied yielded an excellent fit to an empirical equation developed by Dyvik for copolymers. The cure time parameters were found to be a linear function of the weight fractions of each crosslinking agent present. The mechanical properties of the epoxy resins were measured by an in situ dynamic modulus technique which employed the use of a resin-coated metallic substrate.     

Chlorination of polystyrene

Chlorination of a low molecular weight polystyrene in the α position was studied by following changes in the infrared spectrum, glass transition temperature, and molecular weights of the polymer. The logarithm of the absorbance ratio at 2920 and 1500 cm^?1 as a function of mole per cent chlorination was linear. The glass transition temperatures, determined by use of a differential scanning calorimeter (DSC), were found to obey an equation developed by Dyvik for copolymers. The molecular weight of the chlorinated polystyrene decreased as a function of chlorination.     

Cure rates of some epoxy systems

The property changes of Epon 828 crosslinked by either diethylenetriamine or m-phenylenediamine at several temperatures have been studied by two in situ techniques. The mechanical property changes were followed by continuously monitoring the changes in the fundamental frequency of vibration during cure of a resin-coated substrate acting as a cantilever reed. The disappearance of the reactive epoxy group was followed in situ by continuously monitoring the absorbance of the infrared epoxide band at 915 cm.^?1. Correlation of the two techniques was accomplished by normalizing both the mechanical property and infrared data. The apparent energy of activation was calculated to be 10.4 and 11.4 kcal. /mole, respectively, for the m-phenylenediamine and diethylenetriamine systems by the mechanical technique, and 11.0 kcal./mole for the m-phenylenediamine crosslinked system by the infrared technique.     

Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part I, Experimental Observations

Cylindrical buttuohead specimens of an advanced silicon nitride were tested in uniaxial tension at temperatures between 1422 and 1673 K. In the range 1477 to 1673 K, creep deformation was reliably measured using high-temperature contact probe extensometry. Extensive scanning and transmission electron microscopy has revealed the formation of lenticular cavities at two-grain junctions at all temperatures (1422–1673 K) and extensive triple-junction cavitation occurring at the higher temperatures (1644–1673 K). Cavitation is believed to be part of the net creep process. The stress rupture data show stratification of the Monkman–Grant lines with respect to temperature. Failure strain increased with increase in rupture time or temperature, or decrease in stress. Fractography showed that final failure occurred by subcritical crack growth in all specimens.     

High temperature swelling of coal/tetralin mixtures in a high pressure microdilatometer

High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min^{− 1} under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments.     

Characterisation of flucloxacillin and 5-hydroxymethyl flucloxacillin haptenated HSA in vitro and in vivo

Flucloxacillin is a synthetic penicillin used in the treatment of Staphylococcal infections. Adverse reactions to the drug are believed to arise through covalent modification of proteins, with tissue damage occurring secondary to an immune reaction. Serum proteins have been shown by adduct-specific antibodies to be modified by flucloxacillin, but the nature and sites of modification have not been characterised. Here, in vitro studies on HSA have shown by MS that the modification of protein lysine residues occurs in a dose-, time- and site-dependent manner. Affinity, cation exchange and reversed phase chromatography prior to MS revealed in vivo modification of HSA with flucloxacillin in tolerant patients, with up to nine modified lysine residues being detected in each patient, and with modification of Lys190 and Lys212 being detected in 8/8 patients. It was also revealed for the first time that plasma proteins could be modified with the 5-hydroxymethyl metabolite of flucloxacillin, and that essentially the same Lys residues were targeted by both the parent drug and its metabolite. This study provides a detailed characterisation of sites of chemical modification of an endogenous target and reveals candidate peptides for T-cell and antibody assays of flucloxacillin hypersensitivity.